I really need your guys help this is one of the best video's that has been helpful to me , but now I can't remember where the 5 cable cords go on my Enjoy color L805 dtf printer I was cleaning the print head and the cable came off and the end of it messed up so I had to order another one and now I can't find any help or video's please help if you can????
If the print head is bad will it cause the power button on the front not to come on? I cleaned the printhead and put it back together. It came on briefly, then had red bing lights then nothing after i turned it off and back on
Hey Kim and Garrett , I truly understand what you guys went through, I got the same machine and have talked to the engineer in china , I also had to change out the motherboard, cables and 3 printer heads , what would like to know the old print head, can they be unclogged, bc $360 is a freaking a lot of money. To keep replacing, that white ink is no joke
do ya work on the dtf machines dp yall have a shop , i got mine working but now the white ink sensor fails to reconigze ink. can you help me , which cable can i replace to get the ink to work?
Hello! Love this video! I was able to follow all the directions except for one… 😏 I accidentally pulled out the other cable the Carriage cable… how do I reconnect it? Please do a video Thanks! 😊
I had to figure it out on my own.. everywhere I asked they wanted to charge me.. I had to remove the carriage bar.. and underneath the carriage was the where I had to connect the cable.
Hey guys, I have looked and searched and I cannot figure out the controls on the right hand side of the printer it has numbers, but is there a certain set certain settings that I need to make the shaker work properly
What would be different reasons to replace the ribbon besides this reason? I have something wrong with my printer and one of the only things I didn't try yet was to replace my cables. It prints, but not correctly. The hue and colors are insanely off. Is the customer service place you called American based and would they help someone that didn't buy their printer from them? Id be willing to pay.
My printer stopped working after print head change and small nozzle check , I found that cable connection is old and busted but printer lost power and now I can hear tiny beeping sound , I checked back plate for fuse and it’s fine but still hearing this sound and not sure what to do next , can you guys help me work it out
@@KimandGarrettmakeit wow thank you for your prompt reply! Awesome! It’s because I was cleaning mine as well only I did have the power OFF. But I believe I did get the cables wet and it suddenly shut off and no it won’t power on at all 🥹🥹
I would suck out a bit of that air on those lines first before doing any head cleaning to prevent damaging the new head with those gaps of air running through the printhead
I have this exact printer. I had it for a year now, and all of a sudden, it prints only yellow ink. I've tried everything I can think of, but nothing works. I can't seem to find a contact number for punehod. Can you help me?
Check the belts and try turning it on and when you hear the head release, unplug it. Then move the head to the middle, plug it in and turn it on. This worked for our sublimation printer that had this issue.
So I know this is an old video BUT I AM PRAYING SOMEONE CAN HELP🙏🏼🙏🏼🙏🏼 I have had 2 epson L1800 from Taiwan and loved them but fried the motherboard. I bought this punehod like the one in this video from a girl offline and when I went to replace the printhead my new Epson L1800 printhead the printhead cable is too big to fit in the cable that came with the printer? How can a L1800 printhead have a different size cable opening on the printhead than my other L1800? Where do I buy the printhead for the Punehod printer? No one ever shows the cable openings in their pics for the printheads and I don't want to buy another one and get the same one.....
Contact Punehod! They will send you the link to the right cable. I think it's this one. This was the one in our Amazon orders. www.amazon.com/gp/product/B07DPL4FN3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Have you guys ever had issues with your white ink being tooooo thick? Clogging the printhead print after print despite daily maintenance and regular cleaning?
I was flushing my print head and didn't turn off printer as well. I also took out the print head and then reinstalled it. The red light is staying solid. Does that mean I fried it? Thanks
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Woo how did y’all remember how to put it back together. 😂 I would have been struggling trying to put it back together. Great job
Lol it wasn't too bad!
I have the same mackine.. i need to replace my printhead too.. thanks for posting
Thanks for watching! ~garrett
Wow! I loved your entrance. Lots of steps. I don't have that machine, but was impressed with your knowledge.
Thanks so much!
Just here to be envious of the DTF printer.... and to say I love the waving arms. Not as much as the tiny hands.... Also here for Kim's cute hair!
Thanks, Helen!!! The tiny hands will be making a comeback! Kim says "Thank you!" On the hair comment.
I Flippin love you guys! I saw the thumbnail and laughed! Too cute!
Thanks!
thank you so much for showing us how to do this
I love every single of your videos
I really need your guys help this is one of the best video's that has been helpful to me , but now I can't remember where the 5 cable cords go on my Enjoy color L805 dtf printer I was cleaning the print head and the cable came off and the end of it messed up so I had to order another one and now I can't find any help or video's please help if you can????
If the print head is bad will it cause the power button on the front not to come on? I cleaned the printhead and put it back together. It came on briefly, then had red bing lights then nothing after i turned it off and back on
😮Thanks for sharing y'all!
Hey Kim and Garrett , I truly understand what you guys went through, I got the same machine and have talked to the engineer in china , I also had to change out the motherboard, cables and 3 printer heads , what would like to know the old print head, can they be unclogged, bc $360 is a freaking a lot of money. To keep replacing, that white ink is no joke
Oh I have trouble resetting
my ink waste thingy , my white usb has and error do you know how I can fix this
That's great. I have mine it is just stopping printing after a few steps
Where did you get the cable? Do you have an Amazon link for the cable?
Oh my lord you have saved me.
What settings do I use on the front panel 0:09
Great video! Did it work afterwards?
do ya work on the dtf machines dp yall have a shop
, i got mine working but now the white ink sensor fails to reconigze ink. can you help me , which cable can i replace to get the ink to work?
Can u help me replace the ink station a tube from the ink pad come out and don’t know how to repair
Hello! Love this video! I was able to follow all the directions except for one… 😏 I accidentally pulled out the other cable the Carriage cable… how do I reconnect it? Please do a video Thanks! 😊
did you find a video im looking myself
I had to figure it out on my own.. everywhere I asked they wanted to charge me.. I had to remove the carriage bar.. and underneath the carriage was the where I had to connect the cable.
Hey guys, I have looked and searched and I cannot figure out the controls on the right hand side of the printer it has numbers, but is there a certain set certain settings that I need to make the shaker work properly
How could I replace a printhead for the 1390 Stylus photo dtf printer from procolored?
Did your print head come with a replacement ribbon? I can't tell if the one linked does or not.
Where do we get wires from?
Did you have to test voltage?
What would be different reasons to replace the ribbon besides this reason? I have something wrong with my printer and one of the only things I didn't try yet was to replace my cables. It prints, but not correctly. The hue and colors are insanely off. Is the customer service place you called American based and would they help someone that didn't buy their printer from them? Id be willing to pay.
You guys are hilarious! 😂
My printer stopped working after print head change and small nozzle check , I found that cable connection is old and busted but printer lost power and now I can hear tiny beeping sound , I checked back plate for fuse and it’s fine but still hearing this sound and not sure what to do next , can you guys help me work it out
Main board and possibly printer cable
Did u get it fix because my printer lost power as well after print head change
I tried this instill got flashings lights I reset it still the same what can I do can you help me please
I did not know this was a known issue. I am going through this now. Such a headache. 😢after this you are an officially and printer setup person lol
I wasn’t able to find the ribbon cables in your link, could you possibly send it?
How do I fix a solid red ink light ?
The other white cable came out is there a way to fix that
When you burned the cables did the printer still turn on?
Yes and it would act like it was printing, but nothing would print.
@@KimandGarrettmakeit wow thank you for your prompt reply! Awesome! It’s because I was cleaning mine as well only I did have the power OFF. But I believe I did get the cables wet and it suddenly shut off and no it won’t power on at all 🥹🥹
Did you figure anything out yet? I did the same thing , changed printhead and cables still no power
I would suck out a bit of that air on those lines first before doing any head cleaning to prevent damaging the new head with those gaps of air running through the printhead
What do you do when the one plugged into the actual print slider part comes unhooked and you cannot find where it plugs back in!?
How long was shipping from China?
Hi, we're did you get those cables from.
Amazon!
what do you do if the print head slams side to side
how much is the l1800 replacement printhead?
Between 150 to 250 dollars depending if you buy it from china or a Local Supplier
Have you found any dependable local suppliers?
@@SoyDavidYT
I have this exact printer. I had it for a year now, and all of a sudden, it prints only yellow ink. I've tried everything I can think of, but nothing works. I can't seem to find a contact number for punehod. Can you help me?
My print head not move when turn on, any suggestion?
Check the belts and try turning it on and when you hear the head release, unplug it. Then move the head to the middle, plug it in and turn it on. This worked for our sublimation printer that had this issue.
Cute
Thanks!
(DTF Printer r300 L1800) power button, ink drop, paper feed all buttons lights are flashing and head does not move,,
So I know this is an old video BUT I AM PRAYING SOMEONE CAN HELP🙏🏼🙏🏼🙏🏼 I have had 2 epson L1800 from Taiwan and loved them but fried the motherboard. I bought this punehod like the one in this video from a girl offline and when I went to replace the printhead my new Epson L1800 printhead the printhead cable is too big to fit in the cable that came with the printer? How can a L1800 printhead have a different size cable opening on the printhead than my other L1800? Where do I buy the printhead for the Punehod printer? No one ever shows the cable openings in their pics for the printheads and I don't want to buy another one and get the same one.....
Contact Punehod! They will send you the link to the right cable. I think it's this one. This was the one in our Amazon orders. www.amazon.com/gp/product/B07DPL4FN3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Hi Stephanie!!!!
How to fix white damper will suck in white ink . No pressure
I had the same issue. I replace the dampers, it was like $15 and then 15 minutes.
❤❤❤
Have no power light after cleaning HELP!!!!
I think you just pulled a KIM! Is there a red light on, on the motherboard in the back left?
@@KimandGarrettmakeitmine did the same I got the red light on the left corner too help
Thanks!
Thank you~~
The other white cable came out. Now what
Did you ever find a solution to this?
I have the same problem now, any advise?
Have you guys ever had issues with your white ink being tooooo thick? Clogging the printhead print after print despite daily maintenance and regular cleaning?
DSV l1800 printer dtf
I was flushing my print head and didn't turn off printer as well. I also took out the print head and then reinstalled it. The red light is staying solid. Does that mean I fried it? Thanks
Is there by any chance a video when you accidentally remove the actual carriage ribbon 🤦♀️
Thanks!
You bet! Thank You SO MUCH!!!!! ~garrett