Thank you so much! I was stuck trying to get them to run at the same time and didn't realize I had to create a new network before adjusting the adapters.
Thanks so much!! it there any way to block external access to the metasploitable VM? I guess that since it is a VM to be exploited, many people from outside could do it...
Thanks bro this video is very helpful. I'm stuck at bridging the VMs at 16:02 when you open preferences -> network in my VM it does not have network option. Please help resolve this..
Right click on a VM (for example, Kali), select setting -> Network -> Adapter 1 Choose the type of network you want to create from the "Attached to" dropdown menu, for example, select NAT Network Repeat the steps for Metasploitable 2
This video covers VMware connecting two machines -Kali and Windows but you can use any machine you like instead of Windows in this setup th-cam.com/video/TsicYHcD4us/w-d-xo.html
Great work! I'm encountering an issue with my Metasploit 2 VM. After configuring the network adapter to bridged mode, it's assigned an IPv6 address but not an IPv4 address from the 192.168.1.0/24 range. I attempted to resolve this by browsing for solutions and found many similar issues. Most suggestions involved changing the network settings to 'host,' which did resolve the problem, but the IP address is different and not from the 192 range. I'm trying to replicate your method but haven't succeeded yet. Any solution.
sir at 10.32 as you have networks displayed, its not showing on my system. Also is it necessary to change the IP address, Cant we use 10.0.2.15 as default settings? and do we have to name both ips different for both machines? Its been extremely tiring mentally to download this vulnerable meta2 and then to link nit to kalilinux.
@@NetworkingNewbies I had a similar issue but for VirtualBox version 7.0 you click tools, then network appears as a drop down menu and you just need to click the tab for NAT Networks but everything else still applies and works as shown in the video. Thanks for all the help!
Do I need ethernet or dongle to access Metasploitable or can I do it using my personal wifi? I am getting an ip when I start metasploit but when I use it in my OS outside virtualbox i.e windows using Chrome or edge, it shows unable to connect.
hi im doing a dissertation on proferming a commercial firewall on metaspoilatable 2 using linux, do i have to have 3 machines ? 1 is kali 2 is firewall 3 metasp ?
Metasploitable is already a vulnerable machine, you can install some firewall on that machine or you can have some third machine with some firewall installed on it
Bother When I start Metasploitable in Virtual Box 2 ERRORS are Showing (1) " MP-BIOS bug: 8254 timer not connected to IO-APIC (2) Kernel panic - not syncing: IO-APIC + timer doesn't work ! Boot with apic=debug and send a report. Then try booting with the 'noapic' option Please help to solve it if you can !
Which ip address I have to add in network settings while creating a NAT network? I'm adding my local machine ip but it is showing an error like "the specified address is longer than the specified prefix" Plzz help me how to solve this problem
In virtual box you selected File-> preferences and Network but i dont get any option for Network can you help... And also im using mobile hotspot as internet for my work can it be useful
select your VM, hit Settings and go to the Network section in the VM settings window. see four adapter tabs. One virtual network adapter is enabled by default after virtual machine creation. You can tick the “Enable Network Adapter” checkbox to enable the adapter
When i ping both machines with each other's IP they are replying but when i try to establish a reverse shelll connection it gets stuck on "command shell session opened"
It would be difficult to figure out the problem but I also have video on the same topic, if you like then follow the same steps, hopefully, you will get the required reverse shell th-cam.com/video/Y4aVIEgnJkU/w-d-xo.html
If you have enabled DHCP then it should get an IP address automatically, also try to use the command sudo dhclient to request for an IP address from DHCP
Thank you so much! I was stuck trying to get them to run at the same time and didn't realize I had to create a new network before adjusting the adapters.
Great to hear! Thanks for your comment
Thanks bro, i was stuck for 4 days with this network configuration, thank you so much
Glad I could help
Thank you so much for your valuable time and info..this is the best video for the installation
So nice of you
Its really amazing. You explained every single things. Thank you for it and make other video like this.
Thank you, I will
Thank you so very much for your detailed explanation bro. It means the world to me. U ROCK!!!
Thank you very much for your encouraging comment ♥♥
Thank you sir for this wonderful tutorial. You earned a subscriber.
Awesome, thank you!
Great video. Thanks for solving my connecting issue!
Glad it helped!
You Solved my big issue I was unable to solve this for a long time after lots of try But your video solved this 👍
Thank you so much dear
Glad . thanks for your comment
Great job man 👍 was very useful, keep going
Thank you for your comment
Thank you very much for the beneficial video!
Glad it was helpful! thank you for your comment
Perfect video, thank you so much.
Glad it was helpful!
YOU ARE AMAZING BRO LIFE SAVER
So nice of you :)
Thank you my friend. your video is very helpful.
Glad to hear that - Thanks for your comments
This was very helpful 👍
Glad it was helpful!
Thank you for this great video :)
Glad you liked it!
Thanks so much!! it there any way to block external access to the metasploitable VM? I guess that since it is a VM to be exploited, many people from outside could do it...
Awesome job!!! Love it
Thank you for your comment
Thanks man!
Worked
Glad it helped
Thank You 😊
You're welcome 😊
thank you so much!!
Glad it helped!
bro which version of vm you are using, in 7.1 I am unable to set nat network..please help
Click on the VM, click settings, click Network, Select Adapter 1, Select Attached to: Select NAT
Thanks bro this video is very helpful. I'm stuck at bridging the VMs at 16:02 when you open preferences -> network in my VM it does not have network option.
Please help resolve this..
Right click on a VM (for example, Kali), select setting -> Network -> Adapter 1
Choose the type of network you want to create from the "Attached to" dropdown menu, for example, select NAT Network
Repeat the steps for Metasploitable 2
The downloads form kali-org doesnt contain the .ova file anymore.. where can I find it?
www.kali.org/get-kali/#kali-virtual-machines
Thank you bro for helping me
Happy to help
Can you please make the same video but on VMWare?
This video covers VMware connecting two machines -Kali and Windows but you can use any machine you like instead of Windows in this setup
th-cam.com/video/TsicYHcD4us/w-d-xo.html
Hello. I need some help. The VMDK file gets zipped still after extracting it. I've tried 7zip and winzip. I cannot make it to work.
I think, when you are writing VMDK it means you have already extracted it.
Great work! I'm encountering an issue with my Metasploit 2 VM. After configuring the network adapter to bridged mode, it's assigned an IPv6 address but not an IPv4 address from the 192.168.1.0/24 range. I attempted to resolve this by browsing for solutions and found many similar issues. Most suggestions involved changing the network settings to 'host,' which did resolve the problem, but the IP address is different and not from the 192 range. I'm trying to replicate your method but haven't succeeded yet. Any solution.
Have you verified the IP addresses being used by DHCP at 10:56?
sir at 10.32 as you have networks displayed, its not showing on my system. Also is it necessary to change the IP address, Cant we use 10.0.2.15 as default settings? and do we have to name both ips different for both machines? Its been extremely tiring mentally to download this vulnerable meta2 and then to link nit to kalilinux.
Maybe I am not clear about your question but at 10:32 the VirtualBox should show Network option.
IP address needs to be different on both VM
@@NetworkingNewbies I had a similar issue but for VirtualBox version 7.0 you click tools, then network appears as a drop down menu and you just need to click the tab for NAT Networks but everything else still applies and works as shown in the video. Thanks for all the help!
Thank you very much for sharing your experience. @@thomasehrola7871
GOOD JOB SIR
Thank you Sir for your encouraging comment
Thank you!
You're welcome!
in mine, its not showing network option in preferences
I think the mode should be Host-only and not NAT networking as it exposes the setup to the internet.
Bridge Networking would be the safest option.
th-cam.com/video/HAiqt0igOSQ/w-d-xo.html
Thanks uh lot bro,
Thank you too
Do I need ethernet or dongle to access Metasploitable or can I do it using my personal wifi?
I am getting an ip when I start metasploit but when I use it in my OS outside virtualbox i.e windows using Chrome or edge, it shows unable to connect.
Whatever you use but both the machines should be able to reach each other (ping) if they are not connected then the tool may not work.
@@NetworkingNewbies Thanks for the Replay Sir.
I got it now.
@@karthikr4183 Happy to know this and thanks for sharing your experience
hi im doing a dissertation on proferming a commercial firewall on metaspoilatable 2 using linux, do i have to have 3 machines ? 1 is kali 2 is firewall 3 metasp ?
Metasploitable is already a vulnerable machine, you can install some firewall on that machine or you can have some third machine with some firewall installed on it
Great, thank you.
Glad it was helpful!
thanque sir
Thank you Saik
Sir I am unable to click the button of enable network adapter
I sent you a message and hope that your problem has been solved.
Can we install Metasploitable 2 in Parallel for the M1 machine? If you could, please help me.
I am sorry, I could not get your question, what do you mean by "in parallel for the M1 machine"?
Well done bro (:
Thanks for the visit
Bother When I start Metasploitable in Virtual Box 2 ERRORS are Showing
(1) " MP-BIOS bug: 8254 timer not connected to IO-APIC
(2) Kernel panic - not syncing: IO-APIC + timer doesn't work ! Boot with apic=debug and send a report. Then try booting with the 'noapic' option
Please help to solve it if you can !
I am not so sure, sorry for that.
Thanks you sir.
So nice of you
Which ip address I have to add in network settings while creating a NAT network?
I'm adding my local machine ip but it is showing an error like "the specified address is longer than the specified prefix"
Plzz help me how to solve this problem
I don't have the exact idea but you can configure DHCP with 192.168.10.0/24 subnet, I hope it will solve the issue
@@NetworkingNewbies it accepts but when I write ifcomfig in both linux and metasploit it will not showing me the ip v4
thank you
You're welcome
In virtual box you selected File-> preferences and Network but i dont get any option for Network can you help...
And also im using mobile hotspot as internet for my work can it be useful
select your VM, hit Settings and go to the Network section in the VM settings window. see four adapter tabs. One virtual network adapter is enabled by default after virtual machine creation. You can tick the “Enable Network Adapter” checkbox to enable the adapter
Gartidao meu amigo ganhou um inscrito
:)
When i ping both machines with each other's IP they are replying but when i try to establish a reverse shelll connection it gets stuck on "command shell session opened"
It would be difficult to figure out the problem but I also have video on the same topic, if you like then follow the same steps, hopefully, you will get the required reverse shell
th-cam.com/video/Y4aVIEgnJkU/w-d-xo.html
I got "No working leases in persistent database" when i try the command "sudo dhclient" can you help me plzz?
Can you please check your DHCP settings in your VMWare
@@NetworkingNewbies it works
Thanks a lot man!!
Happy to help! thanks for your comment
Bro why both doesn't have same address? I have seen in udemy courses that both have same address
These two virtual machines are on a network and two machines on a single network (subnet) cannot have the same IP address.
@@NetworkingNewbies ok
Great video. What if my kali machine IP address doesn't update?
If you have enabled DHCP then it should get an IP address automatically, also try to use the command sudo dhclient to request for an IP address from DHCP
when im trying to ping metasploitable2 from kali linux, it shows "host unreachable" :(
i exactly did the same steps, pls help me
11:45 I hope you have both the machines on the same subnet, i.e., check their IP address if they are on the same subnet
If you don't have 7-Zip downloaded make sure you get it
Thank you for your useful suggestion.
Very impression was stuck too but now i move on .
Thanks for sharing your experience - glad it helped
yar ip address 192.168 is tarike se nahi aaraha brudge adapter pr shiftkiya tobhi
10:55
Bro it's not working still ip show 10.0.2.4
configure DHCP with 192.168.10.0/24 subnet, I hope it will solve the issue
Thank you very much for the beneficial video!
Glad it was helpful!
Thank you
You are welcome
Sir I am unable to click the button of enable network adapter
I sent you a message and hope that your problem has been solved.
Sir I am unable to click the button of enable network adapter
I sent you a message and hope that your problem has been solved.
Sir I am unable to click the button of enable network adapter
Please turn off the virtual machine first and try again