So happy so many of you are enjoying this video, I apologize for missing a few of premiere pros " Frame not analyzed" error messages. Who uses Premier Pro? Should I switch to Davinci Resolve ?
Wow Thanks! yea I hope the channel will grow fast but i still enjoy building these bikes and making the content, so it is a win win! Thanks for leaving a comment it does help the channel grow!
Hello I once repaired my R1 RN19. As far as the cost went, everything was bought original. But it's really cool what you're doing over there. Have fun, greetings Della
Whats your thoughts about the stand? I am seeing they have the classic and the power-evo. I am not sure which to get. Great video editing you didn't miss a detail man!
I love it, it has been a game changer. it is cheaper than two pitbull stands but also allows you to service your triple tree bearing and swing arm if you need to since the stand is in the middle. only small issue i have had so far is the rubber on one of the caster wheels is getting wonky and wanting to come off but other than that it has been great. The shipping straight from Germany wasn't bad either pretty fast.
Oh yea those thing are super light weight aluminum but yes I replaced all the stator cover screw and thermostat cover screws and I tighten them all by hand. I used a torque wrench to the correct 3nm and then 90° but I was breaking them even with that correct torque so I just started Torquing them by hand. But everything else was torque with a torque wrench some film some I didn’t but almost everything got Loctite as well so nothing‘s coming off that bike. lol
It the bike for 8500 has to put in about another 7500 or so and then sold it for 25 k but as you saw it was back to oem and bike of that mileage we’re going for 29 ish and at the dealer TTL was around 32
@@mendingmotos If you change your mind let me know. We have a shop North Texas and would love to "Give" you a bike for your next build. Have a BUNCH of OLD Honda CB's.
@@blacktopgarageUSA wow that would be awesome just trying not to get in trouble with the wife about not being able to walk through the garage lol but yea could you email me your shops detail at memdingmotos@gmail.com
I know it hurt my soul a little bit as well, but this bike was brand new and still under warranty and I wanted to make sure the new owner would also have that chance cause I’ve heard horror stories of exhaust, avoiding out warranties with certain sketchy dealerships, but I completely agree
So happy so many of you are enjoying this video, I apologize for missing a few of premiere pros " Frame not analyzed" error messages. Who uses Premier Pro? Should I switch to Davinci Resolve ?
u just need Video rendere that frame
@ yeah I forgot to check and I completely missed. It. Amateur mistake.
The best I've seen on TH-cam by far. Subscribed on the spot. Keep doing what you are doing and thanks for sharing with us.
Wow! Thanks, that means a lot, I'm glad you enjoyed the video! And thanks for leaving a comment it helps the channel grow!
Hello, from france, very good job.
Very nice. Congratulations. ✌️😉
Hello!!! Thanks!! and thanks for leaving a comment, Helps the channel grow.
Watched from beginning to end. Amazing work what a beautiful bike to show for your hard work. Nice job.
Thanks ! Thanks for also sticking around and watching the whole thing and leaving a comment it helps the channel grow !
@@mendingmotos Your welcome.
A single like is not at all enough for this restoration
Haha thanks! But leaving a comment does help too so thank you for that! And I’ll have more builds coming!
It's really really really unfair that you only have 2000 subscribers
Very professional work and excellent photography
Keep going my friend
Wow Thanks! yea I hope the channel will grow fast but i still enjoy building these bikes and making the content, so it is a win win! Thanks for leaving a comment it does help the channel grow!
Hello
I once repaired my R1 RN19. As far as the cost went, everything was bought original. But it's really cool what you're doing over there. Have fun, greetings Della
Yea that r1 not far off on horsepower! And thanks!
MΠΡΑΒΟ φιλε μου αριστη δουλεια τελεια παρουσιαση.
Thank you ! And thank you for leaving a comment it helps the channel grow!
Was the front wheel checked before refitting to the bike?
I took it to carbon fiber repair specialist and they showed it was just clearcoat so it was structurally sound which was good news
I bet your bank account was even more happier? 😎
@@shaunhardie6077 3999 for one wheel ... yeh it was scared too lol
Superb bro❤😮
Thanks! And thanks for leaving a comment it helps the channel grow!
Hello, nice work. What is the spray at the end which you are using for gloss efekt?
It’s from a company called armour detail supply. I sprayed their ceramic spray coating. I have a link to their products below in the description.
Dziękuję za filmik jest ekstra 😂😂pozdrawiam serdecznie z Polski ❤
Awesome! Thanks for watching
Love it all in one video ❤
Yea it’s nice to just be able to watch the whole thing lol.
Great job
Thanks and thanks for leaving a comment!
Whats your thoughts about the stand? I am seeing they have the classic and the power-evo. I am not sure which to get.
Great video editing you didn't miss a detail man!
I love it, it has been a game changer. it is cheaper than two pitbull stands but also allows you to service your triple tree bearing and swing arm if you need to since the stand is in the middle. only small issue i have had so far is the rubber on one of the caster wheels is getting wonky and wanting to come off but other than that it has been great. The shipping straight from Germany wasn't bad either pretty fast.
Where is the M emblem for sale, can you pass the link?
I have an extra set if you want them. Email me at Mendingmotos@gmail.com and I can send them your way lol
I found them on Etsy there were a couple sellers making custom emblems
Nel lavoro 10 + però con tutti i pezzi che hai do uto comprare la davi in permuta e la prendevi nuova, comunque gran lavoro bravo
Thanks !!!🙏
Je suis nul en mécanique
Moi je dis bravo c’est beau à regarder
Félicitations de France
Merci! et merci d'avoir laissé un commentaire, cela aide la chaîne à se développer.
Bmw plastics seem to be very good quality
Yea these after market fairings looked great they only had one or two broken mounting tabs.
Torque wrench? BMW screws are disposable screws and need to be replaced.
Oh yea those thing are super light weight aluminum but yes I replaced all the stator cover screw and thermostat cover screws and I tighten them all by hand. I used a torque wrench to the correct 3nm and then 90° but I was breaking them even with that correct torque so I just started Torquing them by hand. But everything else was torque with a torque wrench some film some I didn’t but almost everything got Loctite as well so nothing‘s coming off that bike. lol
Hello
How much did the whole conversion cost? The parts really cost a lot. Mfg Greetings from Della from Germany
It the bike for 8500 has to put in about another 7500 or so and then sold it for 25 k but as you saw it was back to oem and bike of that mileage we’re going for 29 ish and at the dealer TTL was around 32
If you're still in the TX area shoot me a PM I might have a sweet bike for the next build.
Sure am and yea will do. I currently have two bikes in the garage so until I get at least one out. “The patter is full”
lol
@@mendingmotos If you change your mind let me know. We have a shop North Texas and would love to "Give" you a bike for your next build. Have a BUNCH of OLD Honda CB's.
@@blacktopgarageUSA wow that would be awesome just trying not to get in trouble with the wife about not being able to walk through the garage lol but yea could you email me your shops detail at memdingmotos@gmail.com
❤❤❤❤❤
Thanks! And thanks for leaving a comment, it helps the channel grow!
It was really great until you put that big lump of a exhaust back on it.
I know it hurt my soul a little bit as well, but this bike was brand new and still under warranty and I wanted to make sure the new owner would also have that chance cause I’ve heard horror stories of exhaust, avoiding out warranties with certain sketchy dealerships, but I completely agree
Coloqueim em 2X e aproveitem
Yeah, that’s a great idea. It’s a long one, but it’s fun to go on the journey.
all that and we cant hear it run........
Go check out the ride review I did on it, even with the stock exhaust that bike sounds pretty mean
1000 kable my got
Thanks !!!
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼🏍️🏍️🏍️🏍️🏍️🏍️💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻❤️🇦🇷🇦🇷
Thanks! And thanks for leaving a comment it helps the channel grow!
não ligou a moto 👎👎👎👎
I did start the bike to make sure it ran and I even did a first ride video. Go check it out.
@@mendingmotos vou ver 👍
오도바이 엊끌어블고 다시 되살리느라 고생했다 브로
Haha idk if that translated well but thanks for the comment!