There are three major defects here: 1: at 10:55, the gate is too noisy. major sound come from the roller wheel when it sliding, I think it's because the angle bar a bit under size and the joint at turning area is too sharp, the roller wheel is hitting welding bolt when sliding. Especially compare to the test door at 2:43 which very quite. 2:at 4:25, you can see the top holder of gate, should use double plastic/rubber roller instead of flat holder to reduce noise. 3: at 5:17,the lock at left side only can be lock inside, can't be open outside. that is a bit inconvenient. Especially when family member lock the gate, but other members come back late, have to weak up the family member to open the lock.
Thank you for sharing! I like that this design saves space, You should PATENT DESIGN, it's sounds like pros love it, but will definately STEAL your brilliant idea. You deserve credit for your innovative idea.
Very impressive work. I had a similar idea but the rail would be below the surface of the drive. What stopped me was the debris that may have collected in it causing problems.
Great video by the way ! Does the ground have to be level on both ‘axis’ ? I hope that makes sense… I think yes ? Can there be any little tolerance on differences ?
Hello, we're grateful for the helpful guidance provided in your video on building a curved automated gate, and we've successfully sourced the necessary materials such as rollers and round bar. However, we've encountered an issue with our automated sliding gate where the end of the gate is lifting and causing the foot rollers to derail. We've attempted to troubleshoot the problem ourselves, but so far, we've been unsuccessful in identifying the root cause. We'd appreciate any suggestions or solutions you can provide to help us fix this issue. Thank you for your time and assistance.
Hello! I wanted to provide an update on our progress. We were able to identify and resolve the issues with our gate thanks to your helpful TH-cam video. Firstly, we noticed that the fixed end of the gate was much lighter compared to the 5 connecting curving gates. To address this, we added more tubular and plain sheet material to balance out the weight. Additionally, we added two more roller wheels to the fixed end of the gate for better stability. We're thrilled to report that these modifications have successfully resolved the issues we were experiencing. One important lesson we learned is the importance of following the design and weight specifications for the gate. In our case, the combination of tubular and plain sheet material made our gate heavier than expected, but we inadvertently copied the same design for the fixed end of the gate which made it much lighter than the others. Thank you again for your help, and we're grateful for the valuable knowledge we gained from this experience. I uploaded a short video so you can visualize :)
I am on a corner across from a park and want the option of moving 60 ft of fence by automatic switch. and the returning it for security at night. What would that cost in dollars fully installed?
Swivel wheel will be damaged in less than 1 year, then have to replace all at once coz other wheels are failing too. Derailment is a headache. Nice design but obviously not sustainable. I regret with mine, which is a half folding gate only.
Impressive, ideal for small spaces !!!! Lovely if a parts/ fittings listing was included !!!
Dr-b
@@reynaldodeguzman4480 A
@@reynaldodeguzman4480y 4 2 at yu 8
Thank you sir for the knowledge about tutorial gate i like...super..
From indonesia.
Pekerjaan yg punya skill kreatif yg bisa membuat seperti ini semoga sukses bos'Ku
so fearless
crocs and sunglasses against hot welding.
my guy :0
excellent job but what stops the top from been unstable thanks top job
Deatils, specs of all materials used please...
Very innovative!!!
Salute!
Muchas gracias por compartir su experiencia en éste trabajo espectacular.
Felicitaciones!
There are three major defects here:
1: at 10:55, the gate is too noisy. major sound come from the roller wheel when it sliding, I think it's because the angle bar a bit under size and the joint at turning area is too sharp, the roller wheel is hitting welding bolt when sliding. Especially compare to the test door at 2:43 which very quite.
2:at 4:25, you can see the top holder of gate, should use double plastic/rubber roller instead of flat holder to reduce noise.
3: at 5:17,the lock at left side only can be lock inside, can't be open outside. that is a bit inconvenient. Especially when family member lock the gate, but other members come back late, have to weak up the family member to open the lock.
Excellently shown step by step.
Thanx
BRILLIANT.....!!! GREAT IDEA & EXECUTION.....THANKS FOR SHARING
Thank you for the this I learned from you, am also a welder thank you 🙏
What exactly did you learn? How to fuck up your eyes and increase your likelyhood of protracting skin cancer???
I'm a welder too and that's ALL i saw!
Beautiful Gate!
Wow wonderful work.
Thank you for sharing! I like that this design saves space, You should PATENT DESIGN, it's sounds like pros love it, but will definately STEAL your brilliant idea. You deserve credit for your innovative idea.
It's hardly unique or original mate
Very impressive work. I had a similar idea but the rail would be below the surface of the drive. What stopped me was the debris that may have collected in it causing problems.
This is also my problem. If we make it on the road surface, I think there'll be another problem such as bending, etc.
Do you have the solution?
Great idea!! Good job👏🏽 can you share a link for where to buy that type of hinges and wheels? Thanks for your help!
น่าจะมีปัญหาเรื่องน้ำขังหน่อยนึง เพราะรางสูงกว่ากระเบื้อง
Good idea...one question : how to make the top of gate to stable? Is possible to down when it push by child or someone?
Great design and supper skill..
Napaka bangis 👊👊👊👏👏👏
So elegant nice 👌 gate
Bravo good job well done
Thanks mr....👍👍👍
If in case
ya gir gya to
because uper position per koi supports to nhi hai
Great design
Nice 👍🏻
A material list would of been nice, also where did you get the gate hinge??
looks like garage door hinges, the more important question is where to get wheels with a castor bearings
Very....very good..
lOVE this gate system & would like to have design diagrams
th-cam.com/video/yhMs-OrUjfU/w-d-xo.html&lc=Ugz_3CA_9DYQTxhVmO54AaABAg
Good day sir, how much will it cost to construct and install?
Regards
Genius idea
Great design and skills very impressive where can you purchase the rollers and hinges please ...
Great video by the way !
Does the ground have to be level on both ‘axis’ ? I hope that makes sense… I think yes ? Can there be any little tolerance on differences ?
Leveling is crucial.
what type of hinges did you use, thanks in advance
^
th-cam.com/video/kUXuLZO7I5c/w-d-xo.html
Hello, we're grateful for the helpful guidance provided in your video on building a curved automated gate, and we've successfully sourced the necessary materials such as rollers and round bar. However, we've encountered an issue with our automated sliding gate where the end of the gate is lifting and causing the foot rollers to derail. We've attempted to troubleshoot the problem ourselves, but so far, we've been unsuccessful in identifying the root cause. We'd appreciate any suggestions or solutions you can provide to help us fix this issue. Thank you for your time and assistance.
Hello, can you please shoot a video for me to see? Please make sure to shoot it in detail.
@@yu3320 ok, thank you. I'll create a video in detail
Hello! I wanted to provide an update on our progress. We were able to identify and resolve the issues with our gate thanks to your helpful TH-cam video.
Firstly, we noticed that the fixed end of the gate was much lighter compared to the 5 connecting curving gates. To address this, we added more tubular and plain sheet material to balance out the weight. Additionally, we added two more roller wheels to the fixed end of the gate for better stability.
We're thrilled to report that these modifications have successfully resolved the issues we were experiencing. One important lesson we learned is the importance of following the design and weight specifications for the gate. In our case, the combination of tubular and plain sheet material made our gate heavier than expected, but we inadvertently copied the same design for the fixed end of the gate which made it much lighter than the others.
Thank you again for your help, and we're grateful for the valuable knowledge we gained from this experience.
I uploaded a short video so you can visualize :)
Las ruedas son fijas?
Hi. I’m just want to know what city you’re live in because I need someone to install my sliding gate opener too. Can you let me know please thank you
thank you for the idea
is that 13mm x 76mm panel
I am on a corner across from a park and want the option of moving 60 ft of fence by automatic switch. and the returning it for security at night. What would that cost in dollars fully installed?
9870636105
How best to install the anthenna wires on the motor
Wish they have same quality work here at Philippines..
I like this kind of gate👍
Very good . May i use your video to explain to customer ?
Awesome idea
Nice design
Swivel wheel will be damaged in less than 1 year, then have to replace all at once coz other wheels are failing too. Derailment is a headache. Nice design but obviously not sustainable. I regret with mine, which is a half folding gate only.
Hi i have issue roller derail , any sugguestion?
exelent work 👌.Regards from 🇵🇱
how can it stand on its own?
Brpe kos semua buat pagar x termasuk autogate mtor?
What is the minimum size of last door can do.sir? For example carport is only 4M x 3M (9'x12') thanks in advance
Amazing
Estoy en República Dominicana. Necesito comprar las ruedas para construir mi portón
Todo bien pero ocupen mascara de soldar
Solid boss
Nice. In the UK that would be a £20,000 install any day.
whattt !? what an expensive 😱
in Ina about Idr 15/25 million or £1000/1500
From which city ?
Dear Friend Could you please tell me what exactly the Overlap should be maintain
How to fit motore rock in gate pls tell me
LOL, if not locked at the end, you can simply lift it off the rails and push it inwards. Gate will fold a little and bracket will not hold it...
What type of material Used in this
Gate
is that wood for black panels or plastic
Aluminum
@@yu3320 thank you
30 feet me ho sakta he kya
If we give the measurements of our gate u can give me the details of each block
Can you supply the material with motor
Very good Bt one question that why one rack patti is not touching second
At the time of moving on radias
how much this kos??where are you operate? how to contact?
What is the lenght and width of every panel? And why is the last panel is bigger?
Work ..without PPE ?
impressive , Ideal good
Nice
Do you have a location and website.
How to get the wheels and what is the cost for such size slide folding gate. Without motor.
Nice, would be more help if materials were included
Bagus..ngemeng2 bengkel mana yaaa
How much cost that gate
Daerah mna ini
good job
Good day . Can i buy one of those gate . can you ship?
Model engselnya kaya apa si
can you explain the track bending in details, what is the dimension ?
th-cam.com/video/yhMs-OrUjfU/w-d-xo.html
How much is the Quote for witdh 570 cm and hieght 235 cm please provide me the price labor & material
Cool
Would you please tell me how to calculate the track corner!!
th-cam.com/video/yhMs-OrUjfU/w-d-xo.html
@@yu3320 there is 2 part of my gate, each size is 6.6 feet.so what should be the track corner radius?
@@anikhs5405 3'
how long is the fence box distance ??
th-cam.com/video/yhMs-OrUjfU/w-d-xo.html
Area in Dasmarinas Cavite i need the total amount Labor & Materials am interested
There are lots of style in automatic gate close/open, however, money is very important.
Boss size kya he gate ki
Sir anong mga materyales ang gamit nyo po? at magkano po ba ang budget nito?
Stainless materials pls quote
I like that one, how much for installation here in Cainta Rizal
Awesome
What name this moter?
maybe much better if the rollers are imbedded on the ground
Parang sa mall tol hehe
Very impressive. Where we can get these type of motor.
I have a automatic motor
@@bishalthapa208 where are you located?
Bhaisepati lalitpur
What is the price
What if rocks get underneath those wheels any issues
You can get 4wd versions 👍🏻
what type of hinge was used? can you share pls @yu3320?
th-cam.com/video/kUXuLZO7I5c/w-d-xo.html
Do you ship to the United Stated?
How I contact you?
Is there anyone installing this in Dallas, Texas USA?
Where
please tell me: 3'= how many meters?
3 feet = 0.914 meter. (Around 1 meter)
1 meter = 3.28084 feet
@@yu3320 Thank you so much. I really appreciate your technique and skills.