Kyle that rear ended needs to adjustable to take the slack out of your chain or your motor has to be adjustable?? It’s easier to do the rearend cause the front one will be hard to keep in line ?? Oval the hole in the back and make the rear bearing assembly where u can slide it then take a lil piece of .25 steel tap it take a piece of all thread weld a nut on it and put a nut next to it to lock it down like a motorcycle rear tire??
Cool project Kyle!! I too vote for a Jack shaft. The engine won't have to be lowered so far, will give lateral adjustment of the motor with more gear ratio options. Specially with that tiny rear sprocket.
Should of used the swing arm and axle from the Quad. Build a tube frame to mount the swing arm. Run a center shaft to get the chain lined up and tube the rest of the front. Slap the body back on and call it gravy.
You can place the engine wherever you want, just use a jack-shaft. You might need to anyway, thats WAY too long a distance for a single chain. Plus if you want to minimize cutting your legs off, maybe a belt or torque converter setup. Either way its gonna be terrifying. Love it.
My fiancee-wife really likes old mercedes but I like cars that go fast and don’t break down constantly in stock form! So after watching your channel for quite awhile we’ve improvised, she’s going to let me buy a junk LS to learn how to play with motors and I told her I’d put it in an old mercedes shell somehow! Never a better time than the present to learn how to weld, huh?
Make a jig for it to keep it square also u. Will probably need a jack shaft or intermediate shaft so that the chain aint 10 foot long but they sell little mini rack n pinion for like go carts it's exactly wat ull need for steering
Hey Kyle. Glad to see your creative genius kicking in. Looks like you're having lots of fun these days. That's what it all about, man.👍 Looking forward to this wacky build and no doubt it's going to be scary fast! Hold on to your bird. Haha. See ya on the next one, homie. Get that V!✌
better lower it a lot and make sure youre about sitting on the ground behind the engine , see a few simulair builds and the high center of gravity makes the thing do backflips or flips over in turns with the big wheels you migh be able to fit the axles and stuff over the top of the frame
trillrif axegrindor trust me i tried... Block is cracked, cilinder is done and piston rod is in 10 pices, can't fix that. And geting Parts in belgium is like inposible.
Brooooo. This is sick n all, but i think what the channel really needs is for u to complete lilroy and win over some cleetus fans, then continue with these other projects. As a fellow canadian i wish i could join u thru ur journey. If you're ever in ontario, holla at me im down to help out any way i can. Keep up the good/hard work 👌✌
Kyle you need to sit down and draw out a few different ways to build something with a pen and paper to see how its going to work out I can't picture things like that either really so I will sketch out different ways to do certain things
Dude I got a rear end out of a Honda trike shock axle hubs and swing arm I’ll donate for the project. You need some ass squat to launch hard or hit shit. I can even throw in a Chinese quad for some A arms for front etc
dude gonna be sick af! Also use a go cart steering rack from go power sports, dont use the stock garbage one thats on there. Also wanna beef up those knuckles as you be doing wheelies all day with that lol
dam it, sitting here for no reason watching this. and at time stamp 6:10 your tractor has diagram for the belt, you know if my dumb tractor had that it wouldn't be sitting in front yard not moving...
Man i have a raptor 660 thats has the 727 kit and stage 2 cam on it. All rady for a turbo. Would be minty for ur project. Pm me only a few hours away. 5g into motor. Give a good deal. If that 1 doesn't work.
Kyle you know that deck up/down lever would make a perfect shifter. Just make some linkage to the trans on the motor and you're in business! 🤣
Excellent engine choice! But will it be enough for a banshee 👀👀
Hahaha I seen your mad new idea 🤣🤣 I'm gonna add a turbo 👀
Hah! What about a 410 Puma 2 stroke run on nitro? Lol
@@codycall6513 what’s the point of a 2 STROKE when you have a much more powerful engine
My favorite Canadian!! You could drink maple syrup straight from the can to aid in being visibly more Canadian ehh!! Just a thought you effin hoser
Kyle that rear ended needs to adjustable to take the slack out of your chain or your motor has to be adjustable?? It’s easier to do the rearend cause the front one will be hard to keep in line ?? Oval the hole in the back and make the rear bearing assembly where u can slide it then take a lil piece of .25 steel tap it take a piece of all thread weld a nut on it and put a nut next to it to lock it down like a motorcycle rear tire??
Just build a chassis and slap the sheet metal body on top. It's so small, it would end up being everything you wanted
Cool project Kyle!! I too vote for a Jack shaft. The engine won't have to be lowered so far, will give lateral adjustment of the motor with more gear ratio options. Specially with that tiny rear sprocket.
I love this new project! Can't wait to see it done and driving. Hurry up!!
Should of used the swing arm and axle from the Quad. Build a tube frame to mount the swing arm. Run a center shaft to get the chain lined up and tube the rest of the front. Slap the body back on and call it gravy.
Drift hand break in place of the mower deck adjustment. 👌
Used to pop sick wheelies on a 16 horse Craftsman very much like that one when I was a lil kid. This takes me back.
Turbo twin cylinder lawn tractors are my favorite vehicles haha! We're all still waiting for the lil'leroy cart though...
The only problem I had was space I ran out of space
Looking sweet!! You might need a jack shaft for zero chain problems? Maybe a hood scoop? Great vids!!
This is the first video of yours I’ve seen and that’s one hell of an intro
Kyle you the man! Love the channel and content keep up the great work! I'm here for the algorithm! Peace easy and get that v!
I can't wait till the neighbours see us cruzin the block on this sick frig
The motor dosent have to be in line with the axle you can use a jack shaft
It's funny to see a small project once in a while cause they move up pretty fast
You can place the engine wherever you want, just use a jack-shaft. You might need to anyway, thats WAY too long a distance for a single chain. Plus if you want to minimize cutting your legs off, maybe a belt or torque converter setup. Either way its gonna be terrifying. Love it.
Everyone that's been following you since the beginning is having so many flashbacks to half finished builds left to die
This one won't die 😈
When you said you said you thought we were keeping that stock and had that little chuckle reminded me of Joe dirt with the mustache LOL
I love how you called the steering wheel handle bars lol
Can’t wait for part 2 . I’ve been wanting to do this same project for some time now. Love these kinda builds.
Love the new build idea 💡 It should be a blast when done.
Puuuuuump it!
That mullet stache combo....wow. impressive my guy.
My fiancee-wife really likes old mercedes but I like cars that go fast and don’t break down constantly in stock form! So after watching your channel for quite awhile we’ve improvised, she’s going to let me buy a junk LS to learn how to play with motors and I told her I’d put it in an old mercedes shell somehow! Never a better time than the present to learn how to weld, huh?
as long as you got room,time,skill,MONEY and love the nightmare of electronics german cars are stuffed with,make it happen
9:02 made me laugh and pressed the like button 🤣🤣🤣🤣🤣🤣🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲
So much progress I respect that
So dope. I think it needs the small front wheels though
Make a jig for it to keep it square also u. Will probably need a jack shaft or intermediate shaft so that the chain aint 10 foot long but they sell little mini rack n pinion for like go carts it's exactly wat ull need for steering
You should use that lever for the deck lift as a shifter
I hope you're using the deck height adjust for a shifter
Hey Kyle. Glad to see your creative genius kicking in. Looks like you're having lots of fun these days. That's what it all about, man.👍 Looking forward to this wacky build and no doubt it's going to be scary fast! Hold on to your bird. Haha. See ya on the next one, homie. Get that V!✌
Gonna look so bad ass with those wheels
I like the way you say ay, ay
I like where it’s heading already !!
He's like Ricky from trailer Park boys but he knows his way around a garage and tools.... And I think he got his grade 10 before 30
This thing is gonna be a monster! Probably pop wheelies like crazy also.. 💯💯
Heads up with the Fastest Lawn Mower the red Honda one after its done built
Hey bud were did you get the axle from.
Just landed from IG. A sub is well deserved here
May be the coolest mower ever
I have a similar ltx1000. I wouldn't mind making it quicker and handle batter, but it still needs to cut grass.
Hell yeah buddy 🤟🏻 the old Alberta special ✊🏼
Hell yea brother definitely finish
Maybe you said and I missed it, but that engine isn’t from a 2001 is it? If so they had issues with the transmissions breaking. Just FYI.
Most Canada thing I've seen this week. Good 🦸♂️ 👍
Clicked the video ready to ask what about lil Roy?! Glad the project isn’t dead. Keep on doing this shit man. Love it.
I think you have another 8 turbo views type series again!! This will be awesome
Honestly I wish I lived closer man! I’d love to help build quick crazy shit like this with ya! Keep it up man
better lower it a lot and make sure youre about sitting on the ground behind the engine , see a few simulair builds and the high center of gravity makes the thing do backflips or flips over in turns
with the big wheels you migh be able to fit the axles and stuff over the top of the frame
i follow u on tiktok and this video just popped up on my youtbe
660 is a beast have an 04 grizzly 660 and shes a ripper for a utility fourwheeler
Fn love it there bud!!!
i cant wait to see how this turns out
8:58
Me: *asking myself all those questions*
Me 20sec later: *singing in the arms of an angel and crying because 4 inches isn't enough*
Ur gonna definitely need to extend the rear axle back to prevent serious wheelies or atleast i would it would look cool as fuck with a slight stretch
Yeah or a wheelie bar at the back
That chain comes off and it's going to saw you in half starting at the worst possible point lmao 🤣 👍
Why didn’t you cut up mini Leroy and add the bits from the mower you wanted to keep?
Ive been going to target on my mowers for a while
Ty BL!
can we make some kind of deal for the old engine? i have a toro mower with the same engine but mine bluw up...
fix the old engine,it aint hard...bonus ,you fucking learn something
trillrif axegrindor trust me i tried... Block is cracked, cilinder is done and piston rod is in 10 pices, can't fix that. And geting Parts in belgium is like inposible.
That thing is ridiculous
If your doin it right as a proud Canadian you must put a Rotax in it.
Gonna be a pretty sikk TRAPTOR
That's actually a sick name
About time! Cant wait to see more!
Dude I've wanted a hopped up mowin boy for so long lol
? Really
What about mini Leroy..?
Let me just get a little more space I'll come back to it 😈
Brooooo. This is sick n all, but i think what the channel really needs is for u to complete lilroy and win over some cleetus fans, then continue with these other projects. As a fellow canadian i wish i could join u thru ur journey. If you're ever in ontario, holla at me im down to help out any way i can. Keep up the good/hard work 👌✌
I just really don't have the room maybe this winter of I can find some storage space
Axle?? Where from?
If you rotate the engine to where the cylinders are more upright it would lower the engine drive sprocket.
new sub from ig! excited for this project🔥🔥
Oh yeah it’s F*cling Mint!
Siiiiiick build!
Aaaaaawwww shidddd, Canadian man is at it again!
Very excited for this project ^_^
Please post a upate of this build atleast 3 times a week man i wanna see this thing done so bad 😭
I can't wait for the next video
It's called aphantasia and I have the same thing!
love the videos eh bud never stop cheers b'y
Kyle you need to sit down and draw out a few different ways to build something with a pen and paper to see how its going to work out I can't picture things like that either really so I will sketch out different ways to do certain things
Dude I got a rear end out of a Honda trike shock axle hubs and swing arm I’ll donate for the project. You need some ass squat to launch hard or hit shit. I can even throw in a Chinese quad for some A arms for front etc
dude gonna be sick af! Also use a go cart steering rack from go power sports, dont use the stock garbage one thats on there. Also wanna beef up those knuckles as you be doing wheelies all day with that lol
1:14 scratches wheel lol
You dont apologize nearly enough for a Canadian 😉
Awe damn sorry
🤘 from Manitoba
dam it, sitting here for no reason watching this. and at time stamp 6:10 your tractor has diagram for the belt, you know if my dumb tractor had that it wouldn't be sitting in front yard not moving...
Go on and act like you're not using grinder. Ok 😎
That challenger ain’t a challenger if it has a tow hitch welded to the back of the car
It was for drag week
C beaux se que tu fais .
Let's see it mow. It's titled as a lawn mower.
Where's pt.2?? I looked thru your videos, and i dont sed it.
Love it eaaaaaaaaa!!!
Build the freaking four-eye already
Drownt it!
About fucking time
Dope
Julian from trailer park boys
7:10 Aphantasia? it sucks
Man i have a raptor 660 thats has the 727 kit and stage 2 cam on it. All rady for a turbo. Would be minty for ur project. Pm me only a few hours away. 5g into motor. Give a good deal. If that 1 doesn't work.
Message me on insta 👀
It's completely stock officer