DIY Metal Melting Furnace at Home l Homemade Metal Foundry l
ฝัง
- เผยแพร่เมื่อ 15 ม.ค. 2021
- Hi friends today I am going to show how to make metal melting furnace at home. You can melt aluminum , copper , Zink , lead etc
You can get the materials here
Clay Graphite Foundry - amzn.to/3nzXrcq
Aluminium Silicate High Temperature Insulation - amzn.to/3lX7cRv
Thank you for watching . - วิทยาศาสตร์และเทคโนโลยี
I'll add this to my favs, It may take a year, but I'll get this stuff
For aluminum and things with lower melting points( Lead Zinc((don't heat too high with zinc!!))at the very least I can confirm that this build will work for an intermediate+ build. I've had success with beginner builds involving plaster of Paris+concrete+steel wool. The crucible they are using is superb compared to my steel diy one. Also I used lump charcoal+hairdryer build, but propane is gonna be better in terms of cleanup and fuel replenishment (granted that propane has more preparation requirements, but is easier to regulate). Happy melting to all and A++ on vid! I really enjoyed it! ALSO!!! ***SAFETY SAFETY SAFETY***!!! HEAT YOUR GRAPHITE AND Metal MOLDS TO AVOID STEAM EXPLOSIONS. Also from experience, slow down when dealing with these temps! I've several burns from my own amateur mistakes (Grabbing hot objects, splashes, etc...) This is a FUN hobby, but despite all precautions: mistakes will be made. Take as many precautions as possible to minimize injury as they can.result in SEVERE TRAUMA. That being said, this is the most enjoyable hobby I've ever had and well worth the time, research and investment. Do your research and enjoy the fruits of your labor! Wear appropriate respirators!
can we melt brass with this spect?
Best comment, thanks man
Can we use this furnace to gold?
I been wanting to make me one to play with and this was a great video and I'm going use it to make mine...Thanks
Excellent! Thank you!
Tem ter um suporte pra não encostar no piso
Awesome Video and Thank you for making this..... I’m going to make one from your idea..... I STARTED POURING BUT WANT TO MELT COPPER AND BINGO HERE WE GO...... AWESOME JOB
I mean I've got nothing to say against the kiln making and using, but with such a bad cast at the end you may as well just use an ingot and grind it down from there. could have put a little bit more effort into that one.
Very good!☺👍🏻
Ahh, it all makes sense now. This is how everything I order off Amazon is made
Nice work in making melting furnace 👍
0.46 ઘણુંજ સરસ. I saw a (ગુજરાતી) Gujarati Newspaper wrapper. Kudos from US.
Cool furnace..... and at (8:50) nice letter opener.
you are wonderful! your way are very practical, how long can you use this furnace?
Para hacer la daga, puedes emplear arena pero con dos partes en el molde y con un vertedero y un desfogue. El acabado es casi perfecto desde el desmolde
वाह!! मौज कर दिए 😁😁*👍*
Can you make a dagger from iron and silver as the blade
Muy buen trabajo!
Se lo puede mejorar haciendo que la llama incida tangencialmente a la pared interior del horno.
Tis is very good job thanks for you
Hey, what is the dimension for casting clay graphite
Very good!
pity that the object you cast is not ideal in aluminum!
.....uhuh. but folk were happy with only copper in the copper age . Perhaps melting down old pistons would give a harder product but impossible to file down with steel files or to machine .
What do you mean Mr.gamb
@@BetaTestedUrMom Knives are better made of steel.. He could have cast a cool knuckeduster if he wanted a light weapon.
My opinion only though, I was impressed with the home made furnace
Kya isase ceramic pot ko Sikha जा सकता है सर जी
quick question , whats to keep the nozzle and pipe from heating up and causing a explosion ?
the gas in the cylinder gets cold with time from extensive use, so then they just put it in water, so that explaosion will never happen
@@etiennenel4494 how gas cylinder gets cold ??
@@kishanpreston1533 due to escaping of gas (effusion) from the cylinder
@@sa_ad thanks for advice Bro ❤️
@@etiennenel4494can we melt brass with this video set up?
Really cool and I will like to make this to melt my metals. May I ask what are the stuff you put in at 2:47 - 2:55?
Just some metal wire and steel wool, it’s to reinforce
I am talking to you
Very good project
Would this work for melting bronze?
Thanks sir
عاش نصارة بدون فلفسة فديو خفيف 😊😊😊😊😊
Wow nice bro 🤔🤔🤔🤔
I don't understand these videos it goes from how to make a homemade metal foundry to look how much work it took me to polish this aluminum dagger. like what happened to how to make The foundry the little tricks and stuff and measurements and all the little fine details. it is what it is
26% high crome ke liye chalta hai kya
Great video!
Is it possible to put list of materials in description of video?
Thanks BR
Good job ka-Metal lalabs always
Sar muje bana na he ye mitti konsi ladd rahe the ye whaite wali
Thanks
Good job 👏
Bro is it safe to cut the neck of gas stove like that?I want to try it but I am very scared of gas stove so I want to make sure that it is a safe way of doing it and nothing bad going to happen specially the gas part.
I'm also thinking about it bro if you know that pls reply me
@@bharadwaj_yadavalli I couldn't find the exact answer bro so I think I'll buy a professional Lpg brazing torch instead of risking my life with this DIY homemade torch and I think you should also do the same because god forbids if anything goes wrong it could easily turn into a tragedy.not worth a risk.
It's not safe
You could replace the gas for charcoal and a leaf blower. However, I don’t know.
@@fecalplushfucker4000 that'd be a too weak source to burn, i mean it will melt buf it'd take ages.
Where did you buy them by mails?
Do you melt copper with
Owww wonderful
i wonder why you add thread of metal in the mix? to stick the mix together?
Can we melt brass
Is it ok if I use plaster of Berlin?
Beglati konse ceez men ho yaar ..plz plz batana
Great effort broii
Vvvvv good thanx
Nice👍👍👏👏
Very great video. Is gas propane or LPG?
lpg
thanks for sharing
I am worrying about if it blast after reaching high temperature around 1000c
If I have to melting silver can use this?
Yes can
where to buy the set
Wow
Balti ke andar Kiya mteriyal lagaya he whait colour ka
Looks like you started with an abrasive disk and moved on to a sander. Did it explode on you?
Fascination
Apakah harus ada ketebalan minimal untuk ketel tempat peleburan aluminiumnya?..tks salam dari putwokerto jawa tengah indonesia👍👍👍👍👍
gimana pack sudah di tes ?
@@mikkiwirawan11 maaf sekali belum saya coba..sy masih dalam rencana untuk bisa melebur limbah aluminium untuk dicetak menjadi velg racing🙏karena untuk sekali lebur diperkirakan membutuhkan 10 kg limbah aluminium..jd masih merancang volume ketel yang tepat dan bahan bakar yang murah
Love it
casting clay graphite or aluminium silicate blanket Kaha se. mangaya
अमेजॉन 💯
What can be put in it it melts like water
Great Thank you for sharing!
Donde puedo conseguir un crisol aquí en Mexico edo. Naucalpan
Alternative for aluminium silicate blanket plss
if you dont want to waste you gas to heat the soundings, spend some money
Where do you buy a metal melting po
el yeso con arena se cuartea mucho y se daña no era mejor cemento con arena?
Si usaba el cemento no podría hacer ese agujero para la gas. Pues los dos funcionan igual.
Bạn mua bao nhiêu tiền cái nồi nấu kim loại vậy bạn ơi
Hi....this furnace require high pressure gas?
Not exactly high pressure but a clean source of fuel, becz u don't want a orangish red flame. The more ble the flame the more better
Your metal looked a little bit low in temp when poured. Maybe leave it like a few minutes longer . Otherwise nice
Nahi Bro, He melted Aluminium and It has a really high surface tension, that's why it was stopping in crucible before pouring
can we melt brass with this video set up?
Can u use a heat gun on a furnace and see if it will melt the metal. Could a heat gun replace gas or even using a blowdryer. Will that be hut enough.
Dude wtf u saying hairdryers aren't even close to heating the crucible, let alone heat guns. U need a strong source of heat, u melting metal, not plastic bro
are you insane? lol no you can't use a heat gun or a blow-dryer to melt... a heat gun gets to like 800-1000F max, to melt aluminum, which has the lowest melting point of all production type metals, requires 1220F(660C) minimum. Brass requires 1810-1880F (990-1025C) Copper requires 1983F(1084C) to melt iron is even higher, needing almost 3000F (around 1600C) Titanium requires the highest of those 3040 F (1670 C)
you can't even get close to melting anything useful out of a heat gun, a blowdryer is far far far weaker than even that. lol
People sometimes use a blowdryer to force air in, in addition with the propane or natural gas) but it can't melt anything metal at those low of temps.
Too funny 😂🤣.. hairdryer...the heat gun has possibilities.,. I'd imagine it as the interior and you'd have to build a furnace around it to contain the heat...I bought an electric metal melting furnace and it's basically heat coils wrapped around ceramic surrounded by insulation and then metal ...so a heat gun isn't so crazy sounding
Copper is also possible?
Nice video🎉
can it melt stainless steel
no probably not
How we can buy Graphite crucible
Where can i get these meterials
what is that holder called? Like the cup thingy with all the metal inside. :-)
Crucible
@@mikeydontlikey1 i figured it out. But thank you so much!❤
bravo
I have the exact steel balti 🤓
আসসালামু আলাইকুম ভাই ওই জিনিসটা আপনার কাছ থেকে কিনতে পাওয়া যাবে??
vai je patile oi patulta kiser daya kore bolben
What is the name of white material
achei meio merdeiro ,mas conseguiu fazer funcionar ,isso que importa
看了鬍渣影片來這裡報到
Which material
How much the price of Gas propane melting furnace
What price this melting machine
what is the stuff he is putting in the mix that looks like grass?
I think it's thin wires for support and to make it durable
4:56 what is pot made of?
I heard that plaster of paris can explode ? Help i need help!!!
wow
How hot can the furnace get?? Can it do more than 900°C??
defenetly it can get to temperatures of up to 1200 which is enough to melt aluminum and iron and anything more reactive then those
Make more 👌👍👍👍👍👍👍👍👆👆👆
Di coba bahan yg keras
charkol.geriphit.ko.kese.kharidhe.ge
Where did you get the brown sand?
wet sand
Dudes were making way better swords 5000 years ago. If only they had TH-cam.
Nice work bro 👍 but what kind of gas you made ? Is a cooking gas !? Please reply !?
good
1500C can melt steel. Could you try that please ? :P
❤❤Love
CASTING FURNACE!!!!!!!!
Gold, Silver, Scrape, Copper, Aluminum Melting Propane Furnace
Please a new rc plane