How to Install flush mount vent into an existing floor
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- #howto #hardwood #vents
How to install flush Vents into existing floor? Heating registers always emphasize the completeness of the flooring. There are many different grills but best suited custom wood register vent. Hardwood mount vents is modernly, reliably and look terrific mounted on hardwood floors.
At this video I will share one of the methods how to install hardwood floor flush vents. Hope you will find it helpful.
Thank you for pay a visit on my Channel, Please Thumb Up and Subscribe.
Mind you write comments or wisecrack.
Always follow all safety guidelines when installing any flooring product, to protect yourself and others.
Tools used for this project (affiliate)::
Color Putty Company 9716 09716 Putty Blend Kit 16 Colors - amzn.to/2EHdY4L
DEWALT DCS356D1 20V XR Variable Speed Oscillating Multi-Tool Kit - amzn.to/2EMUE5W
Milwaukee 48-22-1906 Fastback Compact Flip Utility Knife - amzn.to/2ZmiaAj
DEWALT Oscillating Tool Blades Kit, 5-Piece (DWA4216) - amzn.to/2SibDVO
Ridgid R213BNE Brad Nailer, 18 Gauge - amzn.to/35RhRjp
BOSTITCH HFM-3 45-Ounce Graphite Flooring Mallet - amzn.to/34Ll7vu
Aviation Snip Set 3 Pack Cutters - Left, Right and Straight Cutting Shears - amzn.to/2sbfiKk
Awesome. I thought a multi-tool would be most practical after watching several other videos. You made it simple.
I've watched several videos on flush mount wood vent, and this is by far the most practical for me, which I will use. I have an oscillating tool which I will put to good use, if I have anywhere close to your steady hands. I will try to use a guide (like a template) to hold the tool steady. Thanks for posting this video.
I agree 100%
Nice work!
Wıll there be an issue with by-passing the tongue and groove edge on the register? Will the wood dry out and form gaps after the finish is applied? Considering this solution...
Thanks for your video. You certainly have a steady hand to cut that straight line into hardwood with an oscillating tool. It can be easy for those things to get away from you. And I appreciate all the info about the tools that you used, but what about the vent itself? Is there a certain brand that you use/recommend?
It wasnt a hardwood, it was more of a plywood with a veneer on top. Look at .33 and you can see the layers in the flooring. Much easier to cut than something solid.
You're right, This is not solid hardwood, but this is engineering hardwood. I showed the process and how it is work and there is no difference if it solid wood or engineered wood.
Hello, does it need to be solid wood or can this be done on engineered hardwood that's 1/2" thick ?
I need to connect two duct boots, one in the floor for current vent and wanting to change placement as making a window bench. What if the best way to seal the gap between the two rectangular shapes prior to attaching metal collar etc.
Clean!
what is the goo you applied after the liquid nails?
Y can use any flooring tongue and groove adhesive
It looks good, but it's not as efficient as the metal ones with the damper.
who cares? Looks great. Damper gets banged by vacuum cleaner and does nothing
Hi there, is this on the ground floor? Or a 1st floor / higher?
Sick dude
What's the name of the tool that you're using to cut?
MultiTool
Привет, я сегодня с вами общался пока вы были в дороге! Добавляюсь к вам в друзья и вы тоже добавтесь ко мане. В будущем если что то еще пообщаемся если вы будите не против! И кстати ваш канал класс. И привет из Украины!
Normally, a register has baffle control, when you switch to a flush mount, you lose the baffle control, to adjust the air flow.
vents with an air flow regulator are not always installed. in more than 15 years of working with floors, I can probably remember several times that there were vents with a regulator.
Where is the description?? I don't see it so i don't know the tools and materials :(
Do you see the words "SHOW MORE" before the comments??? Click on that and you will see all the info!
this is what impostors made