The front wheel bearing is not in far enough. Check how loose the inner spacer is, it should be touching both inner races of the bearings. If you tighten the spindle it will ruin the bearings. You need to use a hard hammer to install the bearings. Fit a new tyre valve, the old one will leak.
Whenever you touch the exausht/intake system as in "modding" please do tune or get a tuneable ECU to make the bike live healthy and prevent any future hiccup.
I’m sure someone has said it already, but when sweating the bearings in, you have to heat up the wheel. You can use a heat gun. Freeze the bearings and heat the hole they’re going in.
Motorcycles the ones that you have put together more the Italian bike and decati a work of art to appreciate and admire watching you the restorer mechanic electric knowledge etc all on film joyful work smiles aplenty a joy to watch can only be inspired to give my best ❤on a daily basis for The faith blessings 😊.
That Yoshimura Racing Air Box will give the bike a great look and a lot more breathing power, but make sure you keep an eye on that filter element because it is not meant for street riding. You need to clean or replace the filter element more frequently, such as, after every race or track day. Enjoy and great video as always. Love the new tools.
Some channels talk through the entire video, you don't. I prefer it that way. My engineer friends always had a motto, K.I.S.S., which means Keep It Simple Stupid. That ideal seems to have been lost to many in modern times. Thanks for keeping it simple.
I haven’t seen anyone answer your question about the throttle being half open in the UK. It stems from EU regulations about how old certain people must be to ride big bikes. If you’re 18 you can only ride 125cc till you’re 20 then you can ride any bike with a power to weight ratio of 0.2Kw/Kg or 48hp. To ride an R7 from age 20-24 they then restrict the throttlebody opening.
Do these builds end up costing more than the bike value? If so, is it just a passion of yours ? Thanks and always love to see a beautiful machine returned to its former glory!
I was going to buy the Yoshimura air box for my R7 but they recommend a crazy cleaning interval of 7 hours of ride time. I dont see how you could easily clean it without removing the whole box, and that is just not something I am willing to do every other weekend. It does give the bike some good gains with a proper tune. I just wish there was an easy way to clean the filter material. If anyone knows of an easy method, please share. @CJ Great job on the bikes and your videos. I love watching your builds. Especially this one since I do have an R7. Thanks brother, keep it up!
Hi CJ, pretty cool Yoshomura air box. I wonder if you´re going to improve the exhaust also. Let us know whether it will require a new mapping due to better air flow. As per throtle slack, as far as I know it is about how fast the answer will be. Higher advanced riders muight like a quite responsive throtle and then you should work on that slack. But maybe other more expert people have another saying. Cheers mate, it´s been long!
Considering that the original axle was bent, I really would not trust those bearings. Bearings are relatively delicate, and the force needed to bend an axle wouldn't be good to them... plus bearings are a consumable item anyway, they really should have been replaced with a new set.
@@GeorgeOrlandson Dang, re-watched the video, and lord and behold, CJ is pulling out some frozen bearing out of the freezer. I am going to blame it on not drinking enough coffee that day. LOL!
Looking at the old rim, are you sure that you want to use the old bearings? They're not that expensive and looking by the crash damage I wouldn't trust those anymore. Also I allway's thought that the dot on the tire was the heaviest part that needs to sit opposite from the valve stem, but I've never changed a tire myself so what do I know. Entertaining video though, keep up the good work.
Great looking balancer but, risky reusing crashed front bearings but have to say your seal is damaged and inner seal spring not seated properly. Putting that beautiful new front wheel at risk of locking up.
The Lord forgives his flock that use a yellow hammer on seals to make them flush and using flat bladed screwdrivers on lower fork braces. Lord, hear our prayers.
Amotopart fairings! I don’t make money off of selling their products they are just that good! I have a discount code in the desc for you if you’d like!
Vote for daily vlog
>brand new front axle because it’s bent
>re-using front wheel bearings from the same hub.
C‘Mon, CJ.
Beautiful video like every time, I can't wait to see The advance of MV Agusta !!!
Thank you sir!
The front wheel bearing is not in far enough. Check how loose the inner spacer is, it should be touching both inner races of the bearings.
If you tighten the spindle it will ruin the bearings.
You need to use a hard hammer to install the bearings.
Fit a new tyre valve, the old one will leak.
Whenever you touch the exausht/intake system as in "modding" please do tune or get a tuneable ECU to make the bike live healthy and prevent any future hiccup.
I’m sure someone has said it already, but when sweating the bearings in, you have to heat up the wheel. You can use a heat gun. Freeze the bearings and heat the hole they’re going in.
Where is going mv agusta videos 😅😅😅😅😅😅😅
Bro I chake your channel daily to see r7 and finnaly you did it..😢❤
Where is MV Agusta???? ❤😅
Same question i do have for him?I think he is unabled to gather parts for the MV,its parts are so expensive and hard to collect.
@@panton7842 waiting parts 😂
Maybe
After 24 hours of work here I am checking out this exceptional work. Thank you! See you soon!
As a long time follower, it’s amazing to see how much your content improved bro. I hope I can build bike in this level some day…
CJ, this video IS Superb!! A summer gift for us!! I LOVE It!!
Handy tyre changer you have, excellent for what you do and saving you plenty of money doing it yourself
After a long time most awaited video 😮
Nice work as always bro waiting for next one
Coming soon! Thanks bro
Me from Malaysia... Really enjoyed myself with your works
❤ your content keep up the good work brother!
Huge fan here from Philippines Cj!🤙🏻
After you finish working on your Yamaha R7, I want to see you fix up your next Yamaha R1 2021.
Motorcycles the ones that you have put together more the Italian bike and decati a work of art to appreciate and admire watching you the restorer mechanic electric knowledge etc all on film joyful work smiles aplenty a joy to watch can only be inspired to give my best ❤on a daily basis for The faith blessings 😊.
That Yoshimura Racing Air Box will give the bike a great look and a lot more breathing power, but make sure you keep an eye on that filter element because it is not meant for street riding. You need to clean or replace the filter element more frequently, such as, after every race or track day. Enjoy and great video as always. Love the new tools.
Thank you, I appreciate the comment on the filter as i was curious on how often a cleaning/change would be needed. Cheers
Some channels talk through the entire video, you don't. I prefer it that way. My engineer friends always had a motto, K.I.S.S., which means Keep It Simple Stupid. That ideal seems to have been lost to many in modern times. Thanks for keeping it simple.
Well done, it's going great
Nice work ❤️from. Algéria 🇩🇿
Might want to hang on to that R7. Those make excellent track bikes. Great video as always!
Thanks mate! I will have to consider, the options are endless it’s hard to settle
Always a great day when CJ uploads 🤙 More riding videos soon?
INDONESIA 🇮🇩 selalu menonton vidio mu teman 👍👍
Use the stock axle with jack stands on a level surface and take your time. Works great. No extra tools needed
amazing work cj
Did you put used bearing to new wheel? If yes, replace it, because while removing them you could damage them. Just saying.
That wasnt a good idea or the secondhand tyre valve
Finally a new video! About time.
Agreed 😂
Looking good!!
Can’t believe you fitted the old bearings!!!! Absolute tool!
I haven’t seen anyone answer your question about the throttle being half open in the UK. It stems from EU regulations about how old certain people must be to ride big bikes. If you’re 18 you can only ride 125cc till you’re 20 then you can ride any bike with a power to weight ratio of 0.2Kw/Kg or 48hp. To ride an R7 from age 20-24 they then restrict the throttlebody opening.
Do these builds end up costing more than the bike value? If so, is it just a passion of yours ? Thanks and always love to see a beautiful machine returned to its former glory!
I was going to buy the Yoshimura air box for my R7 but they recommend a crazy cleaning interval of 7 hours of ride time. I dont see how you could easily clean it without removing the whole box, and that is just not something I am willing to do every other weekend. It does give the bike some good gains with a proper tune. I just wish there was an easy way to clean the filter material. If anyone knows of an easy method, please share.
@CJ Great job on the bikes and your videos. I love watching your builds. Especially this one since I do have an R7. Thanks brother, keep it up!
I hope you oiled the beatiful filter of the airbox🔥🔥
No he didn't, I don't wanna say he doesn't know why but...he didn't.
Hi CJ, pretty cool Yoshomura air box. I wonder if you´re going to improve the exhaust also. Let us know whether it will require a new mapping due to better air flow.
As per throtle slack, as far as I know it is about how fast the answer will be. Higher advanced riders muight like a quite responsive throtle and then you should work on that slack. But maybe other more expert people have another saying. Cheers mate, it´s been long!
i like the way you say YOSHIMURA its so sassy 😆
nice dude 💥
That new rabaconda wheels balancer was awesome...
Great job best wishes 👏
Considering that the original axle was bent, I really would not trust those bearings. Bearings are relatively delicate, and the force needed to bend an axle wouldn't be good to them... plus bearings are a consumable item anyway, they really should have been replaced with a new set.
Also, place the bearing in the freezer to shrink them down a little for an easier fit.
@@fernandomoreno1621 Have you seen the video?
Same as tire valve stem 🥲
@@GeorgeOrlandson Dang, re-watched the video, and lord and behold, CJ is pulling out some frozen bearing out of the freezer. I am going to blame it on not drinking enough coffee that day. LOL!
Welcome back cj hhh
Yes finally new update new video
😁😁
Looking at the old rim, are you sure that you want to use the old bearings? They're not that expensive and looking by the crash damage I wouldn't trust those anymore. Also I allway's thought that the dot on the tire was the heaviest part that needs to sit opposite from the valve stem, but I've never changed a tire myself so what do I know. Entertaining video though, keep up the good work.
After long wait finally new video please try to upload daily vlog love from nepal
sou muito fã seu cara e do seu canal!
My man 😊
My CJ is back 😢😢
No oil on inside of that air filter system? I'd be nervous about dust & fine particulate getting in.
Slack - Yes, Where is MV Agusta? Eagerly waiting!
So nice
Great looking balancer but, risky reusing crashed front bearings but have to say your seal is damaged and inner seal spring not seated properly. Putting that beautiful new front wheel at risk of locking up.
Great video you give me inspiration to start rebuilding bikes too hahaha, but what happen to the MV Agusta? Cheers from Portugal 🇵🇹
Yes bro next one part (44)😁
Ayooo CJ 🔥
It’s what I do for a living
Seeing the tention in the wire...Ya the accelerator cable slag is ok.
why didnt you go with the dna stage 2 kit ?
I never saw you change plugs.and lube chain
10:22 hahahahah you learn fasttt!!!
I read the comments 😭🤣🤣🤣
Why does the dot need to be near the valve?
What the color code for the steel gray on the CBR ? Hello from Sweden
A video after so so long
What adhesive did you use for the weights on balancing the wheel?
The wheel weights came with a sticky side that just attaches to the wheel 😁
@@CJMediaOfficial thanks and blessed you always
Manifico 🔥🔥❤❤❤
Hey it’s possible to buy from you that triple tree that you won’t use?
fckin love it!!
Greetings from turkey ❤🇹🇷
Greetings to you ! 🇹🇷
Toprak Razgatlioglu...did I say it right..?
Quick question.. do you know what is that humming noise on the bmw s1000rr when you turn the ignition key on ? @cj media
Yoshimura❌️
Yushimira✅️
Ahh I should have known I was saying it wrong 😅
Bro 👍
The Lord forgives his flock that use a yellow hammer on seals to make them flush and using flat bladed screwdrivers on lower fork braces. Lord, hear our prayers.
That front wheel bearing installation just made me question if this is CJ .
Hey CJ love From...🇮🇳India
Hey mate!
Very hard ❤❤❤
😢 whereabouts is the agusta
Hey ginge you can buy exactly the same wheel balancer made by a different company for under £40, hardly a bespoke design by Rabaconda 😂
Ayoooooo its here
What happened to the MV?..
Maybe he can't finish it
Some parts are late
Please bro work on your mv Agusta 🙏
old one looks better then new one air filter
Functionality > looks my friend!
FIRST ONEEEEE
GONNA WATCH IT ALLLLLLL
Wait did I saw a gsx 1000rr in your garage 🤔
@cj media i got a 24 r7 im parting if u need some parts for cheap
Hey mate whats the history with the brutale??????? 😊
Hey Paul! I got a notification from Italy they shipped me a lot of parts today! Should be arriving in a couple weeks
@@CJMediaOfficial wow that is good new i live in italiy i know how hard can be to order part with them😂
Good bless you mate you are doing great videos
Invest In a bench press to install those wheel bearings.
Excellent idea
When is the brutale vlog coming?
Daily vlog plss cj
Where do you get your fairings from ? :D
Amotopart fairings! I don’t make money off of selling their products they are just that good! I have a discount code in the desc for you if you’d like!
Where project brutale 1000rr?
Hello brother incase water goes intlo air filter box what happen ?
I will hopefully never ride it in the rain
Hello bro 🙂👍💪
Bro mv😢 ?you left us in the wilderness 😅
Gode dojob ❤
Your monetization not on??
What happened with the MV ?
❤❤
mv agusta update when?
i couldn´t do this, as i wouldn't want to sell the bikes and want to keep them all to myself