Motorcycle Sprag Clutch Failure Explanation

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ต.ค. 2024
  • This video is made for educational purpose. we may be wrong in this explanation. Thanks for watching and stay connected.

ความคิดเห็น • 41

  • @HerculesCDN
    @HerculesCDN 5 ปีที่แล้ว +6

    This gentleman is one of the most knowledgeable RE mechanics out there. Recommend anyone who owns an RE to watch his videos. Especially awesome because a lot of them are in English.

  • @nadybuoy
    @nadybuoy 2 ปีที่แล้ว +1

    Clear cut explanation bhai. Thank you from US.

  • @prasanthmoolethodi3152
    @prasanthmoolethodi3152 6 ปีที่แล้ว +4

    Detaied information thank you man. Waiting for your other great videos..

    • @MechAutoClinic
      @MechAutoClinic  6 ปีที่แล้ว

      thanks you very much for appreciation. stay tunned for more updates...thanks.

  • @Lucas-vk8fz
    @Lucas-vk8fz 3 ปีที่แล้ว +1

    Great explanation..thanks for taking the time to make this video

  • @daleevans3841
    @daleevans3841 3 ปีที่แล้ว +1

    Very informative, thank you 😊

  • @cliffrock3470
    @cliffrock3470 3 ปีที่แล้ว +1

    Beautifully explained..

  • @bh5121
    @bh5121 6 ปีที่แล้ว +1

    Thank you! Come again!

  • @hitendrasarthi798
    @hitendrasarthi798 5 ปีที่แล้ว

    Good information sir. Sir maine 2008 wali bike yahi Raigarh me banwai kal delivery karenge. Iska pura colour and design maine hi diya tha. 55 k kharch ho gaye hain. Last me self clutch ki problem aa gaya hai. Us model ka clutch mil paaega ya nahi. Self clutch dono side move kar ra and self button press karne par relay se cut ki aawaj aati hai self relay new daala hai. Can you give me any information for this problem.

  • @DavidJones-oq9jt
    @DavidJones-oq9jt 6 ปีที่แล้ว +1

    When should I check the Sprag Bearing?? Any way to determine the health from outside??

    • @MechAutoClinic
      @MechAutoClinic  6 ปีที่แล้ว

      yes there are many symptoms if the sprag goes on toss.

  • @HerculesCDN
    @HerculesCDN 6 ปีที่แล้ว

    Very informative.

  • @abhishekmohan4063
    @abhishekmohan4063 6 ปีที่แล้ว +1

    Hi, MY Royal Infield Continental GT has kick starting issue. When I kick it to start, it gets very tight, even stand up on kick, it goes down very slowly. Then again it get light and it starts within 2-3 kicks. It is happens anytime whether it is in cold or hot condition. My bikes battery is low but working for lights. Right now bike cannot be started by self. What can be the issue, either Sprag clutch Or Auto De-compressor??

    • @MechAutoClinic
      @MechAutoClinic  6 ปีที่แล้ว

      check your auto decomp. may be it is not engaging. tight kick symptom relates to Auto D-comp unit. thanks.

    • @abhishekmohan4063
      @abhishekmohan4063 6 ปีที่แล้ว

      Is there any relation of sprag clutch with my issue?
      Because Royal enfield mechanic is saying that this is the only issue of sprag clutch.

    • @MechAutoClinic
      @MechAutoClinic  6 ปีที่แล้ว +1

      if you have very hard kick like as though unable to kick or very high resistance then your sprag is locked up. but if you are able to with little but yes with efforts then auto decomp. to know this better to remove sparkplug and kick the bike if you still feel very high resistance in kicking then yes your sprag is locked. but if u can kick it easily then auto decomp has issue.

    • @bharatvlogs8572
      @bharatvlogs8572 6 ปีที่แล้ว

      Bhai I am facing the same issue in my Bullet500... battery is only down for self stater lights and horns r working though..kick has become harder than before still it starts but now it takes 4-5 kicks at least and it also produces weird metallic sound whenever it kicks back..Chinmay Sir any help? Also pls explain about auto decompressor is necessary or not ? What will be the consequenses ?

    • @MechAutoClinic
      @MechAutoClinic  6 ปีที่แล้ว

      STARTER needs almost full current from the battery due to 500 has high torque self start motor. but apart from that other things like bulbs and all need very less amps. In the battery there are two things which are important. Voltage and Amps/hr. So here in your case don't concentrate on Voltage. Please check the battery under load tester. you will get an idea immediately. if you don't have that unit then swap the battery with another. If self works fine just like before then please check the battery as well as battery charging circuit. Thanks.

  • @kailashneptra5108
    @kailashneptra5108 5 ปีที่แล้ว

    Why there is lot problem in self starter in bullet bike than other bike like pulsar ..hero ..honda .tvs..?

    • @MechAutoClinic
      @MechAutoClinic  5 ปีที่แล้ว +1

      Reason is shocking but I will record and upload...so all of you will get it..

  • @gaara652
    @gaara652 5 ปีที่แล้ว

    Sir electra 5speed 2008 sprag clutch and oneway change full video pliz

  • @anupbla5896
    @anupbla5896 5 ปีที่แล้ว

    When I kick start the bike a pataka sound came from silencer and carb got dislocated And kicker Was hard.! Will it be a Faulty sprag? Pls help me

    • @itskiller8012
      @itskiller8012 7 หลายเดือนก่อน

      You here? I can explain

  • @gauravvaidya_vlog
    @gauravvaidya_vlog 6 ปีที่แล้ว

    Sir can you please tell me, what is approx cost of One way clutch?

    • @MechAutoClinic
      @MechAutoClinic  6 ปีที่แล้ว

      sorry bro. not in touch with spare parts anymore.you can contact one of the spare dealer. I used to buy from Mr.Rane-8007815854. Thanks.

    • @akashpatil5386
      @akashpatil5386 6 ปีที่แล้ว

      gaurav vaidya it costs 2100 only the bearing.The whole set cost 4700 plus GST 28%

  • @aakashas3
    @aakashas3 6 ปีที่แล้ว

    I Have Thunderbird 350 . While Riding In Traffic In Slow Speeds . I Can Her Gear Change Like Or Gear Slip Like Noise And Bike Gives A Small Jerk When I Release The Clutch.
    I Release The Clutch I Feel A Jerk And Gear Change Like Noise. This Happens 80% Of Time
    The Noise And The Jerk Is Not A Please Feeling And It Does Not Give The Feeling Of Smooth Ride. It Feels Like I Have Not Depressed The Gear Peddle Enough To Put The Bike In First Gear.
    I Have Tried All Sorts Of Things But Not Able To Figure Out The Problem.
    Any One Facing Similar Problem Or Know The Solution For This(Apart From Setting The Clutch And Adjusting The Ideling RPM).

    • @MechAutoClinic
      @MechAutoClinic  6 ปีที่แล้ว

      check the rear drum rubber first thanks.

    • @aakashas3
      @aakashas3 6 ปีที่แล้ว

      Sprocket rubber . yes that's changed to new. Could it be due to sprag clutch

    • @MechAutoClinic
      @MechAutoClinic  6 ปีที่แล้ว

      nope. this could be due to rubber or loose chain or clutch issue ...

    • @aakashas3
      @aakashas3 6 ปีที่แล้ว

      No one is able to identity the issue. Could you help me ? Where is your shop in Bangalore.

  • @reymanpelaez43
    @reymanpelaez43 6 ปีที่แล้ว

    all i heard is bearing,non scense! i cant understand.BEARING BEARING BEARING😂😂

    • @MechAutoClinic
      @MechAutoClinic  6 ปีที่แล้ว

      this is basic you may feel non sense. but you have to understand this first. Then will show you whats the remedy. thanks for watching.

  • @lexxxus21
    @lexxxus21 4 ปีที่แล้ว +1

    Just buy a japanese mc you will never have problems again