2014 Nissan Versa rear wheel bearing replacement

thank you for watching!!!!!
If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my TH-cam channel on your social media. Links will be on the bottom.
#nissan #mechanic #jabothemechanic
venmo.com/code?user_id=265066...
www.paypal.me/urbanautomotive

[@jayjaykingbee5566]

Thanks for you instructive video, i did one of the rear bearings on my 14 versa, it was hard because the tool set I got from autozone was not the same as yours. It had a puller in one box and a step washer set in another case. The puller was strange becasue the arms didnt quite make it across the diameter of the drum instead i believe i was supposed to pop out two studs insert the threaded arms into the holes and thread the lugs to them on the other side. I didnt want to remove the studs without having replacement ones in case they broke or became un-reusable. So i just barely caught the edge of the drum with the hex arms. If the thing had hooks like a gear puller it would have been much easier. Anyway it kept spinning and moving when i tried to turn the center screw. So without a vise i wedged the drum under another part of the car so it wouldnt move and was able to get it out. I used the other loaner sets step washers to pound the new one in place. What was a 600$ job at the local shop cost me like 80$ for the bearing and some grease. Thanks again, you Rock!!! keep on keeping on!

[@markkunes9711]

Well done for the honesty - you can learn from your own mistakes or other peoples :)

[@chuckylee8812]

FYI bearing is in the Brake Drum. It has a nut

[@bobbyhathorn8847]

Which step-washer do you use to remove the old bearing??

[@leoelledge7676]

Do I need a special bearing press for this

[@clarktransport1312]

Can’t you just buy the drum with the bearing in it?

[@gcambinga]

that axle nut has to be torque at 177 ft/lbs

[@shaneshonda]

No it doesn't more like 3ft lbs.this is the rear not the front

[@daleplueckhahn388]

Why smack the drum so much before taking off the axle nut. Also axle nut is supposed to be torqued.