100W Bidirectional QCPD Power Bank module IP2368 - Overview and Working

Purchase Link of the Product:
punoscho.in/product/ip2368-bi...
IP2368 based Bidirectional 100W PD/QC/AFC Fast Charging Module board - Type C Boost
This is a IP2368 Based USB PD Bidirectional Fast charging module board with 100 Watt Capabilities. It uses single USB C to acts as both source and sink operations. Supports wide variety of voltages.
Specifications -
Bidirectional PD sink and Source
Supports Fast charging protocols
Stable and all supported code are already encoded
Built in protection features
95% Average Efficiency
Supports wide range of charging voltages - 9V, 12V, 15V, 20V upto 100W
Good quality FRC4 PCB Board.
This module can be used to charge you QC/PD Laptop / Mobile Phone / GO pro and other important gadgets that needs to be charged faster.

[@justthinkingthoughts]

Next time please use an simple cheap inline usb monitor and show a few examples on which configs you tested and what the monitor shows.

[@Zorema_Hnamte]

👍

[@theraghavs]

Isn't it's advisable to use a BMS as well along with this. This one will give common voltage to all cells.
Also, does it output the voltage as negotiating with power consuming device and can be used for both smartphone and laptop?

[@Chavdaislive]

It can support 3s 12.6v battery pack?

[@troyguererro0898]

Do you need charger that has PPS?

[@sroesner]

What are those L1/L2 pads for?

[@chaitanyakrishna6506]

I want make a 4s 50000 mah power bank with this module is possible

[@ARouser15]

can this device negotiate 20.5V and 5S configurations?

[@punoscho2022]

We have not tested it in that configuration.

[@akshayphadtare4334]

sir i brought 120w module from you, i connected 16 v li ion battery pack ,but when i connected the module to my iqoo 11 phone that comes with 120w fast charging charging, after connecting module it will not charge my phone with 120w output,please sir guide me ..thank you.

[@punoscho2022]

The wattage is asked by the phone's processor. it depends on many thing like phone / battery charge, temperature, usage a that time etc.

[@AnkitKumar-tt5hs]

The clean and clear answer is smartphone brands use their proprietary charging protocols like oppo,realme and OnePlus uses supervooc charging, Vivo and iqoo use flashcharge etc. these protocols are only to be used by their branded chargers and devices. This module uses pd and qualcomm charging protocol. While this can able to charge any usb c powered laptop or macbook or any apple device. Still it lack some protocols mentioned before.

[@ArifulIslam-tm2qi]

I have a question about this module
About the battery capacity is it (lithium ion)
4.2 full -5000mAH
4.2-10000mAH
4.2-15000mAH
4.2-20000mAH
4.2-25000mAH
OR
4.2×4=16.8 volt (4s battery pack)
16.8-10000mAH
16.8-15000mAH
16.8-20000mAH
16.8-25000mAH
I am talking about default configuration
If you kindly answer this question it will be great helpful for me and others

[@punoscho2022]

This is is a single cell voltage. Thus 4S will be 16.8V

[@punoscho2022]

You are right