Showing the updates Eagle vision has done to there magazines to make them suited for longer slugs and heavier/longer pellets . Music credits Epidemic sounds ES_Living EZ - Sven Karlsson
I’m glad I waited to purchase this magazine from Eagle Vision . Now I can get the new and improved one ! They are always on back order so patients will be my virtue . Lol
Very cool update. I find it a lil odd that only the 40gr .22 (Javelin and Zans) have been designed to be longer that 11mm but .25 and .30 cal slugs have not be lengthened past 11mm I may be wrong but I believe the NSA 55gr are the only .25 cals that are longer than 11mm
Thanks for video! I can't even afford the Impact yet. I will say when I can, I would much rather have a machined aluminum magn than a plastic mag! I would gladly pay the price and have it last maybe my life than some plastic crap, that if I drop is done. I own a couple less expensive PCP's and have already went through over 100.00 in mags! I always say, "you get what you pay for"!
Look amazing.Sadly my fx 177 eagle vison mag was Garbage the pellets would come out at an angle.I moved the spring to the lower setting I believe their are 4 small holes that can ease the spring tension.I can say their made very well and the Idea is great but on use were CRAP !!! Also the magnets are super strong little bit to strong but u need too make sure they dont come open.to some it up pellets come out wrong sideways and spring adjusting for me made no difference
My FX impact Mark II should be arriving this week. I noticed that this magazine does not have a plastic cover don't you see an issue with dirt or debris getting in there and causing issues? I looked up the stud magazine which is very good but I don't like the Aesthetics of it and then there's the ballistics Central magazine designed by Ernest row and I was told that FX has also upgraded their magazine. What's your opinion of these other magazines compared to this one that you reviewed?
Loved the original .177 mag and rated it very highly but could never remove the lid due to short nails. No issue though as I just filled it without removing the lid by keeping my finger over the hole and rotating the mag Just got the newer one and it’s so much easier to take the lid off now. Just trying to figure out the included rubber balls as the other had O rings I’m guessing looking at them one or more are fitted to the rifle in front of the magazine in the recesses on the block ? Should they be glued if they do go there or are they a friction fit ?
![[LIVE] : ONE ลุมพินี 76 | คู่เอก "ผึ้งหลวง vs สมิงดำ"](http://i.ytimg.com/vi/9SBshmGQOIM/mqdefault.jpg)
I’m glad I waited to purchase this magazine from Eagle Vision . Now I can get the new and improved one !
They are always on back order so patients will be my virtue . Lol
Yes it is a big upgrade and now suits all type of ammo aswel
every gadget and new advancement video about airguns is always cool, keep them coming.
I have the original.177 magazine. Love it. Never let’s me down. Hoping they do a mk2 version for slugs in .177
I am sure they will do if the market for 177slugs picks up
@@Airbuks quality products though.
Very cool update.
I find it a lil odd that only the 40gr .22 (Javelin and Zans) have been designed to be longer that 11mm but .25 and .30 cal slugs have not be lengthened past 11mm
I may be wrong but I believe the NSA 55gr are the only .25 cals that are longer than 11mm
Thanks for video!
I can't even afford the Impact yet. I will say when I can, I would much rather have a machined aluminum magn than a plastic mag! I would gladly pay the price and have it last maybe my life than some plastic crap, that if I drop is done. I own a couple less expensive PCP's and have already went through over 100.00 in mags! I always say, "you get what you pay for"!
Thx
Will they work in the Maverick?.As always, thanks for sharing.
They have a version for the Maverick like that aswel 👍
@@Airbuks Outstanding, I'll order x4. You're awesome 👍👍👍
@@OH8STN I am not sure these are optimized for slugs though 🤔
Look amazing.Sadly my fx 177 eagle vison mag was Garbage the pellets would come out at an angle.I moved the spring to the lower setting I believe their are 4 small holes that can ease the spring tension.I can say their made very well and the Idea is great but on use were CRAP !!! Also the magnets are super strong little bit to strong but u need too make sure they dont come open.to some it up pellets come out wrong sideways and spring adjusting for me made no difference
I’m going to have to get these in .22 caliber and .30 caliber.
My FX impact Mark II should be arriving this week. I noticed that this magazine does not have a plastic cover don't you see an issue with dirt or debris getting in there and causing issues? I looked up the stud magazine which is very good but I don't like the Aesthetics of it and then there's the ballistics Central magazine designed by Ernest row and I was told that FX has also upgraded their magazine. What's your opinion of these other magazines compared to this one that you reviewed?
A very interesting video, do you know if you can load them using the Stud mag loader? Many thanks Tim👍
🤔 not sure but I don’t think so
@@Airbuks thank you 👍
Nice magazines but the 40gr javelin slugs are still to long for it, 40gr H&N fits fine tho.
Loved the original .177 mag and rated it very highly but could never remove the lid due to short nails. No issue though as I just filled it without removing the lid by keeping my finger over the hole and rotating the mag
Just got the newer one and it’s so much easier to take the lid off now.
Just trying to figure out the included rubber balls as the other had O rings
I’m guessing looking at them one or more are fitted to the rifle in front of the magazine in the recesses on the block ?
Should they be glued if they do go there or are they a friction fit ?
👍 they should be just be friction fit . But I never add extra ones it’s more like spare parts or if you might have lost some of the original ones
Will these work with the Huma Air transfer port, it mentions on there website that it might not fit with aftermarket brass transfer ports
Olá muito bom o vídeo!!! Qual o comprimento máximo de slug que consegue usar na .30?
Ola , English 😬
@@Airbuks Hello very good video!!! What is the maximum slug length you can use on the .30?
Is there a high capacity mag for the .30 Maverick??
Hi , not from eagle vision I am afraid but there will be some guys making 3D printed once I think
So, where can I buy these?
How’s about a Link so that I can Order a couple 👌🏽🐿
Just surf to eaglevisioncam.com
My friend how come my .22&.25 has a hard time cycling I loaded it but never got to use it with pellets nothing special 🤷♂️
You mean the eagle vision magazine cycles not wel ?
@@Airbuks yes sir
@@jjssnb3790 🤔 strange, have you tried sending a mail
@@Airbuks no not yet I’ll try yah it’s strange cause I bought it for the reason of ease but thank you my friend have a wonderful day🤙
For More than 100$ price of Eaglevision magazine, no thank you ;)