Thank you, I'm sort it out my problem. viano 2008 also cruse control not working. fitted new brake switch from amazon and repair in few minut. thank you so much
hi there - I join the others in thanking you for sharing this tip. I had the same on my 2009 W639, and after changing the switch it went! on a negative note, from time to time it comes back, any ideas there? thanks again!
Have you tried pulling the plunger out on the switch? It should reset itself again after the brake pedal is pushed. Otherwise, you might have an wheel sensor faulty or slightly out of place. Have you had any work done on your brakes recently?
Cara muito obrigado graças a você consegui descobrir essa mesma peça do meu estava com o pino travado quando eu o empurrei para dentro ele se destravou se voltar a acender a luz 💡 do esp eu já sei aonde está o problema muito obrigado 👏👏👏👏👏
Thanks for the video, I bought the switch and will replace it soon.
Hope it works for you. Good luck!
Thanks for posting this! Had the same issue, purchased a new switch off Amazon, fitted today and all sorted! Thanks again
Awesome. It's good to have something simple rather than have to diagnose the whole system!
Thanks for this video, helped me diagnose and fix my van. Nice one
Glad it helped.
I've just got my esp light out thanks to your video, cheers 😎👍
Glad it helped.
Cheers for the vid mate, worked perfectly. Saved me a bit of coin there 👍
No problem Jessocalypse. Glad it worked for you.
Thank you very much, my problem is solved, much appreciated.
Glad it worked for you.
Thank you, I'm sort it out my problem. viano 2008 also cruse control not working. fitted new brake switch from amazon and repair in few minut. thank you so much
You're welcome Mariusz. Glad it helped.
Thanks, I got it done in a minute. ESP!
Awesome. Glad it worked for you.
Great info, saved me a fortune.
Also liked the comment re camera focus. ‘Focus you f$&!’ 👍🏼
Embracing my inner AVE. 😁 Glad it worked for you.
Really appreciate your advice and video.. thanks
Very welcome.
Thanks for your video. Really useful
You're welcome. Glad I could help.
Legend.
Thanks I fixed it
Thank you 😊
Happy I could help.
Someone’s watching AVE! 👍🏻💪🏻
Love that channel! 😂
thanks for the video it helped
That's great news. Happy driving!
Awesome- thank you buddy 👍
You're welcome mate.
hi there - I join the others in thanking you for sharing this tip. I had the same on my 2009 W639, and after changing the switch it went!
on a negative note, from time to time it comes back, any ideas there?
thanks again!
Have you tried pulling the plunger out on the switch? It should reset itself again after the brake pedal is pushed. Otherwise, you might have an wheel sensor faulty or slightly out of place. Have you had any work done on your brakes recently?
@@daddyjaynal no brake related work recently... will check the plunger again, but it's a new item! thx for the tips
Grazie 👍
Prego.
Cara muito obrigado graças a você consegui descobrir essa mesma peça do meu estava com o pino travado quando eu o empurrei para dentro ele se destravou se voltar a acender a luz 💡 do esp eu já sei aonde está o problema muito obrigado 👏👏👏👏👏
Você é muito bem-vindo!