Lyman Victory Reloading Press Unboxing, Setup, and Sizing 6.5 Creedmoor
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- Full Story: bit.ly/2KGcx7V
It's HERE! The Brass Smith Victory press from Lyman. In this last-of-three unboxing and setup videos covering the new Brass Smith presses, I show what's in the box, setup the press, and size some 6.5 Creedmoor brass. Be sure to check out my videos covering the Brass Smith All-American 8, and the Brass Smith Ideal.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this TH-cam channel (gavintoobe).
Any reloading data supplied on this TH-cam channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this TH-cam channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this TH-cam channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this TH-cam channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
Lyman
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...
I've never reloaded a single round but am subscribed to your channel. I'm looking forward to learning more about reloading and what all goes in to it. I appreciate the videos and quality content you put into them
Good deal- it's a great adventure (reloading) !
The best way to learn is by doing.
I'm new as well to reloading I bought a dillon XL750 and it's great.
But I really only needed a single stage press since I only reload no more than 200 rounds of .223 and .308 each reloading session. I'm thinking about getting a single stage press so I can resize/decap on before I dry tumble
Get a good reloading book and read it cover to cover you learn a lot thats what I did its such a great hobby I really enjoy fuss of it.
BTW get yourself an RCBS bullet puller with collet
Video would be more useful if you went into more detail on the assembly. Just got my press...my first Lyman, and the instruction manual is terrible. I figured out the primer feed assembly in spite of it, but an assembly video would help those new to Lyman.
Good looking gear. How about the rather rough noises coming from the ram going up and down. Is this Okay?
The packaging sucks. When mine showed up the handle had beaten the shit out of the press chipping the orange powder coat off in several places. I was pissed. Sent it back. I hope the replacement is better but Im not gonna hold my breath. Lyman should take a few notes from Dillon. Just venting. Keep the videos comin’!!🇺🇸
Looks great, wish Lyman would put a decap through the ram like the Lee Classic Cast and the ability to put the Hornady LNL bushing for die change quickly
I have a lyman tmag, its a tank and loads very accurate ammo, I stopped using my single stage because there was no discernible difference on paper or velocity statistics between the two
I have this press and the primer actuator sticks up so it does not go back inside to pick up the next primer. I have to push it down to get it back inside. Is there a way to fix it?
Molto bella, quale useresti lyman victory o redding boss? Grazie
I noticed a couple of places on the press that they didn’t powder coat. Why such a big area with no pc on the bottom? Was thinking more about rusting as opposed to cosmetics which you wouldn’t see anyway once mounted. I’d certainly consider this press when I’m in the market for another single stage though.
Which press would you recommend for a first time reloader the lyman victory or the mec marksman?
which of the 3 would you recommend, for 7mm rem mag and 28 nosler
How tall do I need the mount to clear the table completely?
I do no want to mount the press at edge of table and risk powder getting down to carpet.
You know what's up with using vacuum on gun powders.
Great video as always
hi I am very happy with Lyman stuff it's good thanks again I appreciate 👍
Does the spent primer catcher work well? Does the orange paint dirty up easy, and if so does it clean up well?
Yes, spent primer catcher works well- haven't had one miss the bucket yet! (on all three Brass Smith presses...) To be honest, I haven't dirtied up these presses yet, but the finish is powder coat- so you should be good to go.
Can it use Hornady Lock-N-Load conversion kit?
No, not with this press since it doesn't have a removable die bushing... I passed this feedback on to Lyman!
nice looking press
Looks smooth.
Hi Gavin, Which one would you recommend for rifle. 6.5 cm. I have a Dillon 550b. Thank you for the video
Perdón mi ignorancia pero esa maquina sirve para recargar 9 mm
Si puede recargar 9mm con esta maquina
Impressed with the quality of your reviews and and the products themselves but can’t help but wonder if you have any relationship with (in this case) Lyman?
Just in the interest of disclosure!
Thanks Dan, and yes, I have active working relationships with most of the big-name reloading equipment companies. You can read more about that here: ultimatereloader.com/about/
I feel the same way. Love the reviews and being able to see the products on TH-cam being used. That being said I'm here for some information and entertainment, but not for an unbiased review. I can't remember seeing a negative review on the channel in a while. And I don't mean a bashing video, but maybe a "don't buy" suggestion or a comparison letting us know which might be better and for what reason. Anyway still love the content and will continue to watch, that's just my 2 cents.
Great video thank you
Some features reminds me the Redding’s...
Man if this would take Hornady LnL bushings I would be all over it.
You keep saying the primer system should be familiar. If it was familiar why am I watching this video?
Без очистки капсульного гнезда ОООО