Quite rightly I've been called out saying it was 30 mph wind at the tractor, clearly it's much calmer there vs the take off spot (that's higher and more exposed) sadly I can't find the comment that was left to reply direct
Only getting 3 1/2 to 4 min on a cnb 850 and 2 1/2 on a 550 tattu rline just cruising. Using the recommended tune. Cannot pull out of even a small dive without almost full throttle. Running betafpv 1102 motors and a caddx vista w/ nebula pro which is lighter than o3 just to see it fly. Doesnt feel much better than a pico. An one tumble on side walk from 15mph wind broke frame around prop. I had high hopes unfortunately
hi @squaddingquads I have decided to build my own itzy using the same components suggested by the manufacturer, I have found all the parts except for the ELRS rx, which is the one you are using on your build? the fc does not have a elrs rx included so it has to be an external one.. thanks
@@carlosfuhrer I can get 6 to 7 mins on a 720mah 2s that's the ideal lipo for this, flying either inside or in no wind. The Pavo 20 PRO is a diffrent animal, it's more designed for outside flying it'd 3s and 2.2 inch vs this that's 1.6" and 2s so it depends what you will use it for as to what I'd say buy.
@@squaddingquads thank you for the quick reply, i currently own a mob 8 o3 version and i love to flight in parking lots, parks and the office, my main problem with it is that i only get 3 mins tops so i want more flight time and also the option to do light freestyle and the ocasional small waterfall surfing considering this what would you recommend? The itsy or the pavo 20 pro? Thanks
@@squaddingquads I’m a videographer, planning to convert fpv from hobby to work. My plan long term plan is to have 1 flexible cinewhoop 50/50 outdoor and indoor, 1 4s 2 inch cinewhoop 80:20 outdoor and indoor and lastly 1 3-3.5 inch cinewhoop for outdoor only for high speed stuff. Hopefully with GPS pre-installed, if not I can just install them myself. One thing I notice is that some drones like flylens85 flies really well with decased or O3 lite. But doesn’t fly well with full O3. But the O3 lite has some weird reflection when using the ND filter. Sorry for having such a demand for just a hobby.
Buy your own itsy here, none affiliate.
dronetheory.co/collections/itsy-by-spydr-cinematics
Awesome piece of kit, the footage looks incredible! 💯
I just can't say a single bad word against it buddy
Quite rightly I've been called out saying it was 30 mph wind at the tractor, clearly it's much calmer there vs the take off spot (that's higher and more exposed) sadly I can't find the comment that was left to reply direct
I have one too, I completely agree with your review!
@@ryidgilani8987 thank you, it's genuinely my best flying quad, absolutely unreal, and got the job it's designed to do NOTHING comes close does it
Only getting 3 1/2 to 4 min on a cnb 850 and 2 1/2 on a 550 tattu rline just cruising. Using the recommended tune. Cannot pull out of even a small dive without almost full throttle. Running betafpv 1102 motors and a caddx vista w/ nebula pro which is lighter than o3 just to see it fly. Doesnt feel much better than a pico. An one tumble on side walk from 15mph wind broke frame around prop. I had high hopes unfortunately
That's really odd, have you checked the esc settings? Your solder joints? Any snagged wires?
Have you tried the Supafly for your 5”?
I’m sure you have being in the UK
@@focalpointvideo I've got a few 5 inch Quads, including the flip mini but not the 5 inch version of thiers no
Oh the preset? My 5inch with that preset fly incredibly well, but the ITSY is just next level
I do like my Pavo20.😊
@@stevehaynes2857 the 20 is great, the 20 pro is next level though
hi @squaddingquads I have decided to build my own itzy using the same components suggested by the manufacturer, I have found all the parts except for the ELRS rx, which is the one you are using on your build? the fc does not have a elrs rx included so it has to be an external one.. thanks
@@carlosfuhrer this is what I use, betafpv.com/products/superd-elrs-2-4g-diversity-receiver?sca_ref=5811057.Lzh0hLJr8w&
@@squaddingquads thank you
@@carlosfuhrer your welcome
@@carlosfuhrer How much does it cost the entire build with the recommend parts?
@@TheGuigotz around 190 usd
Whats the flight time you are getting with the 550 2s? Also is the itzy better than the pavo 20 pro you reviewed a couple of days ago?
@@carlosfuhrer I can get 6 to 7 mins on a 720mah 2s that's the ideal lipo for this, flying either inside or in no wind.
The Pavo 20 PRO is a diffrent animal, it's more designed for outside flying it'd 3s and 2.2 inch vs this that's 1.6" and 2s so it depends what you will use it for as to what I'd say buy.
@@squaddingquads thank you for the quick reply, i currently own a mob 8 o3 version and i love to flight in parking lots, parks and the office, my main problem with it is that i only get 3 mins tops so i want more flight time and also the option to do light freestyle and the ocasional small waterfall surfing considering this what would you recommend? The itsy or the pavo 20 pro? Thanks
Incredible content! Could you do a content comparing all the new cinewhoop and ranking them?
Yeah definitely I don't own them all but I can do what I do own, it'll take a couple of week though though, so just gimme a little patience please 👌
@@squaddingquads Appreciate it! Watched all your 2" cinewhoop video. Still cannot come to conclusion on which to get.
@@choyweide903 what will be your main usage for it?
@@squaddingquads I’m a videographer, planning to convert fpv from hobby to work.
My plan long term plan is to have 1 flexible cinewhoop 50/50 outdoor and indoor, 1 4s 2 inch cinewhoop 80:20 outdoor and indoor and lastly 1 3-3.5 inch cinewhoop for outdoor only for high speed stuff. Hopefully with GPS pre-installed, if not I can just install them myself.
One thing I notice is that some drones like flylens85 flies really well with decased or O3 lite. But doesn’t fly well with full O3. But the O3 lite has some weird reflection when using the ND filter.
Sorry for having such a demand for just a hobby.
@@choyweide903 first off, avoid the FlyLens, second, are you saying 80% outdoor? 20% in?
No props in view
Camera lens protected
Battery and 03 on top 😱
Tell me this isn't a perfect wish list of everything a pilot wants
I can't get mine to not fly to the moon even with their filtering i have a moonlight in mine though
@@yamasaur did you follow the tune guide on the website? What motors are you using?
@@chriskarcher9561 Yea I tried their tuning guide using betafpv 1102 14,000kv
PID toolbox FTW... Does it do it with defaults? Reduced master slider? or is it loose and wobbly until a point and then just too tight? Heat?
Did you follow the PIDS too? It's genuinely the best flying quad I own, want me to ask them if they can help?
@@squaddingquadsI actually scrapped the quad and moved the naked moonlight to another build but maybe I'll try again because of your review
Supafly preset in Betafl
Even I enjoyed the cinematics and I'm you.....
Stop talking to yourself you'll get locked up
@@squaddingquads 🤣
😂