AXIAL SCX10 - PROJECT BULLET PHASE 8 DRIVE SHAFTS
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- This my build series on the Axial Scx10 titled Project Bullet. In this video I assemble and install the MIP drive shafts onto the axles and transmission. Enjoy the video my friends and thanks for watching!
iROCK STUDIOS LLC
PO BOX 5053
KAILUA KONA HI, 96745
iROCK™ RC/ iROCK™ Studios © 2014 iROCK STUDIOS LLC. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of iROCK Studios LLC. iROCK Studios LLC is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the iROCK RC film series broadcast on TH-cam is intended for entertainment purposes only.
These Axial Scx10 Phase Vids Are Going To Help Me Big Time With My Build. Awesome Work IRock.
Excellent demonstration, very well.
Hey iROCK! Great job bud. Looks like the project is off to a great start. Thanks for sharing and happy building bud.
Looking good...
Great video! Looking very good! That RC is going to be awesome!
That rig is so sick bro!!! It's a shocka!!!
Yeh. The lower control arm got switched around. Very nice build vids buddy. :)
awesome work as usual my friend have fun rcing
Can't wait to get an SCX-10 so I can MIDWID.
Great build bro!
That right is looking sick brother sweet
Man bro that's gonna be a tank!!
Sweet Build! !! 100% beefy
That's is one tough rig. =] liked.
Can't wait to see it finished!
bomb proof!! nice upgrade!
Seen it @ 3:19 the input shaft on rear pumkin angle fixed and went from down to up Awesome glad it was fixed but wanted to see why it was facing down if it was the links reversed or pumkin and tubes not lined up because of all the different location options with how there made
Pretty good work man , liked
Hello irock. Nice equipment here. I'm looking forward to seeing the final rig.
Just one comment : it may be the video or just me but the angle of the rear axle's driveshaft is strange. Try to type "drive shaft angle" in google for more details. It can be adjusted with the length of the links. Thanks for the video.
Bro you have awesome video (keep pulling the trigger my friend)
Cool
Thank you Gerund!Gerund Lanada
Awesome video Bro!
Thanks a ton Skip!HighVoltsRC
This is Art of building :O
Awesome! Happy halloween :)
Great vid Rock, whats in the contact lens container? thread lock and grease?
Eye candy
Ahh so sexy I've been dieing for some of those axles !! Lookin good !!
Now you do know my friend...That you have to start all over and do this ALL with the 1/8 Yeti right? :)
Who makes those axles
What's up iRock, I tried to put some MIPs on the scx10 but one end rubs on the spur cover. Is it safe to run without that cover or does somebody make a slimmer case? Thanks in advance.
Mostly likely you won't run into an issue but anything can happen out on the trails. From my experience I haven't had a problem running the Scx10 without the spur gear cover. The Tf2 & Gelande 2 don't have spur gear covers and I haven't had a problem with them either. When Axial first came out with the Scx10 it didn't come with a plastic spur gear cover. It became a safety concern for children so all of their RC's come with a spur gear cover. If you still want to run your Scx10 with the spur gear cover I would recommend going with an extended output shaft from www.supershafty.com Hope that helps my friend! Dan P
That helps a lot! Thanks brother! First I'll cut the section out that rubs and see how that works...but good to know I can run without it. One of my concerns was wires getting caught.
Guarantee that sucker didn’t run right after this vid mip’s can’t angle like that mine had the gmade 93mm and they were binding I’m pretty sure those are the 103mm he has so 😬. Someone please prove me wrong lol
Shaka and I'm out!
:-)
Yeah..... NO Shaka!
Can you plz give me a part number for the biggest, strongest, and coolest axles for an scx10 thanks :)
Front axles: www.rpphobby.com/product_p/vps06601.htm rear axles: www.rpphobby.com/product_p/vps06602.htm www.vanquishproducts.com/axial-scx10-parts/ Hope that helps my friend and thanks for watching! +igorgamingrc