Extraordinario trabajo de este personaje, hoy dueño de ese imperio de los drones Dji, por favor no se olviden de actualizar siempre el software de los drones que les dieron renombre a su empresa como el poderoso Mavic Air1, spark, Mavic pro, lo mismo su pantalla Crystal 5.5 y 7.8 gracias
This video shows the base plate being mounted sideways. If you want to mount a front facing camera gimbal you should mount the base plate the other way.
what is the size of the wire coming off the board to the xt60 for the battery? My battery has 10 awg cable, does that mean I MUST use 10 awg cable to the board or can I use 14 awg?
hi marcuelcajon, I am experiencing the same issues as you now. I am using apm 2.5 with power module. How should i connect my battery to the board? Much thanks for you reply.
the connection plate on the power distribution board came off when i heated it too much,, there is no metal plate for one of the esc's positive wires now. what can i do?
hey, im up to the soldering part but i dont have the necessary tools to do the soldering.. so is there any alternative methods i can use? i need to complete this within a week or so, so a quick reply would be most helpful
sicaxav hi i can help but maybe I am late sorry btw you can use tape to like keep it attached to the soldering pads but it won't be secure so for a secure connection use a soldering machine cuz or else the wire might come out during flight with tape
Well not the best soldering job I`ve seen, might be some cold soldering there with breakdown after a wile, give a little more heat and hold it still a little longer after removing the heat! Better to use a more powerful soldering iron, then the time to heat it up is less and the heat doesn`t go that deap in the board and the conector.
Bill James Oh yes, if you take a look you notice that she moves the solder around with the iron and that means there is too little heat and the cale should be still until the solder has gotten hard again, now it does not...
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
Extraordinario trabajo de este personaje, hoy dueño de ese imperio de los drones Dji, por favor no se olviden de actualizar siempre el software de los drones que les dieron renombre a su empresa como el poderoso Mavic Air1, spark, Mavic pro, lo mismo su pantalla Crystal 5.5 y 7.8 gracias
This video shows the base plate being mounted sideways. If you want to mount a front facing camera gimbal you should mount the base plate the other way.
Loved the music :)
Harborfrieght has a solder gun 180 watt for 14 bucks right nowl
what is the size of the wire coming off the board to the xt60 for the battery? My battery has 10 awg cable, does that mean I MUST use 10 awg cable to the board or can I use 14 awg?
hi marcuelcajon, I am experiencing the same issues as you now. I am using apm 2.5 with power module. How should i connect my battery to the board? Much thanks for you reply.
the connection plate on the power distribution board came off when i heated it too much,, there is no metal plate for one of the esc's positive wires now. what can i do?
What is that Versatile (VU)? I am using this board with an apm 2.5 so instead of a VU what am I suppose to connect with the battery to the board?
But why doesn't the kit come with an XT60 plug? Now I have to go find my own somewhere
Many builders have other than connectors. The XT60 isn't universal. All my batteries have T connectors.
do someone know what esc is that
hey, im up to the soldering part but i dont have the necessary tools to do the soldering.. so is there any alternative methods i can use?
i need to complete this within a week or so, so a quick reply would be most helpful
sicaxav hi i can help but maybe I am late sorry btw you can use tape to like keep it attached to the soldering pads but it won't be secure so for a secure connection use a soldering machine cuz or else the wire might come out during flight with tape
What rating of wire to use?
You have to solder it
what is vu
Well not the best soldering job I`ve seen, might be some cold soldering there with breakdown after a wile, give a little more heat and hold it still a little longer after removing the heat! Better to use a more powerful soldering iron, then the time to heat it up is less and the heat doesn`t go that deap in the board and the conector.
Did you notice the video is speeded up?
Bill James
Oh yes, if you take a look you notice that she moves the solder around with the iron and that means there is too little heat and the cale should be still until the solder has gotten hard again, now it does not...
Johan Öhman That is a Chinese child laborer soldering that thing.
I bought some flux what the hell am i supposed to do with that shit?
Flux is used in soldering to remove oxides from the contacts of the parts to be soldered together. I use it every time!
very "quick" reply, lol
What is this PMU, Some videos I see attaching PMU parallel to main power input from LiPo battery.