Thank you for your review! We’re delighted to see you share your experience and provide a detailed analysis of the product’s performance. If you have any questions or need further assistance, please don’t hesitate to reach out to our team. Thank you again for your support!
@@directorjorgelm Well, I have two of these cameras now as well. Both are working just fine by POE. Maybe something wrong with your switch? You can see them working by POE in the video, connected to a Cisco SG300-28p switch. Try to run them with POE injectors... These cameras definitely have POE implemented.
PoE is not PoE... You need to make sure, that the specs meet the requirements (IEEE 802.3af) and that your PoE hardware is able to deliver the correct voltage and wattage... Between 37-57 Volts and 12,95W (better 30W, IEEE 802.3at) per port should be working just fine. Make sure, your network cables support that PoE standard as well. If all does not help, get in touch with Zowietek Support: support@zowietek.com and see what they can do for you.
Thx for the very well made and detailed review. The movement of the cars passing in your video are a bit stuttering. Is this a flaw of this camera?
Thank you for your review! We’re delighted to see you share your experience and provide a detailed analysis of the product’s performance. If you have any questions or need further assistance, please don’t hesitate to reach out to our team. Thank you again for your support!
Thanks for the review ! 😍
Hello, did you use the camera with a PTZ controller? How was the pan tilt control at full zoom? Jerky or smooth? Thanks for any input
Is it necessary to purchase an NDI license to be able to use this feature or does it come pre-activated?
The license is pre-activated on the device. No need for an additional purchase.
what firmware version were you using it with for this review ?
We made an upgrade to the latest version before review, that at this time was v1.0.2.45
@@mediacousticsmultimedia7359 thanks
There is no POE. I have 2 camera and says there POE, but didn't work with POE. Just power supply.
@@directorjorgelm Well, I have two of these cameras now as well. Both are working just fine by POE. Maybe something wrong with your switch? You can see them working by POE in the video, connected to a Cisco SG300-28p switch. Try to run them with POE injectors... These cameras definitely have POE implemented.
@mediacousticsmultimedia7359 I already try it. Nothing happened
PoE is not PoE... You need to make sure, that the specs meet the requirements (IEEE 802.3af) and that your PoE hardware is able to deliver the correct voltage and wattage... Between 37-57 Volts and 12,95W (better 30W, IEEE 802.3at) per port should be working just fine. Make sure, your network cables support that PoE standard as well. If all does not help, get in touch with Zowietek Support: support@zowietek.com and see what they can do for you.