How To Fix Dyson V7 Pulsing | Dyson V7 Pulsating Problem Fix | Featured Tech (2020)
ฝัง
- เผยแพร่เมื่อ 4 พ.ย. 2020
- Hey everyone, in this video, I will be sharing a Dyson V7 pulsating problem fix. I know a lot of you are having this problem since it is pretty common and if you haven't figured out what is causing it yet, I have good news for you! Here is the FIX!
Just Filters
amzn.to/38gCABs
Battery and Filter
amzn.to/3c5JTNU
►Check out these free trials from Amazon
Audible Plus amzn.to/380vfER
Audible amzn.to/3b70ZKL
Prime Music amzn.to/3uJTAIN
Prime Student amzn.to/3sD9PWk
★☆★ Thank you so much for watching my video! Hope you enjoyed it, make sure you like, comment, share and SUBSCRIBE to my channel and click the 🔔 icon for notifications when I post a new video. If you have any questions or requests feel free to leave them in the comments below.
The Dyson V7 Motorhead cord-free vacuum has 75 percent more brush bar power than the Dyson V6 cord-free vacuum. Engineered for all floor types, the direct-drive cleaner head drives bristles into the carpet to remove ground-in dirt. The Dyson V7 Moorhead cord-free vacuum quickly transforms to a handheld for quick clean UPS, spot cleaning and cleaning difficult places. Cleans hard floors with extra power for carpets. With 2 additional tools. Up to 30 minutes of powerful fade-free suction. Trigger releases instantly. Battery power is only used for cleaning. The direct-drive cleaner head drives bristles deep into the carpet to remove ground-in dirt. It has 75Percent more brush bar power than the Dyson V6 cord-free vacuum. Transforms to a handheld for beyond the floor cleaning. Hygienic dirt ejector empties dust from the bin in a single action. 2 tier radial tm cyclones - 15 cyclones, arranged across two tiers, work in parallel to increase airflow and capture fine dust. Max power mode provides up to 6 minutes of higher suction for more difficult tasks. Balanced for cleaning up top, down below and in between. All Dyson cordless vacuums quickly convert to a handheld for quick clean UPS, spot cleaning and cleaning difficult places. Convenient docking station stores and charges the machine, and holds additional attachments. So it's always ready to go. Dyson received the highest numerical score among stick vacuums in the J.D. Power 2017 Vacuum Satisfaction Study, based on 6,965 total responses from 7 companies measuring the opinions of consumers who purchased a stick vacuum in the previous 12 months surveyed in February-March 2017. Your experiences may vary. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they or their vapors may be present. Suction power is up to 100AW.
Check out some more awesome videos from Featured Tech:
► How To Replace Your Beats Solo 3 Ear Pads (Wireless & Wired) | BEATS Ear Pad Replacement Tutorial: • How To Replace Your Be...
► 3 NEW BEST 2019 MacBook Pro 16 inch Accessories (Part 2): • *3 NEW* BEST 2019 MacB...
► The PERFECT Lighting Kit for Photos & Videos: Westcott Solix LED Light Compact Kit Unboxing & Review: • The PERFECT Lighting K...
► TOP 3 Must Have Apple Watch Accessories for 2020: • TOP 3 Must Have Apple ...
► Philips Smoke-less Indoor Grill with Infrared Heat Technology [Unboxing] | Featured Tech (2020): • Philips Smoke-less Ind...
► Apple Watch Series 5 GPS 44MM Space Grey Aluminum Case Sport Band Unboxing | Featured Tech (2020): • Apple Watch Series 5 G...
► Top 6 BEST 2019 MacBook Pro 16 inch Accessories | Featured Tech (2020): • Top 6 BEST 2019 MacBoo...
► $300 Tooth Brush! Is It Worth It? Philips Sonicare DiamondClean Smart 9700 Unboxing & First Look: • $300 Tooth Brush! Is I...
► How To Pair the Beats Solo Pros The Easy Way: • How To Pair the Beats ...
► 2019 MacBook Pro 16 inch UNBOXING & First Look: • 2019 MacBook Pro 16 in...
► Beats Solo Pro Wireless Noise Cancelling On-Ear Headphones Unboxing: • Beats Solo Pro Wireles...
► Beats Solo Pro Wireless Noise Cancelling On-Ear Headphones Review: • Beats Solo Pro Wireles...
► Beats Solo Pro vs Solo 3 Wireless: Which one should you buy?: • Beats Solo Pro vs Solo...
► Bagotte Vacuum Cleaner 60 Days Review Update - Is It Worth It?: • Bagotte Vacuum Cleaner...
► Solar Camera GIVEAWAY RESULTS & SPECIAL ANNOUNCEMENT (2020): • Solar Camera GIVEAWAY ...
#dyson #howto #pulsing
Thank you for watching the video: How To Fix Dyson V7 Pulsing | Dyson V7 Pulsating Problem Fix | Featured Tech (2020)
►FULL DISCLOSURE:
Featured Tech is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees (commission) by advertising and linking to amazon.com - วิทยาศาสตร์และเทคโนโลยี
So this video was awesome for helping me to figure out why my fancy vacuum suddenly stopped working. It turned out to be the first problem with the dirty filter. But I just wanted to add a few comments from my own troubleshooting.
1) If you are trying to diagnose which of the two problems it is, disconnect all of the accessories from the vacuum unit. If the problem persists, it must be the filter.
2) If, like me, waiting for the filter to dry out is unacceptable, and you'd rather spend the money for a new filter on blackjack and strippers, you can restore life to it very quickly by blowing compressed air through the filter. Make sure you do it outside as every piece of fine dust you ever vacuumed will come flying out.
If you don't have an air compressor like me, you can pick up cans of compressed air at any electronics-y store. You could also try whaling on a bike pump for ultimate low cost cleaning.
Hi Tyler, I'm glad the video helped you out.
This was the third video I watched on this problem and the one that solved my problem. A small piece of plastic wrapping material had been suched up into the vacuum head and blocked the air flow. Pulled it out with shears, got the other stuff out and presto! it worked. Thank you so much. It's good to find someone who knows what they're talking about. Five stars!
Thank you. It was a dirty roller issue. Problem solved.
Thank you so much for this video! I had checked the filter, and looked inside the head, but couldnt see anything. When I removed the head, though, I found so much! It must've started with a leaf, and just kept piling up from there. I would never have saw the mess without your video. You Rock!
Wow, thank you for this life-transforming video! I gave literally no thought to ever changing my filter because it didn't look dirty. But, low and behold, when I put a new one in, not only did it stop the pulsing, it suddenly was sucking things up better than ever!
Thank you all fixed and working again. I went a little further into the dust collection barrel and there was a blockage in there. But would never have thought to look without your help 👏🏻👏🏻👏🏻
First time I’ve ever commented on a TH-cam video. I didn’t even know there was a “suction port”. Thank you very much for saving me from ordering a new battery!
I knew about the filter issue but my Dyson was still having issues. So glad I watched this, cleaning the suction port solved the problem. Thanks!
Solved in minutes!!! Saved me a $90 diagnostic fee. Thanks man. under the plastic casing is really hard to clean.
After owning my V7 for several years on my third battery, I was shocked to discover this pickup design. It's an accident waiting to happen. Also discovered that Dyson designed this pulsating feature to prevent the motor from overheating and sefl destructing. Great video!:)-John in Texas
Thank you, sorted my problem. I tried everything all but the filter as I recently washed it. Gave it a wipe over with a dry cloth and happy to say it's working fine now.
l ordered some spares so I don't have to wait for it to dry.
Problem solved! You’ve made my wife very happy! Thank you, sir!
Many thanks most helpful. Was blocked badly.
Just saved me a lot of money buying a new cleaner.
Cheers 👍
Thanks man - my v7 was pulsing - I cleared out the hole u mentioned and its working 100% now.
Great vid.
Thank you so much! This fixed my V7! It had a blockage near the brush bar. I was about to buy a new vacuum. You rock!! 👍👍
Thank you , I was able to dissemble , cleaned and put it back together. Your video is very clear . 👍👍👍👍
Thank you so much for this video. Cured my issue before I bought another battery or trashed it all together.
Thank you for the video. I have watched others trying to figure out the pulsing problem. I cleaned the filters and still did the pulsing. I put one of the small attachments on and no pulsing, so after your video, figured it must be the suction port. I looked at the underneath side and it needs cleaned. Praying that takes care of my problem. I was already looking for a replacement vacuum.
Thank you for clearly explaining the steps. This is the 4th video I've watched to try and fix my pulsating Dyson v7. You're the first one to show how a clogged suction hole can cause this.
My handheld vacuum works like a dream again! Thank you.
Agreed, I've seen several on the pulsating problem and sure enough this was the cause and the first to point me to what I needed to solve it - thank you!
Worked for me! Thanks for the video!
Thank y😊 for this video. We were unaware of the of second solution and just fixed our machine. Wow so much dust and hairs stuck. All clean now 🙌
I rarely comment on videos, but this was crazy helpful. Thanks!
Problem sorted!!! Great advice.
Dude! This worked like a charm! Thanks
The second solution solved my issue! Thanks alot for the video!
Thanks for the tip. I didn't even know that's where the filter was. Blew it out with compressed air and it's all good
Fantastic thanks!
I knocked the heck out of the filter and some stuff came out, popped back in and we’re good to go! Thank you sir !
My world is usually not fixed by quick & easy tricks but I followed your video and found a dried up leaf stuck up the suck tube - poked it out and it then worked OK. Thanks a lot from The Balearic Islands.
Thank you for this video, it helped fix my vacuum!!
Fantastic, knew about the filter but unblocked the suction vent and hey ho, good to go.
Thank you 😊 🌟🌟🌟🌟🌟
Thanks for the fix. Great job.
Thank you this fixed it as in, after tapping the air filter tons of dust came out and suddenly, no more pulsing.
thankyou. your first suggestion with the filter cleaning did the trick. terrific.
Great video! I am considering buying the V7 and this is problem solving in advance.
Awesome - fixed!!! Thankyou!
Thanks, Dyson now working stronger than ever!
You solved my problem! Thanks!
Learned how to dissemble n clean it. Thank you so much
Top Man, Now I know why my Stepmother Dyson Version 7 & kept on stopping starting. Cheers for the remedy 😇😇😇
Thank you! Is working and my wife is Happy Happy Happy!
Thanks so much it’s very helpful 🙏
That fix worked!! Thanks so much!!!😀
Awesome---fixed my problem thx!
I wish I had seen this video earlier...well done !
Thank you so much you helped me immensely❤
You just saved me a bunch of money! Thanks
Thank you this helped 😁
Thank you so so very much!!! Problem solved cleaning out the beater brush!
Great video! Thought I had a bad battery, but it was actually just clogged.
thank you very helpful!
Thanks sooo much! Yep…filter needed cleaning….thanks again, saved from buying a new machine!
Thanks! Cleaning the clogged suction tunnel fixed the problem.
Omgosh, the brush was clogged with dust and Corgi hair. I had tried other suggestions and they didn't work. I was about to toss it and buy a new one. Thanks so much!!
Great video solved my problems thanks
Thanks very helpful
You solved my problem Bud! Thanks
Thank you!!
Thank you!
Wow thank you 🙏
Second solution fixed our issue 👌🏼
I unclogged the roller brush and we recently replaced the filter. Still not working. We are stumped. I also replaced the battery. Not sure what else we can do. Any thoughts or ideas greatly appreciated.
Thank you, thank you, thank you!
Thanks for the video. I bought new filters, a battery.........after watching I checked and it was clogged up. Thanks for the help
I have checked everything you said in your video and changed the filter{I have 2 filters} the vacuum is still pulsting. The battery was changed just over a yea r ago.What can I do next. Thank you for any help you can give.
I have an issue. In a different video it instructed to take back off the battery pack and clean a donut shaped piece of foam which is topped with a solid round piece of foam. What are these called? Where would I find replacements?
Thank you for helping me fix the vacuum i wqas ready to buy a new one
Thank you!!!
Mine was pulsating as well. Found the clog at the vacuum port where there's a flap door before entering the unit and the dust cup. Fixed!
Thanks, piece of cardboard had blocked the head. I had to remove the side as you suggested and bingo.
Shoulda looked here before a bought the new battery !
Thanks
Yup it worked all clogged up at the bottom on the hose. Thanks.
Thanks for this video it was the filter that was causing the issue for me! Darn thing still looks clean though
Which one to use maximum or higher suction on v7dyson
Please advice
Thxs
Thanks! New filter didn't solve the problem -- helped but with the rug tool attached it still pulsed. Just pulled a ton of stuff out of the tube. Had no idea this could happen.
So things can be stuck in the tube not just the head itself ! my filters look clean so I’m going to try to take everything apart and see if I can find anything stuck in the tube itself ..cross your fingers for me
Thank you
Thank you! I was about to buy a replacement battery for my V10. I pulled the filter, brushed it with a stiff brush, put it back together. Voila! Problem solved. I probably caused it by vacuuming carpet powder.
I've got my motor out of the body of the dyson and putting 21.6v to the motor with a DC power supply and it's still pulsing. Any advice or should I just replace the motor?
Thanks for the tip. Mine was clogged at the roller.
I can’t get the brush to spin. Do you know what that might mean or how to fix it?
I have a Dyson V7 the motorhead not spinning I cleaned it multiple times. it spins for few seconds then it stop again. any idea or any advice will be greatly appreciated
What if the pulsing only happens when ANY attachment is added on. Vacuum sucks fine on its own but as soon as I had any of the attachments, it pulses. I've cleaned every attachment. Could it be a connectivity issue?
So what happens if you cleaned the entire vacuum, and you waited 24-48 hours for the filters to dry and it works fine with the top filter alone but it won’t work as soon as a put on the back filter? I have nothing attached to it.
Thanks dude. Removal of roller did it for me. Was blocked and I couldn't see.
Could the issue ever be that the batter has worn out? I just saw this video now but thought my V7's rechargable battery has run its course so I ordered a new one. I'm just waiting for my filter to dry & if that fixes the pulsating V7 I'll send back the battery.
Helped me fix mine! Turned out to be full of 2 years worth of my Mrs and Dogs hair 😂😂
Worked for me! My problem was at the roller - Christmas tree pine needles! :-)
Thanks for saving me to spend money on a new vacuum cleaner. I pulled out so much long hair (my wife's) that you wouldn't believe it 🤣
Thanks. Fixed mine right now. Clogged at the brush head.
Filter and base are clean. Any more ideas?
In my case I found a red door in the suction port was stuck closed. Pushing it open made the pulsing problem go away-not sure if it caused any other problem though!
Thank you it was clogged 😊
I did all the things that you suggest. With filter out it works fine. I put in brand new filter and it pulses still
My Dyson V7 is working good in eco mode but in booster mode it stop working under 1 minute. Any idea how i can fix this?
Clean the filter in unplugged it and it doesn't I don't know it flashes blue and then I put it on the charger and it's solid blue like it's fully charged but maybe I need a new battery I don't know thank you
Hello
I purchased a brand new battery and put a brand new filter...I took the stick off and checked the inside...still pulsating
Hi! Our V7 is still pulsing with no attachment and with the filter completely removed.
I didn't know about that filter. (REAL men don't need no stinkin' instructions!!🤣)
I thought the battery was causing it, and got a new one. It was better, but it still pulsated on high speed.
I wasn't sure what the blue thing was. I thought it might have been a filter, but it didn't look dusty or dirty.
But I pulled it out and rinsed it under the tap. The wash water didn't look particularly dirty, but once I put it back in (I didn't wait for it to dry), away she went!
Pulsing cured, and MUCH quieter.
Anyway, I don't think the drying step is necessary.
Same here. I spent $35 for a new (knockoff) battery. My wife went to use it and did the same thing after 20 seconds of use. I actually took the filter apart so that I could get better flow of water through it. The water was very dirty. I'm waiting for the filter to dry. I put it on the register so I won't have to wait 24 hours.
Not wrong. My Dyson V8 is currently making that exact pulsing noise. I empty the debris container after every use. The filters are cleaned on a regular basis...
I heard there’s another filter to clean?
ok so, my filter is clean, nothing is clogging the tube, without attachments the vacuum is fine , it only does that when the roller and tube are connected, if I connect the roller without the tube is fine, if I connect the tube without the roller is fine, but both together it does not work.
Hi, Ive tried all this but the motorhead simply doesnt spin at all, could the motor have died in the head?
I don’t think the motor is dead but I think your battery is and it needs to be replaced.