You’re welcome! I may add that I recently started to shift more and more from ESP32 to Pico, price point with wifi is still quite good, connecting to the board is pretty easy (especially compared to ESP) and you can use micro python to write the code…
Sorry but I don't get it. As per Arduino's website, the Nano 33 IOT has a max clock speed of 48MHz while the ESP32 can be adjusted between 80 to 240MHz
Good summary but you should have included clock frequency, number of cores and the voltage. You said they are all 3.3V but the Pico has an on board boost/buck regulator so it can be used from 1.8 to 5.5 volts. No criticism of your video but I think those parameters are important in any selection comparison.
the ESP8266 costs 4 Euros and the ESP32-C3 costs only 3 Euros. In many cases the C3 replaces the older ESP8266. The ESP8266 also has more restrictions on which pins must be high or low when booting. The ESP8266 can only be woken up from sleep mode by a reset. I wouldn't be surprised if the ESP8266 is discontinued soon.
Interesting opinion! I was using the 8266 in many cases, simply because the performance was sufficient and so for I had no reason to spend / waste the extra performance of the 32. Anyways since the price gap is becoming smaller I would also opt for the 32 more often, simply for the backup performance.
What I’m missing is a board with even less performance and even smaller price. Use case: one sensor, to be wireless. Any recommendations? One GPIO would be enough + wifi / BLE
@@stedunn563 that's a really good input! Actually used them before, but only to make the Arduino Uno Wifi capable :D Weill definitely try whats possible! Should I document and put a video together about the testing and what's possible?
The ADC on the ESP32 is very noisy. In practice you can'T get 12 bit resolution. The PICO has advanced I/O due to the very fast PIO-co-processors nodes, that can even generate HDMI-Output.
Just the video i was looking for to figure what to use for an upcoming project. Thanks!
You’re welcome! I may add that I recently started to shift more and more from ESP32 to Pico, price point with wifi is still quite good, connecting to the board is pretty easy (especially compared to ESP) and you can use micro python to write the code…
I bought the nano because it has a higher clock speed and a 6 axis gyro which I need in my current project. But I would always prefer the esp32 too.
Sorry but I don't get it. As per Arduino's website, the Nano 33 IOT has a max clock speed of 48MHz while the ESP32 can be adjusted between 80 to 240MHz
Good summary but you should have included clock frequency, number of cores and the voltage. You said they are all 3.3V but the Pico has an on board boost/buck regulator so it can be used from 1.8 to 5.5 volts. No criticism of your video but I think those parameters are important in any selection comparison.
the ESP8266 costs 4 Euros and the ESP32-C3 costs only 3 Euros.
In many cases the C3 replaces the older ESP8266.
The ESP8266 also has more restrictions on which pins must be high or low when booting.
The ESP8266 can only be woken up from sleep mode by a reset.
I wouldn't be surprised if the ESP8266 is discontinued soon.
Interesting opinion! I was using the 8266 in many cases, simply because the performance was sufficient and so for I had no reason to spend / waste the extra performance of the 32.
Anyways since the price gap is becoming smaller I would also opt for the 32 more often, simply for the backup performance.
What I’m missing is a board with even less performance and even smaller price. Use case: one sensor, to be wireless. Any recommendations? One GPIO would be enough + wifi / BLE
@@blueprintiotthe ESP01 HAS WIFI and twj gpio pins.. very small and very cheap.
But no Bluetooth
@@stedunn563 that's a really good input! Actually used them before, but only to make the Arduino Uno Wifi capable :D
Weill definitely try whats possible!
Should I document and put a video together about the testing and what's possible?
flashin the ESP32 and ESP8266 is not that simple as the Pico, espacially on a Mac.
The ADC on the ESP32 is very noisy. In practice you can'T get 12 bit resolution. The PICO has advanced I/O due to the very fast PIO-co-processors nodes, that can even generate HDMI-Output.
Great summary and thanks to the informative comments too!
Thank you and thanks to everyone commenting! Great to experience different perspectives from all around the world!