Introduction to Profibus DP, Siemens Remote IO and Fault Finding on a Network using Diagnostics!

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 71

  • @osutakizito2688
    @osutakizito2688 ปีที่แล้ว +2

    This is my best industrial automation mentor

  • @mechanicalman3008
    @mechanicalman3008 3 ปีที่แล้ว +1

    Brilliant intro to PBDP. Thanks 😁👍

  • @mostafaok4630
    @mostafaok4630 4 ปีที่แล้ว

    Thank you sir so mutch ..i need your free lessons they are usfull for me ..i'm from morocco ..you are reely great and i hope you are verry happy and have a good health and your familly

    • @ScantimeAutomationTraining
      @ScantimeAutomationTraining  3 ปีที่แล้ว +1

      Great! We are trying to get more videos created however it's an extremely busy time for our staff with hands-on training, but stay subscribed for future videos!

  • @pzebzda
    @pzebzda 2 ปีที่แล้ว

    Verry good lesson. Good teacher.

  • @pauldaniel100
    @pauldaniel100 3 ปีที่แล้ว +1

    Thank you Chris, very good explained

  • @lavenderflower5010
    @lavenderflower5010 2 ปีที่แล้ว

    At around minute 3:30-4:00 it looks like the dip switches for 4&2 were on.

  • @muhirwabernard5031
    @muhirwabernard5031 3 ปีที่แล้ว +1

    your lesson is so helpful

  • @cliffordwate9581
    @cliffordwate9581 4 ปีที่แล้ว +1

    Really enjoyed..keep up the great work

  • @andregrobler4393
    @andregrobler4393 2 ปีที่แล้ว

    Excellent thanks. Nice to get this practical info as well.

  • @andrewkavito6755
    @andrewkavito6755 ปีที่แล้ว

    Just subscribed and am happy to learn. thanks

  • @madjiddz6183
    @madjiddz6183 4 ปีที่แล้ว +1

    love this video. Thank you sir

  • @hooshangalizadeh637
    @hooshangalizadeh637 3 ปีที่แล้ว

    Thank you Chris . very good and very nice

  • @suleimanabiodun1676
    @suleimanabiodun1676 3 ปีที่แล้ว

    This is lovely! Thank you very much Sir.

  • @DrReginaldFinleySr
    @DrReginaldFinleySr ปีที่แล้ว

    Excellent video. Of course, baud and bps are not the same but I get your point.

  • @yogeshasutkar9079
    @yogeshasutkar9079 3 ปีที่แล้ว

    Thank you sir, explained very well

  • @usoroekwereessiet4397
    @usoroekwereessiet4397 3 ปีที่แล้ว

    Hi please do you have knowledge of Triconex DCS or a video on it?

  • @akshaypotdar1840
    @akshaypotdar1840 4 ปีที่แล้ว

    Brilliant video, thanks. Could you possibly make a video about OBs for fault finding profibus slave devices, e.g comms failure due to wiring problem or salve device itself is down or rack failure?

    • @ScantimeAutomationTraining
      @ScantimeAutomationTraining  4 ปีที่แล้ว +1

      Hi Akshay, this is actually covered on our training courses in more detail and we are currently looking at releasing a Networking online course which will also cover this!

  • @mahadihasan93
    @mahadihasan93 3 ปีที่แล้ว

    How do select the baud rate?(34.40min) On the shop floor what should be the rule of thumb?

  • @anesugladys8823
    @anesugladys8823 3 ปีที่แล้ว

    thank you , Im super grateful

  • @kenwarren5732
    @kenwarren5732 3 ปีที่แล้ว

    I'm trying to setup S7-1200 Profibus PLC to Anybus Communicator to control ESAB Aristo 1000 AC/DC Welding Machine. Have document ESAB PLC Integration guide. Purchased Siemens Starter Kit. Have Step 7 configured to TIA Portal. Not sure how to configure and send data word to energize welding machine. Not sure how GSD file works. Can you help?

    • @ScantimeAutomationTraining
      @ScantimeAutomationTraining  3 ปีที่แล้ว

      Unfortunately, that would be a bit too complex and specific to cover in a video but our Automation Dept. may be able to help if you send us an email!

  • @mdragib22
    @mdragib22 2 หลายเดือนก่อน

    excellent .

  • @karanhariyani4163
    @karanhariyani4163 3 ปีที่แล้ว

    Could you please make video on scaling in s7 simatic manager & how to transfer data plc to plc.

    • @ScantimeAutomationTraining
      @ScantimeAutomationTraining  3 ปีที่แล้ว

      We are looking to bring out a course on more advanced programming for the Siemens PLC including Scaling, we may release a teaser video for it!

  • @arshad1160
    @arshad1160 3 ปีที่แล้ว

    Very good, Thanks

  • @mohamedelrayah7634
    @mohamedelrayah7634 3 ปีที่แล้ว

    Very nice video

  • @samisrour3129
    @samisrour3129 3 ปีที่แล้ว

    Thx lot for this tutorial videos , I was very interesting with it and it is very clear ,,, can u put for s7-400 faile-safe

  • @_Iokanaan_Marusidze_
    @_Iokanaan_Marusidze_ 2 ปีที่แล้ว

    Thanks 👍

  • @owinookello9358
    @owinookello9358 4 ปีที่แล้ว

    Good work. Keep up

  • @d.militomilito2002
    @d.militomilito2002 7 หลายเดือนก่อน

    that's great! could you please make a video with TIA PORTAL please :)

  • @Ar6155-w1x
    @Ar6155-w1x 4 ปีที่แล้ว

    The dip switches at 3:56 indicate address 6

    • @ScantimeAutomationTraining
      @ScantimeAutomationTraining  3 ปีที่แล้ว +1

      It looks that way however it's the angle, the first dip switch at the bottom is to indicate whether the Slave is to use the physical switches to assign the address of if it is being programmed. The next switch up is 1 and the switch above that is 2. This makes the address 3.

    • @Ar6155-w1x
      @Ar6155-w1x 3 ปีที่แล้ว

      @@ScantimeAutomationTraining thanks. Nice video 👍

  • @asifmahiudin8063
    @asifmahiudin8063 ปีที่แล้ว

    ❤️from 🇧🇩Bangladesh

  • @jayespatra4285
    @jayespatra4285 10 หลายเดือนก่อน

    How to check the DO signal

  • @majidkhoini6037
    @majidkhoini6037 3 ปีที่แล้ว

    thanks sir

  • @abdelfetahissellal5265
    @abdelfetahissellal5265 4 ปีที่แล้ว +1

    I'm a bigenner in plcs but that awsome

  • @sheena6393
    @sheena6393 3 ปีที่แล้ว

    Could you pls remove background music .Your tutotirals are very informative.great job.

  • @sadiodiallo4706
    @sadiodiallo4706 ปีที่แล้ว

    Content interesting but I think it is better to remove the music sound , everyone can play its own music if they want

  • @jmbcrp1010
    @jmbcrp1010 6 หลายเดือนก่อน

    I will never play along with the monopoly of Allen Bradley and Siemens, whoever wants to make these companies richer welcome, I have had projects for more than twenty years working and making upgrades with PLCs from different brands, they do the same!!! More economical!! And even in some cases, better functions such as Rest API, OPC UA, it seems like a robbery to me that just by checking a box on the portal they charge you 1000 dollars just to enable OPC UA, that's it!!