One month update: (Two things make sure you look at the switch page correctly. I had number one incorrect it was opposite of #1 (white square is the switch location that is the only important one for communications). Second use the “CAN” port to make sure the batteries can communicate properly with the inverter) I could NOT find a video where someone walked through hooking up the EG4 LL Server Style Batteries and Configuring them all in one. Please let me know if you like this type of content and if it helps you with your DIY Solar Setup! ➡ Check out Signature Solar: (I Purchased the 6000XP Inverter Package) signaturesolar.com/?ref=zwzcpllh ("ChumpChangeXD" For $50 Off) ➡ Check out Tangem: (My Favorite Hardware Wallet) tangem.com/pricing/?promocode=CCXD
Good job, congrats. Nice connection of positive and negative to the bus bar. Even if the system isn't in production, when all the panels are connected turn them one and after the batteries to have them full charged and start to balance the cells.
Very clean setup! Really enjoyed how you show off the EG4 LL-S batteries with the EG4 6000XP. Thank you for providing a clear explanation when explaining what you're doing and why. Looking forward to the upcoming videos. Keep it up!
No worries at all my man! Glad to help. Only thing I would change is put the top battery “can” port into the 6000XP (per manufacturer) this was not clear in the book of the batteries…
Nice work on this one. These inverter still do need to be precharged. Fortunately the LL’s come with built in precharged resistors. Turn the breaker of a single battery on, and the battery breaker on the inverter as well. Then power up the BMS on the single battery. It will automatically precharge the inverter. Then you can cycle the rest of the batteries on. The fact that these batteries come with resistors is an awesome feature that most people don’t pay attention to.
@@GavinStoneDIY yeah I tried a bunch of stuff yesterday with technical support. They were fantastic but I need to get a firmware cable to be able to try and update the batteries I think.
Place orange wire to CAN port on battery. Also turn on inverter battery breaker first and turn on one battery breaker, then push power button on battery bms. This ensures the charge resistor has a chance to send power to the inverter first. The way u did it full power is sent to the inverter capacitors and could lead to a failure due to a large in-rush of current,
Yes you are correct I had to move this yesterday. The manual image was incorrect. I will explain this in one of my follow up videos once it’s all up and working properly
Yea I will for sure I’m trying to figure out the settings as we speak! I think it’s basically plug and play I just have an issue with firmware I think so I need a cable to update it
@CCXD dude i truly like the LL’s batteries very nice, BTW i would think the P01 EG4 protocol would be the one to use since the batteries are from EG4 . P03 is LuxPowertek , so i think it the batteries are setup for LuxPowertek protocol so you had to make the inverter use the P03? I’ll like to see a list of protocols on the 6000XP strange it’s not like the 6500EX and if so you can use the P01 protocol on both device if they support it..
Where in the manual does it say select luxury for the 6000xp. They are all labeled as eg4. Batteries and inverter. Mine just says eg4/lux as a selection.
One month update:
(Two things make sure you look at the switch page correctly. I had number one incorrect it was opposite of #1 (white square is the switch location that is the only important one for communications). Second use the “CAN” port to make sure the batteries can communicate properly with the inverter)
I could NOT find a video where someone walked through hooking up the EG4 LL Server Style Batteries and Configuring them all in one.
Please let me know if you like this type of content and if it helps you with your DIY Solar Setup!
➡ Check out Signature Solar: (I Purchased the 6000XP Inverter Package)
signaturesolar.com/?ref=zwzcpllh
("ChumpChangeXD" For $50 Off)
➡ Check out Tangem: (My Favorite Hardware Wallet)
tangem.com/pricing/?promocode=CCXD
Good job, congrats. Nice connection of positive and negative to the bus bar. Even if the system isn't in production, when all the panels are connected turn them one and after the batteries to have them full charged and start to balance the cells.
Cris cros is the correct way 👌 watching from the UK 🇬🇧
Appreciate you 🙏🏻
Awesome setup. I love how those fit into a server rack. Very nice and clean design!
Very clean setup! Really enjoyed how you show off the EG4 LL-S batteries with the EG4 6000XP. Thank you for providing a clear explanation when explaining what you're doing and why. Looking forward to the upcoming videos. Keep it up!
No worries at all my man! Glad to help. Only thing I would change is put the top battery “can” port into the 6000XP (per manufacturer) this was not clear in the book of the batteries…
Nice work on this one.
These inverter still do need to be precharged. Fortunately the LL’s come with built in precharged resistors.
Turn the breaker of a single battery on, and the battery breaker on the inverter as well. Then power up the BMS on the single battery. It will automatically precharge the inverter. Then you can cycle the rest of the batteries on. The fact that these batteries come with resistors is an awesome feature that most people don’t pay attention to.
Thanks brotha! Now I’m running to an issue where the inverter will not recognize the battery I think I need to firmware update something… PITA! 😂
@@ChumpChangeXD could be firmware. But it’s probably just the lithium setting. Choose lithium 0. And use CAN protocol, not rs485
@@GavinStoneDIY yeah I tried a bunch of stuff yesterday with technical support. They were fantastic but I need to get a firmware cable to be able to try and update the batteries I think.
@@ChumpChangeXD ah well. That updates pretty easy. And after this you can do future updates through the inverter online without using cables
So Jealous! I love those rack mount batteries, super convenient
I want more and they not even up and running 😂
Place orange wire to CAN port on battery. Also turn on inverter battery breaker first and turn on one battery breaker, then push power button on battery bms. This ensures the charge resistor has a chance to send power to the inverter first. The way u did it full power is sent to the inverter capacitors and could lead to a failure due to a large in-rush of current,
Yes you are correct I had to move this yesterday. The manual image was incorrect. I will explain this in one of my follow up videos once it’s all up and working properly
Good for you CCXD. Awesome work!
Congratulations looks great 👍
Thanks brotha 🙏🏻
looking great!
90k BABY!!!!! WOOOOOOOO!
Thanks brotha 🙏🏻
Great video. Please share the setting on the Inverter for this battery setup. Thank you.
Yea I will for sure I’m trying to figure out the settings as we speak! I think it’s basically plug and play I just have an issue with firmware I think so I need a cable to update it
Sweet setup jealous
Thanks brotha
Versidium's impact on payment could be revolutionary. Glad to be in early!
My top picks for bull run are DOT, FIL, and SOL. And best ICO to invest is Versidium, huge potential.
Versidium's team is top-notch. Expecting big developments soon!
@CCXD dude i truly like the LL’s batteries very nice, BTW i would think the P01 EG4 protocol would be the one to use since the batteries are from EG4 . P03 is LuxPowertek , so i think it the batteries are setup for LuxPowertek protocol so you had to make the inverter use the P03? I’ll like to see a list of protocols on the 6000XP strange it’s not like the 6500EX and if so you can use the P01 protocol on both device if they support it..
I messaged the guy from Signature Solar and he said yes I need to configure it for Lux Power prior to me doing that
What's your plan for heat mitigation? Do you have any air movement across the batteries?
Directly across no. There is plenty of air movement in that trailer but I will be re designing that sooner than later
Presale investments have been my go-to, and Versidium is my latest pick. Early birds catch the worm!
Versidium keeps popping up in my crypto circles. Seems like a rising star!
Why did you only program the first battery for LUX? Do All batteries need to be changed to LUX?
Where in the manual does it say select luxury for the 6000xp. They are all labeled as eg4. Batteries and inverter. Mine just says eg4/lux as a selection.
I asked the rep. If it says EG4/LUX your good
Do you think Versidium will pump before XRP?
🍜🍜🍜🍜🍜
Killer
In the next bull run, keep an eye on DOT, VRA, and SOL, but don't overlook Versidium's VRS token
Too much jazz hand
Just took first place for worst comment of the day 🤡
stop with the hands! what is it with this trend?!
What are you taking about lmao. You want to stair at a man’s face the entire time? Creepy AF. Grow up.
Really nice job. 👍
Thank you!