What size dowels do you use, my husband used a1/4 inch in the top hole and a 1/8 inch in the bottom hole he drilled the hole in the kangaroo 19/64 bit and also used washers between legs and body
It's been a minute since I've made one, but I'm pretty sure I only used 1/4" dowels for both spots. The washers is a good idea, I just left a little gap.
Thank you so much for sharing this video on the Hopping Kangaroo toy. I am excited to make for my two granddaughters. How do I avail of the template? Thank you so much for your response, appreciate it so much. Blessings!
Thanks for watching! The link for the template should be in the description of the video. The template is free to download from our website: www.Boydstongrove.com
Thank you and YES! The template is available for free on our website. the link is in the video description, or you can just go to www.boydstongrove.com
What type of wood did you use and what thickness? Thanks for sharing this project with everyone!
I used .75" thick pine boards: standard 1 by material in the states.
Little tip from scroll sawing. Put stick on plastic book cover onto the wood, then spray adhesive to that. Pulls off cleanly when done
I actually have a roll of that stuff that I use for the CNC. That's a real good idea, thanks!
Great idea for someone with limited tools, thanks
Yes, super simple project but it's a lot of fun. Grab the template off our website, it's free!
Nicely done, thanks
thank you!!
new sub thank you. got the template so thanks again got a new scroll saw
That's awesome, thank you! Have fun making it!
Big thanks from Canda !
Thank you for watching!
Nice and simple
thank you, and thanks for watching!
What size dowel do you use for the kangaroo?
If memory serves me correct, it was 1/4 inch. That's what I use the most for toys.
I love him/ her😊 great toy!
Great job and thank you.
Glad you enjoyed it. Thanks for watching!!
What size dowels do you use, my husband used a1/4 inch in the top hole and a 1/8 inch in the bottom hole he drilled the hole in the kangaroo 19/64 bit and also used washers between legs and body
It's been a minute since I've made one, but I'm pretty sure I only used 1/4" dowels for both spots. The washers is a good idea, I just left a little gap.
Fun, thanks
Thanks for watching!
Great
Thank you so much for sharing this video on the Hopping Kangaroo toy. I am excited to make for my two granddaughters. How do I avail of the template? Thank you so much for your response, appreciate it so much. Blessings!
Thanks for watching!
The link for the template should be in the description of the video. The template is free to download from our website: www.Boydstongrove.com
Cool build.. do you have the plans for that so I can build my own for the kids?
Thank you and YES! The template is available for free on our website. the link is in the video description, or you can just go to www.boydstongrove.com
LOVE ITTT🎉🎉🎉🎉
Thank you!
Love it! Beautifully made, and well-produced content as well. Thank-you
Thank you! We’re trying to get better with producing, definitely a learning curve.
Nice😅
Thanks!!
I add just a very small piece of sand paper under the front leg and that work for me...
That is an excellent idea! Thanks for sharing!
Hi, congratulations for the job!! where are the plans please... for my granddaughter... thank you very much
There's a link in the description of the video. Or you can hit this one:
www.boydstongrove.com/shop/hopping-kangaroo-toy-template
Splash a little mineral spirits on the pattern and it will come off, that’s what my husband does
Huh, I've never tried that, thanks! I usually just use a heat gun.
Where are the plans/stencil? Thanks
nevermind I found one on the internet, and I just finished the project :)
The plans are on our website, the link is in the description. Probably the same as what you found though.
@@pimc172 were you find the plans? i canot sign my order at the site he post, Im from Mexico, problems with the adress, I hope you can help
Hiya, could I have a template please!
The template is free on our website, here's a link: www.boydstongrove.com/toys-games/hopping-kangaroo-toy-template
why doesn't the pattern print
Not sure. It sounds like it would be a printer issue, but if you e-mail us at www.Boydstongrove@yahoo.com I can send you another copy.
it prints first page but not second
Sorry for the frustration, Not sure what the issue could be. E-mail us and we'll get you another copy.
Never got the template
The template is free to download on our website.
Can I get the template?
Yes!! It's on our website, there should be a link in the description of the video. Have fun making it!!
Siz de buraya missiya etmək üçün gəlmisiniz?
I'm sorry, I tried to translate, but i still don't understand.
Your face is a little squashed
Ha, I don't know where to go with that. I guess that happens when I'm taking selfies for my video tags, lol