If anyone complains about your nails, then they are not here to learn; and your nails are pretty. Don’t listen to the trolls. Wait until you enter your 40s, all those cares go away. It’s a very liberating decade. I appreciate you posting this video. Very helpful. Thank you 💜
Aweeesome!!👍🏽 Video Tutorial 👍🏽 But I Don’t know how Good that Glue is that you are using on that plastic cup But I saw a Video About this Same Glue in the Amazon Reviews and it showed that Glue with the Rhinestones all Dried up being Peeled Off that cup like it was a Dollar store sticker and that Review was Posted September 2021 and Hey I’m just giving you a Heads up so that you don’t waste your time Putting them Rhinestones on that cup and they wind up Peeling Off Hrs. After its Dry
love this tutorial, do you cover the hole with a piece of tape or anything before you add the UV resin ? just curious if the resin will end up falling inside the hole?
Hopefully this isn’t a stupid question but what if you put a little bit of the liquid mixture 1st and then start adding glitter, would that help prevent the sticking of the glitter? Also could you seal the outside of the tumbler where the vinyl is with uv resin? Or do you have to use epoxy?
Since I put a tad bit of glitter before adding my resin that helps with blocking the resin to touch so much of the liquid. I also cure the resin right away so it literally has only a few seconds to spread. I have not had any issues with this method. Resin is thick and with only a few seconds to spread, it can't go down the hole that much.
I love your videos! You have the sweetest voice, I absolutely love listening to you talk! and you do a wonderful job covering everything for a beginner like myself! Subscribed! Just an idea, what about a vintage style Christmas tumbler for an upcoming video? I love vintage Santa or reindeer and would look so lovely in this style with rhinestones and snow globe glitter! ❤️
I am glad to help, I try to explain everything with detail. Thats a good idea for a future tumbler. Let me brain storm a bit and see what I can come up with.
Such a gr8t tutorial! You should have way more subbies. Your voice is easy to listen to, I learned a lot. Please do consider making a video on using a Cricut machine for new users . I’d like to add decals to my tumblers. New Subbie😘
Do you seal the acrylic with anything??if so can you show how to seal?i know there’s people who seal with resin spicy or whatever,can you make a video on how to do it?
@@GlitteryCrystals I am so going to try this! I don't have an epoxy set up, so this is perfect! You did a great job! I love the glitter colors!! I also really like the way you did the glycerin/water mix. It is similar to what I want to do.
With the way I seal the bottom I have never had a leak before. If you found a leak I would sand the bottom, clean it with 91% alcohol and add another thin layer of uv resin and cure it for a few minutes.
You need to cover the hole with your fingers and tip the cup over back and forth as you add the glitter. Fine glitter will clump more than coarse or chunky. It’s happening because the center of the chucks of glitter are not touching liquid.
Hi Crystal. Theo here, from Hiipoo, a company selling quality waterslide decal paper on Amazon. We are looking for tumbler makers to test our paper. I am reaching out to see if you might be interested. We emailed you. Please have a check if you are interested.
Wows!!that’s such a cool cup!🤩🤩
I would definitely love that combination of glitter
If anyone complains about your nails, then they are not here to learn; and your nails are pretty. Don’t listen to the trolls. Wait until you enter your 40s, all those cares go away. It’s a very liberating decade.
I appreciate you posting this video. Very helpful. Thank you 💜
Beautiful
This is my first time seeing your videos, your glitter is probably the prettiest that I’ve seen.
I absolutely love that cup
Love your videos
Thank you so much for your support :)
This tumbler is beautiful. Love your videos.
Bless your heart such a fun and informative tutorial thank you 🙏
Such a beautiful cup and great tutorial!
Thank You :)
so beautiful!!! 😍😮
Aweeesome!!👍🏽 Video Tutorial 👍🏽 But I Don’t know how Good that Glue is that you are using on that plastic cup But I saw a Video About this Same Glue in the Amazon Reviews and it showed that Glue with the Rhinestones all Dried up being Peeled Off that cup like it was a Dollar store sticker and that Review was Posted September 2021 and Hey I’m just giving you a Heads up so that you don’t waste your time Putting them Rhinestones on that cup and they wind up Peeling Off Hrs. After its Dry
Well thank you cause this is also 15 bucks 😭
You can also put the tumbler in the cup with glitter turn it upside down an shake it so it goes in the hole.
Gorgeous 💜 💜
I love everything about this cup!
Turned out SO Beautiful!! Those glitters mixed together are perfection💜
Thank you 😊 yes that mix is amazing, i feel love 🥰
Beautiful!
I love this cup! I just have a question do you wash those cups just like that without sealing the stickers?
That is very beautiful!
love this tutorial, do you cover the hole with a piece of tape or anything before you add the UV resin ? just curious if the resin will end up falling inside the hole?
sorry I replayed the video a 3rd time and heard the answer to my question :)
@@lisamichel6217 No worries. I cure the resin right away so it doesn’t have enough time to go all the way to the center of the cup
It’s beautiful 🤩.
This tumbler is bomb 😍😍😍😍😍 you did an amazing job ❤️
Thank you so much 😊
Hopefully this isn’t a stupid question but what if you put a little bit of the liquid mixture 1st and then start adding glitter, would that help prevent the sticking of the glitter? Also could you seal the outside of the tumbler where the vinyl is with uv resin? Or do you have to use epoxy?
very good video, but i dont see in your list the last UV gel that you applied. can you please share where i can purchase this.
Very pretty
Thank you! 😊
What size rhinestones did you use? It's beautiful 😍
Size ss16
Wouldn't the uv resin drip inside the cup since your pouring it over the hole which I'm sure goes down in there
Since I put a tad bit of glitter before adding my resin that helps with blocking the resin to touch so much of the liquid. I also cure the resin right away so it literally has only a few seconds to spread. I have not had any issues with this method. Resin is thick and with only a few seconds to spread, it can't go down the hole that much.
I love your videos! You have the sweetest voice, I absolutely love listening to you talk! and you do a wonderful job covering everything for a beginner like myself! Subscribed!
Just an idea, what about a vintage style Christmas tumbler for an upcoming video? I love vintage Santa or reindeer and would look so lovely in this style with rhinestones and snow globe glitter! ❤️
I am glad to help, I try to explain everything with detail. Thats a good idea for a future tumbler. Let me brain storm a bit and see what I can come up with.
Such a gr8t tutorial! You should have way more subbies. Your voice is easy to listen to, I learned a lot. Please do consider making a video on using a Cricut machine for new users . I’d like to add decals to my tumblers. New Subbie😘
Thank you. I will keep your request in mind :)
Beautiful 🤩 what size rhinestones did you use?
I used SS16
Hi do you have to sand glass to before u add rhinestones?
How much glitter would you recommend to put in the cup? TIA
Do you not epoxy the whole cup just the bottom??? How do you keep the vinyl not come off please help
Do you seal the acrylic with anything??if so can you show how to seal?i know there’s people who seal with resin spicy or whatever,can you make a video on how to do it?
Where do you get the tumbler from. I love it
Thank you for the shoutout! 💋💋💋💋u always snap with watever u put ur mind to. This was another successful cup 😉
Thanks boo 💕
Do you seal the vinyl and lid with something in the end? Or does it end up being okay im just getting into this and your videos are awesome!
Gorgeous cup. Thank you so very much for the tutorial. What size were your crystals that you used?
Thank You :) I used ss16
🤩🤩🤩🤩 I love it !!!! It’s beautiful!!!!!!!!!!!!!! 💕
Thank you 💖
grazie per avere scritto la traduzione italiana♥
I love it 😻
Thanks !
Gorgeous tumbler!! I love it. What size are the rhinestones?
Thank you 💖 They are ss16
I love this tumbler!!! Do you seal your vinyl with anything after you've applied it?
Nope. I have hand washed it 5 times already and its still perfect.
@@GlitteryCrystals I am so going to try this! I don't have an epoxy set up, so this is perfect! You did a great job! I love the glitter colors!! I also really like the way you did the glycerin/water mix. It is similar to what I want to do.
Gorgeous cup! And they're called needle tip applicators 🥰
Thank you for the name 🙈 I got one of those for my next snow globe
Love it
Thanks girl 😊
What size cup did you use
what do you use to cell it
Can I use the same amount of glycerin and water mix on a regular tumbler ? Or does this only apply to Starbucks cups?
Can can use any snow globe/ double wall cup. I have purchased from amazon and Hoggs the acrylic cups and they work just fine.
Where you get the tumbler
What size rhinestones?
I'm using my phone so having trouble seeing exactly what size rhinestones. Are they ss10 or 16? Tia
They are ss16
Do you have to cure the bottom hole with light/lamp?
Yes but only if your using uv resin. If its regular epoxy then just let it sit till it cured.
How do you fix leaks after you'll already epoxy thr bottom?
With the way I seal the bottom I have never had a leak before. If you found a leak I would sand the bottom, clean it with 91% alcohol and add another thin layer of uv resin and cure it for a few minutes.
Where did you get the bottle to pour the glycerin
I got it from amazon
www.amazon.com/gp/product/B00WTHLR18/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1
What transfer paper do you use ?
This is the transfer paper I use.
www.amazon.com/gp/product/B07KPB38LK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Where do you buy the cups?
I buy them at Starbucks
Help why does my glitter stick together and is clumpy all over 😞😞
You need to cover the hole with your fingers and tip the cup over back and forth as you add the glitter. Fine glitter will clump more than coarse or chunky. It’s happening because the center of the chucks of glitter are not touching liquid.
Clump is dry glitter. As im adding my glycerine mixture I keep moving my cup up and down to have my glitters well mixed.
you don’t degas it ?
Hi Crystal. Theo here, from Hiipoo, a company selling quality waterslide decal paper on Amazon. We are looking for tumbler makers to test our paper. I am reaching out to see if you might be interested. We emailed you. Please have a check if you are interested.