[PLAN]18" Modified ZV28-MKII SUB BASS
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2020
- #Subscribe #Subwoofer #BASSBOSS
Loudspeaker Description Extended Low-Frequency Dual 18 Inch Subwoofer
Frequency Response (+-3 dB) 24 - 90 Hz
I used B&C Speaker 18DS115 on this subwoofer so that it would provide the maximum level of excursion to support a super low frequency bass that would shake you at a distance.
It has enough Volume to reproduce those super low frequencies you could not imagine hearing. - วิทยาศาสตร์และเทคโนโลยี
I made the port longer than the original to make it play lower and the bracing its up to you how you will make it just make sure it is near this kind of bracing.
Can you please do the plan for JBL strx 828s dual 18 cabinet for us please
Can I hv the original port size pls
Thanks for this plan
Mr FREXY you're the best congratulations!!
Gracias Amigo x el vídeo.
Exelente gabinete y un buen trabajo gracias
Good Job. 100% MrFlexy SMPS signature
Your welcome
Sos un genio!!!
Hola amigos,estoy por construir este bajo,esta espectacular!!
You have to use over the 4 box aside too feel the vibrating lows. What's the max spl per box?
Muy buen trabajo, me podrías facilitar los planos y medidas del nexo STM M28, M46 y B112 por favor
Goog job
mẫu này áp dụng cho bass có đường kính từ tính là bao nhiêu ạ. Thank
What software did you use to make this?
Hola en. Planos donde encuentro estas medidas
Você teria o projeto do BassBoss Kraken de 4 alto falantes de 21 polegadas???
spl ?
Buenas noches el bajo es exelente pero no se aprecian las medias gracias y buenas noches
Pls for 15inch pls
2nd. 🖐😎👍👌
Precio xf
STOP!, FIRST COMMENT, SHOUT OUT TO YOU
Internally this is very different than a real ZV28 and even with the "extra port length" will not sound the same or likely play as flat to 20hz. Hopefully I save some poor builders soul's some disappointment.
This might sound fine though.