Nice one dude! I actually did this on my S3 a few weeks back, and fitted a flat bottom multi function wheel at the same time. Its probably worth pointing out that you need to make sure you have the correct revision steering control module to support both cruise control & the MFSW. I had to purchase and install one with part code 8P0953549F at the same time I did my retrofit. Also, only 06 onwards cars have the cruise control cable fitted as standard (even if the stalk isn't fitted), so pre 06 cars you need to purchase and run the wire too :)
@@liamali8034 Yes,just done mine. You won't need control module for all face-lift A3s.. cars that have DIS (driver info system) will work .all you need is the cruise control stick and coding. Don't forget about the steering wheel lower trim cover for cruise control
Nice vid. About to o this to mine. Just need to get a lower cowling. Got the stalk and tools. Was nice to watch someone do it all the way through. Have read through a few descriptions and it sounded within my capabilities but seeing it being done was really useful. Hoping to get mine done next week.
+Jason Wilkins honestly mate I think you will be fine, I had never done anything like this before and managed to do it first time so you should be sweet! Let me know how it goes and make sure to check out the other A3 videos!
Are you sure that is only required the tempomat module without coding? It seems you did not coded afterwards but it works still? Many videos saying that you have go code it..
Well despite the weather and the dogging-spec steamy windows that turned out ok in the end. I take it the GoPro yielded no useful footage (or did you forget to check it 😂). Pretty sure that's the code for auto locking though. Thought Cruise-Control was: ⏹⏹▶️⏺⏺🔼◀️🔽🔽
+Ed Chambers unfortunately me and my limited knowledge of go pros ended up in a time lapse of 4500 photos that my computer didnt have the power to stitch together 😂
I have a similar Audi the back lights are different also on a 59 plate ghost lights I only have the red light on the side nothing under the door other than a plastic cover can I get puddle lights for my A3 sports line no body will give a straight answer yes or no or light convertions
I’m wanting to fit a cruise control to my 2001 mk3.5 golf cabriolet 2.0 litre. I got the cruise control bits off a breaker car but it was manual and mine is automatic. Looks like it’s going to be a difficult job. Any tips to give me? 😁
Hi Mati I have just watched your video on "Cruise Control" and I have some questions ; 1) My steering wheel does NOT have the extra buttons as seen on your steering wheel, am I OK to go ahead and fit ? 2) I do not have a computer game BUT I have a MAXIECU reader, can I do the coding from there ? 3) How do I know that the steering wheel is correctly lined up, are there any Audi marks for reference ? Tony
As far as I know mate you need the multifunction wheel, cant help you with the coding Im afraid as I did mine on VCDS at a garage so thats the only way I can confirm works. As for the steering wheel just make sure you put steering lock on before you start and try put it back the same as you take it off 😂 you will know when you drive it if you need to move it a spline
Hi there Mati I have been considering undertaking this on my 8P1 ( 2009 ) 3 door hatchback but I have been put off by the connection to the accelerator and brake connection. While watching the video I see that you did not touch either of these so am I correct in thinking that this can be achieved with the use of my MAXIECU OBD 🤔 🤔 🤔 🤔 One last thing can you please tell me the Audi Part Number of your "engine cover" because all the ones I am seeing have the oil filler hole on the right hand side 😊😊😊😊
Hi, I have Audi A3 2009 plate I really want to fit cruise control in my Audi. Can you please explain where can I get this kit and where I can get it coded from. I would really appreciate that.
Do you know if its possible to drive the car again before coding? I've read somewhere you need to clear some fault code or something... I'm gonna do the retrofit but I'm relying on a friend for coding so hoping I can do it at home and then drive round his.
Nice one dude! I actually did this on my S3 a few weeks back, and fitted a flat bottom multi function wheel at the same time. Its probably worth pointing out that you need to make sure you have the correct revision steering control module to support both cruise control & the MFSW. I had to purchase and install one with part code 8P0953549F at the same time I did my retrofit. Also, only 06 onwards cars have the cruise control cable fitted as standard (even if the stalk isn't fitted), so pre 06 cars you need to purchase and run the wire too :)
Cheers mate, will pin this comment just incase anyone is wondering about different years etc! To be honest I just risked it and it worked 😂
cheers for pinning this I'm going to try it on my 07 se.
So... which module doesn't support cruise control and mfsw ?
I have a 2012 model so all i need is the stalks and to code it in correct?
@@liamali8034 Yes,just done mine. You won't need control module for all face-lift A3s.. cars that have DIS (driver info system) will work .all you need is the cruise control stick and coding. Don't forget about the steering wheel lower trim cover for cruise control
Thanks! I didn’t realize it was so simple. I was disappointed my new car didn’t have it but will fit it now
ur videos made me to love my 8p even more
I enjoyed too much to your humor, I became here to watch montage video but I pretty laughed cheers mate
At 12m03 one clip at the front, that was tough. I needed a long 2mm Allen.
Thank you so much Mati: I needed to change the wipers control and thanks to you video it all went smoothly 😉🤗
Nice vid. About to o this to mine. Just need to get a lower cowling. Got the stalk and tools. Was nice to watch someone do it all the way through. Have read through a few descriptions and it sounded within my capabilities but seeing it being done was really useful. Hoping to get mine done next week.
+Jason Wilkins honestly mate I think you will be fine, I had never done anything like this before and managed to do it first time so you should be sweet! Let me know how it goes and make sure to check out the other A3 videos!
Are you sure that is only required the tempomat module without coding? It seems you did not coded afterwards but it works still? Many videos saying that you have go code it..
Mate I’m loving the vids.. got an 8p
Now
I’m struggling to find a flat bottom steering with DSG paddles
Any suggestions?
Well despite the weather and the dogging-spec steamy windows that turned out ok in the end. I take it the GoPro yielded no useful footage (or did you forget to check it 😂). Pretty sure that's the code for auto locking though. Thought Cruise-Control was: ⏹⏹▶️⏺⏺🔼◀️🔽🔽
+Ed Chambers unfortunately me and my limited knowledge of go pros ended up in a time lapse of 4500 photos that my computer didnt have the power to stitch together 😂
Another brilliant video Mati, going to do this on my A3, keep the videos coming.
Thanks mate! Very easy to do in reality, although was quite scared to attempt it at first 😂
I have a similar Audi the back lights are different also on a 59 plate ghost lights I only have the red light on the side nothing under the door other than a plastic cover can I get puddle lights for my A3 sports line no body will give a straight answer yes or no or light convertions
How hard do you think it would be to retrofit a parking sensor? My car is missing one.
Following debating retrofitting them myself
What's best place to buy the cowling and levers? I have a 2009 2.0tdi manual and hoping to install this
Would just go to a breakers yard or failing that get on ebay!
Hi, did you have any traction control issues or absa coding issues after?
Hi Mati can you tell me the part number of the lower cowl that you purchased
Can I use the same procedure for a manual Audi A3 2009 1.4 TFSI???
I’m wanting to fit a cruise control to my 2001 mk3.5 golf cabriolet 2.0 litre. I got the cruise control bits off a breaker car but it was manual and mine is automatic. Looks like it’s going to be a difficult job. Any tips to give me? 😁
Just install my cruise control now my car won’t start any idea? Cheers
I thought it was impossible to install and can only be done during manufacturing?
Is retro fitting the cruise control the same as getting it from from factory? Or is it not the same?
Same as factory, but not as easy to fit as what he makes it seem if you haven't done it before or not used to working on them VAG cars
I’m trying to find the cowelling stalk box but I can’t seem to find it?
Hi Mati
I have just watched your video on "Cruise Control" and I have some questions ;
1) My steering wheel does NOT have the extra buttons as seen on your steering wheel, am I OK to go ahead and fit ?
2) I do not have a computer game BUT I have a MAXIECU reader, can I do the coding from there ?
3) How do I know that the steering wheel is correctly lined up, are there any Audi marks for reference ?
Tony
As far as I know mate you need the multifunction wheel, cant help you with the coding Im afraid as I did mine on VCDS at a garage so thats the only way I can confirm works. As for the steering wheel just make sure you put steering lock on before you start and try put it back the same as you take it off 😂 you will know when you drive it if you need to move it a spline
@@matimcfetridge Many thanks Mati
Hi there Mati
I have been considering undertaking this on my 8P1 ( 2009 ) 3 door hatchback but I have been put off by the connection to the accelerator and brake connection.
While watching the video I see that you did not touch either of these so am I correct in thinking that this can be achieved with the use of my MAXIECU OBD 🤔 🤔 🤔 🤔
One last thing can you please tell me the Audi Part Number of your "engine cover" because all the ones I am seeing have the oil filler hole on the right hand side 😊😊😊😊
Hi, I have Audi A3 2009 plate I really want to fit cruise control in my Audi. Can you please explain where can I get this kit and where I can get it coded from. I would really appreciate that.
Kit from eBay, can get it coded at pretty much any garage. Cheers!
@@matimcfetridge thank you very much.
like like like. awesome starting. I like it. Greetings From Türkiye
Great video mate. How did you get it coded?
Just long coding on VCDS mate, most garages can probably do it!
Can this be done with a manual 8p as easy?
Don't see why not, still got an electronic pedal!
Heyy what other parts are needed besides the limiter switch or what is the limiter connected to function
Steering wheel cowl and the indicator stalk is all you need mate 👌🏼
@@matimcfetridge thanks 😘
Mate what is the tool called you used for take off the steering Size 12 multi ___ ?
Spline
Wow I need this! Where did you get the parts from? I'm going to see if a garage will do this for me as I'm allergic to manual labour.
+Patrick Williment haha allergic 😂 can just get them from ebay mate! Thanks for watching
I'm now trying to find someone who can do this for me who is near suffolk... anyone know of somebody????
@@matimcfetridge how much were these units on ebay as I'm finding them around £200 is that right?
I would have said £80 or in the region of that?
@@patrickwilliment2462 did you find anyone close to Suffolk ?
Have you had the glove box common vibration yet? Mine has just started and it’s flipping annoying
Haha not yet, one to look forward to though 😂
@@matimcfetridge
Just me then 🤦♂️
where can I find this?
Where do you get the code from 😊
Where do you take it for getting coded and how much is it. I’m looking to do this but new to all this 😁👍🏼
+TOm LAming any garage with VCDS will do it for you mate, only takes a few minutes! Each garage will probably charge differently
@@matimcfetridge thanks mate!
Wait? What year is you A3? Cruise Control in my 2007 1.9TDI A3 from factory.
2010 mate, mine just didn’t have it from factory and its something I wanted!
Do you know if its possible to drive the car again before coding? I've read somewhere you need to clear some fault code or something... I'm gonna do the retrofit but I'm relying on a friend for coding so hoping I can do it at home and then drive round his.
Yeah I drove mine to that garage that coded it mate 👍🏼
Hi Mate,
Is this will work for 2010 Audi A3 1.4 TFSI?
Can I buy it online?
It will.
Matt how does this control the throttle?
+Jonathan Hardy honestly I have no idea, it just holds it at whatever speed you’re doing
Thanks mate!
Just installed mine and coded with Obd11
Straight forward!
Easy enough with a can do attitude 👍🏼
Can you help me with how you coded it using OBDeleven?
Is that PS2? GT
+Seabass Fillet hahah was just for dramatic effect but yeah I think it is 😂
Will the indicators etc still work before being coded?
Can I use the same procedure for a manual Audi A3 2009 1.4 TFSI???
Yes.
How do I know if my audi a3 2005 1.6 fsi can be fitted with cruise control without installing any cables or a ECU?