INSTALLING AUDI S3 PARTS & STRIP DOWN ON MY CHEAP VW CADDY VAN

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ก.ย. 2024
  • In this video we start work on our cheap, high mileage #vw #volkswagen #caddy 1.6tdi...
    The van does have some mechanical gremlins (believed to be the oil cooler) which we will be addressed in the next video, but for now we are starting work in the back by removing all ply-lining, flooring, racking and anything else that could be containing the rancid smell in the van.
    After that is completed I address another issue on the van being the brakes. From factory the VW Caddy brakes are not the best so it was dying for a brake upgrade. After my friend fitted Lamborghini brakes on his Audi S3 his old brakes were up for grabs so we had to see if they would fit on my van!
    Email me
    Contactchrisslix@gmail.com

ความคิดเห็น • 63

  • @brun_s
    @brun_s 2 ปีที่แล้ว +1

    The rust if it’s not too bad, sand it back.. add a rust protector cover.. if no actually holes just give it a good coat of primer and it’ll be sound.. unles you want it to be in colour then base coat it and clear coat it.

  • @matthewbonner645
    @matthewbonner645 2 ปีที่แล้ว +2

    Mate get a vw sharan front end on it and front part interior for the carpets and nicer dash etc. fit the sharan seat bases then you can put all the newer gen vag seats in

  • @richardmoon3932
    @richardmoon3932 2 ปีที่แล้ว +2

    I had a caddy a few years ago that had a golf gti flat bottom steering wheel, looked really nice 👌

  • @mrjibrox
    @mrjibrox 2 ปีที่แล้ว +2

    Top work slix…Damn i do fancy a van like this to daily and tune

    • @Squatch2530
      @Squatch2530 ปีที่แล้ว

      ☝️ᴛʜᴀɴᴋs ғᴏʀ ᴡᴀᴛᴄʜɪɴɢ ʏᴏᴜ'ᴠᴇ ʙᴇᴇɴ sᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴍʏ sʜᴏʀᴛʟɪsᴛᴇᴅ ᴡɪɴɴᴇʀs ʜɪᴛ ᴍᴇ ᴜᴘ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎆 🎉

  • @griffogriff9532
    @griffogriff9532 2 ปีที่แล้ว +1

    Can’t wait to see what you do with this one 👍

  • @johnelbro127
    @johnelbro127 2 ปีที่แล้ว +7

    Prime and paint the floor for longevity, the soundproof with waterproof covering so it can be jet washed. Great video and love the brake idea. 👍👍👍👍👍👍👍

    • @Squatch2530
      @Squatch2530 ปีที่แล้ว

      ☝️ᴛʜᴀɴᴋs ғᴏʀ ᴡᴀᴛᴄʜɪɴɢ ʏᴏᴜ'ᴠᴇ ʙᴇᴇɴ sᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴍʏ sʜᴏʀᴛʟɪsᴛᴇᴅ ᴡɪɴɴᴇʀs ʜɪᴛ ᴍᴇ ᴜᴘ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎆 🎉

  • @Jdownesuk
    @Jdownesuk 2 ปีที่แล้ว +1

    Great Vid Chris - been thinking about getting a caddy to do up. What about Porsche brakes 🙈

  • @oresthse4668
    @oresthse4668 2 ปีที่แล้ว +2

    Put sound dentning on the floor.of the van and just make a flat floor that will be easier to use-work on...

  • @Tullyvision1
    @Tullyvision1 2 ปีที่แล้ว +6

    For the back of the van definitely use raptor bed liner so it will survive anything you have to throw at it. Looking forward to seeing what you do. Keep up the good work mate :)

    • @Squatch2530
      @Squatch2530 ปีที่แล้ว

      ☝️ᴛʜᴀɴᴋs ғᴏʀ ᴡᴀᴛᴄʜɪɴɢ ʏᴏᴜ'ᴠᴇ ʙᴇᴇɴ sᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴍʏ sʜᴏʀᴛʟɪsᴛᴇᴅ ᴡɪɴɴᴇʀs ʜɪᴛ ᴍᴇ ᴜᴘ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎆 🎉

  • @kaelturner9721
    @kaelturner9721 2 ปีที่แล้ว +4

    depends how bad the rust is, if its just surface rust then sand it down, spray primer and then upto you if you want to paint it or cover it with carpet etc...

    • @Josh_0579
      @Josh_0579 2 ปีที่แล้ว

      Or just leave it. Maybe I'm weird but I like a little surface rust on a shitbox especially when it's next to nice wheels on a slammed car

    • @kaelturner9721
      @kaelturner9721 2 ปีที่แล้ว

      @@Josh_0579 trapping rust will create more moisture and make it worse to maybe even a hole in the floor, why not spend 5 mins and sand it down and spray primer.

    • @Josh_0579
      @Josh_0579 2 ปีที่แล้ว

      @@kaelturner9721 on the inside I agree

  • @s28ero
    @s28ero 2 ปีที่แล้ว +3

    I’ve seen a few VW Caddy show vans and they sometimes have MK7.5 Golf R Steering wheels fitted which look mega.

  • @phatboydetails
    @phatboydetails 2 ปีที่แล้ว +3

    Chris, the mods available for Caddys are endless but personally I think they look spot on with Bentley wheels and I would have to have a stereo installation of some description as it's something I love doing 🔊🔊🔊

  • @DanielBall
    @DanielBall 2 ปีที่แล้ว +2

    Spray the floor with a heavy duty 2k paint. Hammerite is terrible nowadays and is purely sold for the DIY market. You could even use Upol Raptor for a textured finish.

  • @113animal
    @113animal 2 ปีที่แล้ว +1

    Deal with the rust, then use Protecta-kote bedliner paint, I'm a Window cleaner and carry loads of water around , that's what I have in the back of my van and it does the job.

  • @_LuisS
    @_LuisS 2 ปีที่แล้ว +1

    That's the beauty of owning a VAG.
    Parts are nearly all bolt on.
    Those are same calipers as golf R, and therefore also fit the caddy..
    Same would be of you wanted even bigger brakes and fit the VW Phaeton/ Audi A8 calipers.

  • @raiffelwurr3837
    @raiffelwurr3837 ปีที่แล้ว +1

    Almost fully caught up keep the content coming !!

  • @tomm6746
    @tomm6746 2 ปีที่แล้ว +1

    Them wheels need to go 🤮🤮🤮

  • @mamaulanfarhanmolok4282
    @mamaulanfarhanmolok4282 2 ปีที่แล้ว +1

    Great video but hows the 1M clone?

  • @mornestemmet99
    @mornestemmet99 2 ปีที่แล้ว +1

    Mate those 135i wheels would look killa on the van, sorry but the gti wheels looks shit

    • @Chris_Slix
      @Chris_Slix  2 ปีที่แล้ว

      Yeah definitely not my favourite wheels but for what i paid and when i needed a set of tyres they were a no brainer at the time 😄

  • @ashedkins
    @ashedkins 2 ปีที่แล้ว +1

    Spray the back with lizardskin paint! It's tough as old boots and looks great

  • @ollieguyon
    @ollieguyon 2 ปีที่แล้ว +1

    Great video mate. I’m a modified Caddy owner - if you want a multifunction steering wheel to work it will have to be a VW one. Potentially will have to change the slip ring and the clocks too + coding. If you don’t need the buttons to work though any VAG steering wheel is bolt on 👍🏽

  • @dionwilkinson3028
    @dionwilkinson3028 2 ปีที่แล้ว +2

    drove past ur aston this morning outside ur house looks stunning keep up the work man

  • @VWGolfR6285
    @VWGolfR6285 2 ปีที่แล้ว +1

    You should get some black golf r wheels for the caddy and get some new front and back lights

  • @neighboursconstrictors1390
    @neighboursconstrictors1390 หลายเดือนก่อน

    I would love to see a full build series on the Caddy for a shop van now you’ve got the new work unit… there’s loads you can do with them. I’ve got a bit carried away with mine, fully custom with a R32 engine swap

  • @BLCKBOXSimRacing
    @BLCKBOXSimRacing 2 ปีที่แล้ว +1

    @chris slix What year S3 did the brakes come off? They look like S3 8v in the video, but just checking! Thanks

  • @md-detailing
    @md-detailing 2 ปีที่แล้ว +2

    That gen of Caddy is the best looking,most reliable AKA the Diesels and i really love to see them tuned and modified!
    Love the build Chris ;D

    • @Squatch2530
      @Squatch2530 ปีที่แล้ว

      ☝️ᴛʜᴀɴᴋs ғᴏʀ ᴡᴀᴛᴄʜɪɴɢ ʏᴏᴜ'ᴠᴇ ʙᴇᴇɴ sᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴍʏ sʜᴏʀᴛʟɪsᴛᴇᴅ ᴡɪɴɴᴇʀs ʜɪᴛ ᴍᴇ ᴜᴘ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎆 🎉

  • @krzysztofkmiecik7231
    @krzysztofkmiecik7231 ปีที่แล้ว

    Hello.
    What size rims do you have if you fitted brake calipers from Audi S3 ?
    What year was that Audi S3 ?
    What size brake discs was in that Audi S3 ?

  • @joebrown1372
    @joebrown1372 2 ปีที่แล้ว +1

    What year was the s3 that them brakes came from bud?

  • @joao.ferreira25
    @joao.ferreira25 2 ปีที่แล้ว +2

    a mk7 gti wheel would look sick

    • @Squatch2530
      @Squatch2530 ปีที่แล้ว

      ☝️ᴛʜᴀɴᴋs ғᴏʀ ᴡᴀᴛᴄʜɪɴɢ ʏᴏᴜ'ᴠᴇ ʙᴇᴇɴ sᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴍʏ sʜᴏʀᴛʟɪsᴛᴇᴅ ᴡɪɴɴᴇʀs ʜɪᴛ ᴍᴇ ᴜᴘ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎆 🎉

  • @Codsam12117
    @Codsam12117 2 ปีที่แล้ว +3

    Loving this build so far Chris keep smashing it

  • @HarshiLLmusic
    @HarshiLLmusic 2 ปีที่แล้ว +2

    🐐

  • @jasep3525
    @jasep3525 2 ปีที่แล้ว +1

    👍

  • @g__o__l__d__6673
    @g__o__l__d__6673 2 ปีที่แล้ว +1

    2 channels needed on the floor to drain out leaks Hammerite floor

  • @xvxzarehunter3599
    @xvxzarehunter3599 2 ปีที่แล้ว +1

    For the back use the raptorlining stuff, its rugged and chemicals don’t affect it

    • @Squatch2530
      @Squatch2530 ปีที่แล้ว

      ☝️ᴛʜᴀɴᴋs ғᴏʀ ᴡᴀᴛᴄʜɪɴɢ ʏᴏᴜ'ᴠᴇ ʙᴇᴇɴ sᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴍʏ sʜᴏʀᴛʟɪsᴛᴇᴅ ᴡɪɴɴᴇʀs ʜɪᴛ ᴍᴇ ᴜᴘ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎆 🎉

  • @philipairton5267
    @philipairton5267 2 ปีที่แล้ว +1

    Depending on what your plans are I'd sand the surface rust back protect it then linex the floor 👌 never have issues with water ingress or damage again

    • @Squatch2530
      @Squatch2530 ปีที่แล้ว

      ☝️ᴛʜᴀɴᴋs ғᴏʀ ᴡᴀᴛᴄʜɪɴɢ ʏᴏᴜ'ᴠᴇ ʙᴇᴇɴ sᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴍʏ sʜᴏʀᴛʟɪsᴛᴇᴅ ᴡɪɴɴᴇʀs ʜɪᴛ ᴍᴇ ᴜᴘ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎆 🎉

  • @fabiotallarida4535
    @fabiotallarida4535 5 หลายเดือนก่อน

    What year model Audi s3?

  • @robmcsenior6282
    @robmcsenior6282 2 ปีที่แล้ว +1

    Loving your videos as always mate! My heart tells me that this isn’t the best ‘base van’ to start turning into something cool so don’t let your heart rule your head…or something like that 😂

    • @Chris_Slix
      @Chris_Slix  2 ปีที่แล้ว +2

      Oh this van is definitely had sentimental value, i cant see me getting rid of it for a long time 😂 atleast it makes better videos!

    • @robmcsenior6282
      @robmcsenior6282 2 ปีที่แล้ว

      @@Chris_Slix well I will certainly be watching either way! Really pleased for
      You with everything you’re achieving, I wish I was as brave. You’ll never look back mate

  • @DL-Davide
    @DL-Davide ปีที่แล้ว

    Cheap caddy? When? 😂

  • @stevenhadler9747
    @stevenhadler9747 2 ปีที่แล้ว

    Rs3 engine box and 4x4 system next 😃

    • @Chris_Slix
      @Chris_Slix  2 ปีที่แล้ว

      Jesus ill need a go fund me page 🤣