I was working to connect two networks with two routers, I spent 3 days trying to figure our where is the problem, and finally I found out that one of the networks has no default gate way hhhhhhhhhh yeah I was so confident, I checked everything but not the default gateway as I was sure that it was configured hhhhhh thanks dude u saved me after all ...
Hi I enjoy ur video. I love the way you arrange your parameters it makes it easier to understand. I configure 3 network with 9 host,2 router and 2 switch and it worked. Thanks for the video
Zac Smith later i will send you picture of my homework or something like that, so you can do it but dont have to, i will have test from configurating trought CLI so i have to be ready for that, i wanna work hard to learn some new things about networks and things around it, and thank you again :) and you have nice English so i can easily understand you
Such a sexy tutorial! (Pardon my way of description but that is how I describe something that I find indulging and inspiring) Your tutorial helped me learn so much!
You are right Sam..You don't and can't give a layer 2 switch interface an IP address... You can assign an ip address to a Vlan but this is for management purposes.
If i added another network via WAN, with IP 192.168.5.0/24 connecting to the 192.168.3.0/24 network.. I would use 192.168.4.0/30 in between correct? I'd like to know how the ip route configs would look like on each router so the local LAN can communicate with each other..
You are right Sam..You can't give a layer 2 switch interface an IP address its physically impossible... You can only assign an ip address to a Vlan but this is for management purposes only
Only on the Serial connections. One end is DCE and the other is DTE, normally, the clock rate provided by ISP, which would be the DCE end. Default is 64000. Which represents kb/s. The higher the better speed.
Hi sir when im using ip address of class A like-->(R1)10.0.1.0,(SW1)10.0.2.0,(R2)10.0.3.0,(SW2)10.0.4.0.then it is showing overlaying error,what does it mean?will you explain it please.?
Thanks alot, your teaching was so basic, step by step and easy to understand. Now i understand it very well. Thanks soo much
best combo of a common entry level scenario combined with gentle and detailed voice support, thx heaps!
Best video have seen so far after searching for hours. Many thanks.
Greetings from Papua New Guinea
Thank you!
Finally I could understand how to configure routers,switches and PCs. Brilliant video.
One of thee best tutorial videos I've seen on the net!!!
Thank you so much!
This video is gold for those who are really into networking. Thanks for your time and effort to make this video.
thanks bro i have finished my networking exam watching your videos'.your videos use full to every one 😇
You are a champion. God used you to help me understand this well. God bless you
I was working to connect two networks with two routers, I spent 3 days trying to figure our where is the problem, and finally I found out that one of the networks has no default gate way hhhhhhhhhh yeah I was so confident, I checked everything but not the default gateway as I was sure that it was configured hhhhhh thanks dude u saved me after all ...
Sir Lots of Love from Pakistan.
Iv seen only one video of your's
and you have proved in 14 mins that you really are brilliant teacher.
Your awesome you've just helped me solve an assessment I have spent weeks trying to get working :)
Hi I enjoy ur video. I love the way you arrange your parameters it makes it easier to understand. I configure 3 network with 9 host,2 router and 2 switch and it worked. Thanks for the video
Omg this is what I've been looking for ! thanks man!
Awesome explanation
You have a great teaching ability. Thank you so much I learned that routing between 2 networks with using 2 router, thank you again
Thank you so much spent so much time trying to find out why mine wasnt working hadnt done the ip route part
This is the only video that makes sense in this topic
Has been awesome for real
The best explanation I've seen, nice work man
10/10 very well explained. good on you
Thank you, that helps me a lot, my teacher is a clever guy but he is explaining some new things too fast so i have to study at home
Zac Smith later i will send you picture of my homework or something like that, so you can do it but dont have to, i will have test from configurating trought CLI so i have to be ready for that, i wanna work hard to learn some new things about networks and things around it, and thank you again :) and you have nice English so i can easily understand you
Great tutorial. Very brilliant instructor.
best video ever clear and sharp
great teaching...
i want to learn more about configuring the network
Thank you Zac. been looking for several videos and this video answered my question.
You saved me Ive had to make this for school, thank You mate
Great video, thank you for posting it has been a lot of help. Question: Do we not configure port ip addresses on the switches?
Sir you're a genius
Great video, thanks for the content!
you saved my life... thanks
Like it's comprehensive nature
Best explanation 😍
Thank you! Just what I needed!
Such a sexy tutorial! (Pardon my way of description but that is how I describe something that I find indulging and inspiring) Your tutorial helped me learn so much!
Thanks
That was fantastic!
Really grateful mate!
Thanks from KSA
Thanks a lot Teacher!
thanks bro really helpful video
Great tutorial!!
Great video thank you
What is the additional steps u must take when there's a switchboard in between the two routers?
Thank you Zac
i have a question please, dont we need to setup a Vlan address on the switches?
You sir have saved my bacon. Thank you! Brilliant video and explanations were on point - unlike top heavy theory on layers. o7 Much appreciated.
Very helpful, ty. One question though, can we use RIP command instead of ip route here?
You saved our life
why can't i send to pcs in other networks
Also those 2 routers are in 2 different places. so there is ISP ( internet service ) will come. So how we configure other network through Internet?
You are right Sam..You don't and can't give a layer 2 switch interface an IP address... You can assign an ip address to a Vlan but this is for management purposes.
Helpful! Thanks.
Thanks.. Sir
3:31 Do switches have IP addresses? Don't they act on the 2d OSI layer?
how do we configure the same network if we added a server?
really awesome tnx
06:12 Configuration | Routers
Why Serial Ports? Aren't they outdated?
If i added another network via WAN, with IP 192.168.5.0/24 connecting to the 192.168.3.0/24 network.. I would use 192.168.4.0/30 in between correct? I'd like to know how the ip route configs would look like on each router so the local LAN can communicate with each other..
good to see this
really awesome thaxz
Thanks mate.
Good one.
hi , thank you for this configuration .. but where is the configuration of switch .. you didn't make it ??
Nice
how do you add a firewall to this topology?
fantastic
thank you so much..
thank you sir
Thank you
why you not entered the DNS
How can i connect them to internet?
Why do the switch ports need IP adresses. Definately not needed. Switches use a mac table
Switches need IP addresses in cases where you need to ssh/telnet in , also when u have a managed switch and you need to log in and send SNMP traps.
when I am trying to make ip route it gives me invalid next hop address (it's this router) . why does this appear?
You maybe set up IP address on interface serial 0/0/1 on the first router. But it is hard to say, I need to see full configuration.
Why do we have ip address in switch?? Isn't it only data-link layer device? I am so confused..Helppp
You are right Sam..You can't give a layer 2 switch interface an IP address its physically impossible... You can only assign an ip address to a Vlan but this is for management purposes only
the best tutorial!
while i executed the command ip route ..it showed me Inconsistent address and mask
why i am receiving this line????
you have done in correct subnetting...
For switch why ip address? there is no Vlan
why we need clock to connect two router
Only on the Serial connections. One end is DCE and the other is DTE, normally, the clock rate provided by ISP, which would be the DCE end. Default is 64000. Which represents kb/s. The higher the better speed.
Hi sir when im using ip address of class A like-->(R1)10.0.1.0,(SW1)10.0.2.0,(R2)10.0.3.0,(SW2)10.0.4.0.then it is showing overlaying error,what does it mean?will you explain it please.?
@@CodeShockDev 255.0.0.0
Hlo can anyone tell me the purpose of using ip route as i am new to all this
Thank you
Why the he'll he need 2 routers, you need only one
grt (Y) (Y) (Y)
Thanks
It's not connecting between two router though I've followed your video. Who i can check why it is not working?
HOW*
@@mujahidulislam1277 is it working now ??