Maxview Roam Installation | Motorhome WiFi System | Maxview WiFi | Roam X Installation

Maxview Roam installation video. Also applies for all Roam X WiFi systems also.
It is possible to fit the Maxview Roam yourself if you are a competent DIYer but Maxview always recommends to use a professional installer when fitting. You can find an installer closest to you on the link below:
maxview.co.uk/find-an-installer/
WARNING: If you are going to DIY the installation then check the antenna and router are functioning correctly before sticking down the antenna as it is not intended to be removed.
It's also possible to fit the Roam without drilling a hole in the roof. You can use a raised fixing kit available on the link below:
maxview.co.uk/product/roam-br...
For any questions please contact our support department on 01553 811000 or [e-mail]
Support hours are:
Monday - Thursday 8:30am - 5:00pm
Friday 8:30am - 1:00pm
Featured installer - Auto Additions Nationwide: autoadditionsnationwide.com/
00:00 - 1:22 - Roam WiFi kit introduction
1:23 - 2:36 - Preparing for drilling
2:37 - 4:02 - Drilling the hole and placing the antenna
4:03 - 5:54 - Fitting the antenna clamp and router inside the vehicle
5:55 - 6:33 - Powering up and inserting SIM card
6:34 - 7:00 - End

[@benclark5418]

Amazing bit of kit, struggled to get WiFi in a lot of the places I go now no issues

[@martinduplessis3949]

What type of internet (wifi) speed do you get?

[@marcoantoniomoreno2055]

What happens if you have a pop top roof, is there enough cable once roof is up ?

[@jeandutruy8909]

Hello team maxview, i have the extension cables installed, the router installed and configured corectly, SIM ok and activated but I don’t have any signal from the antena in 3g/4g. The mother antena is at 500/800 meter from the vehicule. I don’t understand why. If I move, I manage to get a Little signal but not optimal. Only one or two level of intansity. My speed is 0,3mbits download and 0,4mbits upload 😢😢😢