Thanks you for doing the stuff that almost no one does ! ( even if it doesn’t do what you want , you still find a lot of useful information from this R&D ! And thanks to the videos - now we know as well ! ) 💪👍✌️
You guys are a bunch of mad scientists. This is why good parts aren’t cheap people. Look what goes into research and development! Cool ain’t cheap, and cheap ain’t cool! 🤑
After I saw your video, just went and ordered a 2 into 1 cobra exhaust and a T bar for my 2002 deuce softail. Have some old mid controls from a sporster left in a box. I know a shop that will make them fit. It already has a full S&S 509 cam plate installed and a Mikuni HSR42 carburetor. So the power is there. Just want to build a better handling street bike. You guys came with the inspiration I needed. Cheers from Dubai 😎
I want to WHEELIE my sporster now. My neighbors are going to hate me this spring after watching vids like this all off season here in Minnesota. Thanks Guys! SPORTSTER4LIFE
@@kruesioriginals duuuuuuude!!!!! KRUESI!!! How have I been riding this long without knowing your channel!! Love it. Thanks for the content. Much respect
Before converting to a DynaTail, can you soften the shocks like you said, grab a better seat, etc. first? Would be fun to watch you take it to the edge before throwing in the towel. As a viewer, not a stunt rider.
ive gotten my Twin Cam Deuce up to about 10 o clock before, you can definitely get them up there but they do NOT feel good when you get the front end high up 😂
I've had people ask me if I can wheelie my twin cam Fatboy that has 16 inch ape hangers and I tell them no. like you said it would be one of those holy shit moments.
A guy traded a 2005 night train soft tail in on a street glide special last year, and I decided to do a little to it before putting it out on the floor. We went through the whole motor,oil pump, rings bearings. Well we already had a 103 conversion kit in stock so we used it, and then we did the screaming eagle heavy breath air filter and power commander, swing arm, saddlemen seat, and thrashin risers and handlebars and foot pegs. I basically built it the way I would want it to be, if I was going to go out and get one. After it was done I decided to take it out for a test ride, and damn if I didn't start bringing it up more and more until finally I was going through the gears while riding on the back wheel. My salesman who is about the same age as me, started hollering you're going to hurt yourself and the bike if you keep on. I just sold it last week and damn, if I don't have one of the biggest cases of sellers remorse. Let another one come in, and I'll leave it alone. Hahaha
YOOOOOOO DO THE SWING ARM CONVERSION!! That would be fucking dope. I was wanting the conversion so bad on my m8 but ended up saying fuck it and got a dyna 😅
watch the thrashin supply TH-cam video, project 2018 Harley Davidson Low Rider with Fueling - Thrashin ,and you will see Lance Coury pull a nice wheelie on a 2018 Harley soft tail ! Thanks for all the great videos you guys put out !
@@kruesioriginals fix the brakes and I'll take it as is if we can make a deal if you wanna flip it. I'm in yuma right now from San diego. I'm cruising through your neighborhood somtime tomorrow.
Thanks you for doing the stuff that almost no one does !
( even if it doesn’t do what you want , you still find a lot of useful information from this R&D ! And thanks to the videos - now we know as well ! )
💪👍✌️
Thank you for watching, it’s how we get to do this
You guys are a bunch of mad scientists. This is why good parts aren’t cheap people. Look what goes into research and development! Cool ain’t cheap, and cheap ain’t cool! 🤑
Amen
First he said no sky net wheels. Now he said swingarm conversion. Love the Kruesi persistence!
😎
After I saw your video, just went and ordered a 2 into 1 cobra exhaust and a T bar for my 2002 deuce softail.
Have some old mid controls from a sporster left in a box. I know a shop that will make them fit.
It already has a full S&S 509 cam plate installed and a Mikuni HSR42 carburetor.
So the power is there.
Just want to build a better handling street bike.
You guys came with the inspiration I needed.
Cheers from Dubai 😎
Hell yeah, send me some pictures on the Instagram when you get the mid control set up I’d like to see it
I want to WHEELIE my sporster now. My neighbors are going to hate me this spring after watching vids like this all off season here in Minnesota. Thanks Guys! SPORTSTER4LIFE
Go check out our how to wheelie video it’s a good one
@@kruesioriginals duuuuuuude!!!!! KRUESI!!! How have I been riding this long without knowing your channel!! Love it. Thanks for the content. Much respect
Hi Minnesota neighbor!! Burnsville life here ✌️
@@brandonjones152 👊👊🤝🤝
North metro. I'm country lol
Sportsters are easy to wheelie if you put a 95lb girl on the back.. lol
Before converting to a DynaTail, can you soften the shocks like you said, grab a better seat, etc. first? Would be fun to watch you take it to the edge before throwing in the towel. As a viewer, not a stunt rider.
That bike looks incredible
ive gotten my Twin Cam Deuce up to about 10 o clock before, you can definitely get them up there but they do NOT feel good when you get the front end high up 😂
Super sick bro... Looks like a fun bike right there!!!
Love the builds, but I'm trying so hard not to hate on the stuntail 😆
Same it took me a bit to click on any videos about it 😂
Damn I was hoping to really my Softail custom..
I used to get my 06 night train to sit down wheelie up all the time... I never tried it any other way.
Video
I do it on my 05 cvo electraglide I always seem to hit the floorboards trying to drift it around in a 180
Taller suspension
I can usually get about a 1ft crossing the train tracks on my 93 fxstc but it's not easy at all
Hell yas!!!!!
My best mate Cade gets his nighttrain 110 up on the back wheel
I would think it would be doable with the chain drive!
It has a chain drive and a built motor
Chain is irrelevant
I've had people ask me if I can wheelie my twin cam Fatboy that has 16 inch ape hangers and I tell them no. like you said it would be one of those holy shit moments.
i can only imagine how absolutely terrifying that would be 😂
Can you tell me what size rims and kind of tires,what swing arm conversion you used.
Wheelie a batwing krussei !!!
A guy traded a 2005 night train soft tail in on a street glide special last year, and I decided to do a little to it before putting it out on the floor.
We went through the whole motor,oil pump, rings bearings. Well we already had a 103 conversion kit in stock so we used it, and then we did the
screaming eagle heavy breath air filter and power commander, swing arm, saddlemen seat, and thrashin risers and handlebars and foot pegs. I basically built it the way I would want it to be, if I was going to go out and get one.
After it was done I decided to take it out for a test ride, and damn if I didn't start bringing it up more and more until finally I was going through the gears while riding on the back wheel. My salesman who is about the same age as me, started hollering you're going to hurt yourself and the bike if you keep on. I just sold it last week and damn, if I don't have one of the biggest cases of sellers remorse. Let another one come in, and I'll leave it alone. Hahaha
Do you have more pics and info on this bike somewhere ? I have a soft tail I’m building similar to it
There’s lots of videos on our TH-cam
YOOOOOOO DO THE SWING ARM CONVERSION!! That would be fucking dope. I was wanting the conversion so bad on my m8 but ended up saying fuck it and got a dyna 😅
9:45 Trent's sus stare.. lmao
What size wheels are on that thing? They look dope
18/21
watch the thrashin supply TH-cam video, project 2018 Harley Davidson Low Rider with Fueling - Thrashin ,and you will see Lance Coury pull a nice wheelie on a 2018 Harley soft tail ! Thanks for all the great videos you guys put out !
They have wheelied the m8 softail, the twin cam softail is a different, heavier beast haha
I’m running a marshmallow m60-s for a rear tire and mine hooks 100% perfectly without having to let out any air. You should check them out. PEACE!
There’s guys wheeling Vrods dunno how they do it. But they are doing it in Europe?
thats been goin on for a lot of years. they come up easy balance point is bad though
If you put a swing arm on it, it's not a softail
oh shit, i ride there too
Yu should watch the boys in new Zealand throw them around
Swingarm only for the hind wheel
This video got me aggravated. Put the camera on the bike not the sweaty buff dude.
Sal from eastcoastin did it on a street bob right?
Kruesi you good to ride now? ya all healed up g
Not till January but🤷
The fact that it got off the ground is impressive to me. I didn’t think these twin cam softails could do that.
Me neither honestly, if I tried a little harder, I think I could get it up. It just doesn’t feel very good when it’s up there.
Lowrider S can do wheelies with stock gearing. Ask me how I know.
Hey bro what causes the brakes to do that on these bikes because I have the same bike and my brake does that to me the back brake
I going to rebuild the caliper and have a new master. See from there
I used to get my father's heritage deluxe up that high ,,stock,and I don't even do this shit
Swap that 100lb front tire out for a skinny and youd get it.
Call Sal (Eastcoastin),he can wheelie softails.
Not a sit down
@@kruesioriginals Hi did a sit down wheelie but it was on a new m8 softail
,15:10
th-cam.com/video/9JcgUWpgVYA/w-d-xo.html
It’s weird how guys can wheelie baggers,but not twin cam soft tails
Definitely not weird, the bagger has real suspension and good geometry, its just a full size fxr. twincam softy suspension is just trash
@@kruesioriginals that makes sense,I really appreciate your input
Shorter swinging arm
Also I saw you cheat lifting your ass off the seat.....You know if you alter the rear sprocket it would be so much easier!
Wanna sell that softail?
Maybe, not till it’s done
@@kruesioriginals fix the brakes and I'll take it as is if we can make a deal if you wanna flip it. I'm in yuma right now from San diego. I'm cruising through your neighborhood somtime tomorrow.
If it's strictly a project bike I get it. I had to try though.
@@manny1470 the bike is tore apart right now we’re doing a pretty big project on it. You can come by the shop and check it out. We can talk then.
@@manny1470 it is not. It will be for sale when it’s done, but not until I’m done with it.
Don’t waist the time & $$$ Stop hurting ur neck!! Cut canyons and drag it!!!
This bike is not performing, no power at all