hello Alvin, congratulations for the video you are fantastic, but I won't forget the opportunity you gave me to have a Denafrips pre amplifier Athena I'm very happy with the performances. I strongly recommend the seriousness of Mr Alvin and Denafrips to everyone. BEST regards.
Hi Alvin... great video explaining I2S!! One thing you explained was In-Phase test signal should sound down the middle / in the center from two channel speaker output. You played back Out-Of-Phase test signal, but I did not hear you say how it should sound coming from left/right two channel speaker output. Please advise what correct Out-Of-Phase sound output should sound like... thank you 😊.
What is needed today are multi-channel DACs with HDMI input to play SACDs processed by the Sony UBP-X800M2. This is the bottom-line, since the X800 is the ONLY means today for multi-channel SACD pleasure.
Hello Alvin, nice to put a face on your name, since we previously communicated via e-mail on numerous occasions. Thank you for this fine video which timing is appropriate, since I will be placing my order for the Hermes DDC next week. The configuration of the Hermes/Pontus is pretty straightforward. Is the I2S setup the same for the T+ DAC (0,0,0) as the Pontus? Thanks, Daniel
Hi! with all the uncertainty that surrounds i2S cables, is there a cable brand that you would specifically recommend? one that you know, will, without any doubt, work with the Hermes and Pontus. Thank you.
@@VinshineAudio Thank you Alvin for your recommendation. I certainly will when the time comes for me to get the Hermes for my Pontus II, which I think will be soon :)
I would love to see an I2S input into the DDC with an option to change the I2S pinout. This would also help to fix compatibility problems between a source and a DAC that only supports one specific I2S pinout like Gustard R26.
Thanks for the suggestion! DENAFRIPS Hermes and Gaia DDC’s i2s pin out is configurable. This may fix the compatibility of the i2s with third party DAC.
@@VinshineAudio Not really because none of them does provide an I2S input. My CDT does only provide an I2S output but not an USB output which is needed for Hermes ans Gaia.
Thanks for the clear explanation. I now own the Pontus 2 + Hermes. I configured both to the 000 mode for I2s. In this configuration both pcm and dsd can't go wrong, or do I miss something. I don't own dsd music so I can't test this right now. Thanks Jakob
Greetings De Audiofilos and Locos. I also have an Oppo bdp 83. Do you have the 83 going directly to a Denafrips DAC? If so, can you share the setting that worked (000, 001, etct)? I am trying to get the I2S connection to a Pontus II with an HDMI cable I have available. I wish there was a list of HDMI cables that do work with I2S as that part is an unknown.
@@richardrios7362 you need a box from eBay that costs $50. It extracts the dsd into i2s format, you cannot connect directly from the transport to the dac,because of the built in copyright protection. I have a video about it in my channel.
This article might be of interest to you: audiophilestyle.com/ca/reviews/at-long-last-listen-to-your-physical-sacds-through-an-outboard-dac-r971/page/3/
Thank you Alvin, can you tell me if i need a reclocker between my MacBook pro and the Pontus 2, also, do you plan on issuing a silver version of the more affordable unit? Best regards, much respect. Francois.
Hello 👋 I have a question if anyone can answer it. I have a pontus ii. The specs already state that audio is buffered and reclocked inside the pontus using its own crystal oscillator. What is the benefit of using another ddc on top? Does it contain better components or is there some other reason to use it?
I just purchased the Ares II knowing it does not have the I2s connection because the Pontus II is a bit of a reach. The British Audiophile on TH-cam has a great video on the use and benefits of a Denafrips DDC/Pontus II and he is much easier to understand despite the British accent. His video is in fact the reason i went with the Denafrips Ares II. The long and short of it is the I2s connection is way undervalued and companies "have" to start using this type of connection for improved sonics. My understanding is the DDC components are of little value without a I2s connection since RCA's offer only a small noticeable improvement. Perhaps Denafrips can incorporate a "work around" since manufactures will lag behind until audiophiles demand they use a I2s and drop an optical connection in favor of the I2s or something to that effect. However, i am only too happy to watch Alvin's videos for the sake of learning and knowing he has made a path to advance some great performers to the USA. Having said that I think he needs to treat his room to control echo and maybe practice before filming, (for the record i am not Alvin bashing). He is leaps and bounds ahead of me in all respects connected to audio.
hello Alvin, congratulations for the video you are fantastic, but I won't forget the opportunity you gave me to have a Denafrips pre amplifier Athena I'm very happy with the performances. I strongly recommend the seriousness of Mr Alvin and Denafrips to everyone. BEST regards.
Thank you Jose, I appreciate your support! Miss Port Wine!
Hi Alvin... great video explaining I2S!! One thing you explained was In-Phase test signal should sound down the middle / in the center from two channel speaker output. You played back Out-Of-Phase test signal, but I did not hear you say how it should sound coming from left/right two channel speaker output. Please advise what correct Out-Of-Phase sound output should sound like... thank you 😊.
Looks very complicated , get to know more on this, but definitively your vlog helped a lot in diluting the difficulties.thankyou .
Practice makes perfect! Cheers 🍻
Great Video Alvin!! Keep them coming.. so looking forward to the listening room tour!!
Cheers
More to come sir!
I love that the Denafrips I2S pinout on the Pontus II works with Soundaware D300 Roon digital streamer. Plug and Play 😀
Very cool! Enjoy the music!
Can I use normally HDMI cable in market to connect Denafrips DDC to Denafrips DAC or Rockna DAC. Plan to buy Denafrips ĐC
Hi Jacky, good quality HDMI cable
Thanks for the tutorial, easy, straight forward way to set the equipment!
Glad the video guide is helpful1!
Good job Alvin! Please keep the helpful videos coming. Regards, Dean S
Thank you, Dean :)
Great job Alvin. This was very helpful. Keep it up.
Thank you, Paul. Glad to be of help!
What is needed today are multi-channel DACs with HDMI input to play SACDs processed by the Sony UBP-X800M2. This is the bottom-line, since the X800 is the ONLY means today for multi-channel SACD pleasure.
Thanks for the feedback sir!
Great video Alvin east to watch and very helpful
Thanks Matthew. Please pardon my strong accent :)
Hi, just to be sure, the DDC is not required to connect the DAC to the streamer via I2S, just a nice to have, correct?
Hello Alvin, nice to put a face on your name, since we previously communicated via e-mail on numerous occasions. Thank you for this fine video which timing is appropriate, since I will be placing my order for the Hermes DDC next week. The configuration of the Hermes/Pontus is pretty straightforward. Is the I2S setup the same for the T+ DAC (0,0,0) as the Pontus?
Thanks,
Daniel
Hi Daniel, thank you! Configuration of the i2s is similar. Guide can be found here: www.denafrips.com/config-tplus
Nice job Alvin! Greetings from kvsaudio !
Thank you!
Hi! with all the uncertainty that surrounds i2S cables, is there a cable brand that you would specifically recommend? one that you know, will, without any doubt, work with the Hermes and Pontus. Thank you.
Hi Mike, you may consider Audioquest HDMI cable
@@VinshineAudio Thank you Alvin for your recommendation. I certainly will when the time comes for me to get the Hermes for my Pontus II, which I think will be soon :)
I would love to see an I2S input into the DDC with an option to change the I2S pinout.
This would also help to fix compatibility problems between a source and a DAC that only supports one specific I2S pinout like Gustard R26.
Thanks for the suggestion! DENAFRIPS Hermes and Gaia DDC’s i2s pin out is configurable. This may fix the compatibility of the i2s with third party DAC.
@@VinshineAudio Not really because none of them does provide an I2S input. My CDT does only provide an I2S output but not an USB output which is needed for Hermes ans Gaia.
I have the R26 successfully paired with a competitor's DDC featuring configurable pin out.
@@DanielJackson-f4t Great, and which one?
Thanks for the informative video Alvin 🙂👍
Most welcome Roy!
Thanks for the clear explanation.
I now own the Pontus 2 + Hermes.
I configured both to the 000 mode for I2s.
In this configuration both pcm and dsd can't go wrong, or do I miss something.
I don't own dsd music so I can't test this right now.
Thanks
Jakob
Hi Jakob, thanks for the feedback. Please reach out to us if you need further assistance: support@vinshineaudio.com
@@VinshineAudio Will the Musician Pisces DDC use same as Denafrips Iris mode 000 for Pontus II?
If you connect l2s only with the Jay’s cd transport ……..Pontus/Jay’s …….do you still need to configure this setup ?!?
Yes sir, please go through the i2s configuration.
Great explainer video as always! I only wish the Hermes came in silver to match my silver Pontus II. :)
Glad you like the video, I appreciate it sir! Hermes comes in black only :)
@@VinshineAudiohow do you adjust I2S for Iris? You have no instructions anywhere. Please help
Hi Alvin. Great video. Can you recommend some I2S cables?
Hi sir, you may consider good quality HDMI cable < 3ft/1m length :)
Great job Alvin, you are number one.
Thank you, Giordy. Just doing my job :)
thank you Alvin! I am enjoying my i2s connection with Oppo bdp 83!
Greetings De Audiofilos and Locos. I also have an Oppo bdp 83. Do you have the 83 going directly to a Denafrips DAC? If so, can you share the setting that worked (000, 001, etct)? I am trying to get the I2S connection to a Pontus II with an HDMI cable I have available. I wish there was a list of HDMI cables that do work with I2S as that part is an unknown.
@@richardrios7362 you need a box from eBay that costs $50. It extracts the dsd into i2s format, you cannot connect directly from the transport to the dac,because of the built in copyright protection. I have a video about it in my channel.
This article might be of interest to you: audiophilestyle.com/ca/reviews/at-long-last-listen-to-your-physical-sacds-through-an-outboard-dac-r971/page/3/
Alvin, any link to the test tracks that you played ?
Here you go sir: www.denafrips.com/config-i2s
Hi, another track but I think it will help ;) - th-cam.com/video/kUT6ZhFdLkA/w-d-xo.html
Hi. What is the track or dsd file using to test the i2s setting?
Thank you Alvin,
can you tell me if i need a reclocker between my MacBook pro and the Pontus 2,
also, do you plan on issuing a silver version of the more affordable unit?
Best regards, much respect.
Francois.
I would recommend, but depends if your amp and speakers being good quality
You nailed it sir. It really depends on how revealing the system is to tell the difference :)
Hey Francois, Iris/Hermes comes in black color only. It's a great companion with the Pontus II DAC
Nice to see a face to your name Alvin!
Hey, thanks!
When you receive dsd is it dop or native dsd.
.
why are there no remote controls? this is realy unusual. at least power and input switch...3 buttons.
Are there any printed instructions for I2s configuration?
Here you go sir: www.denafrips.com/download-pontus
Thanks Alvin.
Most welcome RJ!
I have the original Pontus do i
need a DDC to use I2s or can i use Windows 11 laptop with software?
Hi Alan, if you are happy with the sound quality, you may not need a DDC :)
Alvin - you did a great job explaining
Thank you Adrian, I appreciate it.
great video & info!
Glad it was helpful!
Hello 👋 I have a question if anyone can answer it. I have a pontus ii. The specs already state that audio is buffered and reclocked inside the pontus using its own crystal oscillator. What is the benefit of using another ddc on top? Does it contain better components or is there some other reason to use it?
Glad to be of help sir!
@Vinshine Audio hi thanks 👋 so is there a benift to use this with a pontus?
Genelec speakers are awesome! :)
Loving the Genelec 8020s :)
Great review👍
Thanks, Mark :)
Great video!
Glad you enjoyed it
My Iris only have one button
shame my ares doesn't have I2S and the pontus is too much for me :(
Same here but i am happy for my Ares II, maybe one day.
I just purchased the Ares II knowing it does not have the I2s connection because the Pontus II is a bit of a reach. The British Audiophile on TH-cam has a great video on the use and benefits of a Denafrips DDC/Pontus II and he is much easier to understand despite the British accent. His video is in fact the reason i went with the Denafrips Ares II. The long and short of it is the I2s connection is way undervalued and companies "have" to start using this type of connection for improved sonics. My understanding is the DDC components are of little value without a I2s connection since RCA's offer only a small noticeable improvement. Perhaps Denafrips can incorporate a "work around" since manufactures will lag behind until audiophiles demand they use a I2s and drop an optical connection in favor of the I2s or something to that effect. However, i am only too happy to watch Alvin's videos for the sake of learning and knowing he has made a path to advance some great performers to the USA. Having said that I think he needs to treat his room to control echo and maybe practice before filming, (for the record i am not Alvin bashing). He is leaps and bounds ahead of me in all respects connected to audio.
Pontus II DAC for you sir? It comes with i2s input :)
www.denafrips.com/pontus
Thanks for the feedback, Don! I will do better :)
Finally saw the man behind bineshine right?
Alvin it is :)
We don’t care. More vidz please!
Already did!