How to fix gas stove burner not lighting /low flame

how to fix the gas knob burner not working
how to fix the gas nozzle that is not burning, working
In this video I made a tutorial on how to fix the gas burner that is not working
First of all open the top part of the nozzle, then you gonna need a white vinegar and clean water
Put your burner on to a small container and add some white vinegar until all of your burner is completely submerged into the vinegar
Keep in mind that white vinegar is acidic in nature there fore it will help to dissolve and to clear out some rust particles that block the gas from coming out, So leave it there for about half an hour then come back later and start to rub it and clean some rust particles at it's top
Then wash it with a plenty of clean water, by pouring the water on the gas burner from above and make sure that the water pass well through it,
Then let your gas burner to dry under the sun for some times then put your gas burner back into your stove
Lit it up and if you find that some parts of it don't burn well try to use a piece of papers and put them above your stove and let them burn above it this will help to speed up the drying process and
If you find this video helpful please don't forget to SUBSCRIBE and give it LIKE
Also if you have any questions or suggestions please leave it in the COMMENTS section

[@chiamakagloria4331]

What can I use in place of the vinegar

[@kariukikaranja-oh3di]

Asking same here

[@peacepamah5032]

Mine is not catching light completely, I even soaked it in a water over night and washed it in the morning but still, what should I do

[@rhodahenry5544]

Thank you so much it work😁🥰

[@mushitrials9808]

Thank you

[@menzimnqojana6950]

Thanks for the advice mine is working ⚒️👍

[@its_me...gia121]

Thank you

[@Det1310]

Whay is that viniga you are talking about.what is that liquid called

[@AliceMnisi]

Thank you so much for your advice

[@NAMUTEBIREHEMAH-u6u]

Thanks for the advise its working now

[@rhodamuiru6457]

Hi, burner yangu ilikatika nikifix...niitoe aje?

[@malengachepkosmeruuniversi2092]

What about leaking burner

[@Shakstyggahbeats]

Mine lights normally but after a few minutes it starts to produce a poping sound and goes of. What could be the problem on this

[@easy_english883]

Same. Did you find a solution?

[@victormokut]

Thanks bro, absolutely worked.
Mine was burning one sided, I washed, shook the water out, pricked through the holes with a needle (broke out rusted parts) and this ended my issue.

[@mushitrials9808]

Thank you

[@fodlynanyango3313]

Nice

[@peaceidu]

Wow

[@mrrobbishtv1136]

My burner is not fuming the gas out

[@highcrimeinsa4129]

I recommend buy a new burner