fix or repair low pressure washer clogged nozzle

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ม.ค. 2025

ความคิดเห็น • 37

  • @collincastaneda5701
    @collincastaneda5701 3 หลายเดือนก่อน +1

    Your video was the only only I found online which matched my nozzle perfectly. Easy to follow steps and it worked like a charm! Of course now I have more work to do around the house.

  • @nestorph21
    @nestorph21 ปีที่แล้ว

    This youtube was a godsend. Saved me $80 as I was about to buy a new pump based on another youtube tutorial. Thanks!!

  • @shamalprahith3731
    @shamalprahith3731 7 หลายเดือนก่อน

    Thanks alot... I saved $80 as I was about to call a technician.❤

  • @cdparisi
    @cdparisi 2 ปีที่แล้ว +3

    This was exactly what I needed to unclog the nozzle of an Excell powerwasher that I found on the curb. Now that I did this and cleaned the carb and replaced the carb needle (which only cost a few dollars) I should be good to go. THANK YOU!

  • @davidvelazquez9132
    @davidvelazquez9132 4 ปีที่แล้ว

    Went out this morning to wash our fascia before hanging Christmas lights and was only getting water on "low pressure." A quick google search lead me to this video and I was able to disassemble, clean, and reassemble. Saved me a lot of time, frustration, and if I just gave up, money at the local hardware store to replace the nozzle/wand. Many thanks for well made video.

  • @jimleary1275
    @jimleary1275 2 ปีที่แล้ว

    Perfect, clear explanation of exactly how to solve the problem I was experiencing.
    Leave the power washer in the shed, unloved for a few years and this is what you’ll have to contend with.

  • @jimrogers4655
    @jimrogers4655 3 ปีที่แล้ว +2

    Thank you for posting this! Spent hours trying to fix what I suspected was a clogged nozzle but couldn’t figure out how to get the nozzle out. Even though your nozzle assembly is not the same as mine, the nozzle itself came out exactly how you demonstrated. Very helpful video.

  • @timthetoolman4575
    @timthetoolman4575 ปีที่แล้ว

    Thanks for the great video. I had an extra wand that had sat for 5+ years and the high pressure jet was plugged TIGHT. I soaked it in my ultrasonic cleaner and still plugged. Took it apart as you did and then able to clean the jet manually. It was plugged so tight I could not get the supplied cleaner wire through it. I ended up using a set of micro drill bits I had on hand that I use to drill out brass gas and air jets in small engines. Pushed a big chunk out of the jet and it works great now! I was about to toss it in the trash. THANKS!

  • @katzkatcher
    @katzkatcher 3 ปีที่แล้ว

    I agree with Seaside garden . You saved me a bunch of $ . I took the whole yellow sprayer end off and its been soaking in vinegar for 24 hrs now. Now i can take it apart and lube all the parts that need it & i can get busy cleaning this porch that my wife wanted done yesterday .Thanks for the video !

  • @tedtolentino4955
    @tedtolentino4955 3 ปีที่แล้ว +1

    Thank you, that was very clear how to service these older wands, which is what my problem is. Knowing how to disassemble the wand was my biggest challenge since there are no readily available instructions. So, thank you for taking the time to share your video. keep up the good work!

  • @charleskeoleian9598
    @charleskeoleian9598 4 ปีที่แล้ว

    Fantastic DIY video. Disassembled, cleaned out impacted sand in tiny nozzle, and reassembled. Your video saved me time and money. Much appreciated.

  • @skijwr
    @skijwr 4 ปีที่แล้ว

    You sir are a genius. My nozzle was completely blocked. You saved me some headache time. You made it very easy for me to fix mine. I'm back to like new machine with full wand pressure. Thank you.

  • @gerardi2000
    @gerardi2000 ปีที่แล้ว

    I really like your video. This should be helpful in fixing my wand. Your presentation was entertaining as well. I am now a subscriber.

  • @elainebalogh2447
    @elainebalogh2447 3 ปีที่แล้ว

    I found this very helpful...I actually used this to repair the nozzle on my Devilbis model EXVR4B2321...

  • @gman8260
    @gman8260 4 ปีที่แล้ว

    Awesome. I had no idea how to get this nozzle apart, but you video showed how to do it step by step. I couldn't find a "pokey bit" in my tool box, so I used a screwdriver!!!

  • @williamgentile997
    @williamgentile997 2 ปีที่แล้ว

    Great video, "simple" repair if you know what to do!!! Thx much!!!

  • @MisterInjector
    @MisterInjector 11 หลายเดือนก่อน

    Thankyou! This is what I have been looking for.

  • @martinhall6189
    @martinhall6189 4 ปีที่แล้ว

    Very complete video. I have this same nozzle and needed the complete tear down.

  • @acleon2004
    @acleon2004 4 ปีที่แล้ว

    Thank you for this video, your pace and explanation was dead on. You saved me the hassel of heading to the shop! I liked and subscribed

  • @hughesurdaddy1968
    @hughesurdaddy1968 3 ปีที่แล้ว

    This was a very informative video. A+
    The best tip was the last 20seconds for me.. how to test!

  • @carls8286
    @carls8286 3 ปีที่แล้ว

    I think you just saved my pressure washer, many thanks! :)

  • @brianhudson818
    @brianhudson818 ปีที่แล้ว

    Thank you! This really helped me out.

  • @howardlovecraft750
    @howardlovecraft750 4 ปีที่แล้ว +1

    Once you own a pressure washer you quickly realize just how handy they really are.

  • @thedude5295
    @thedude5295 4 ปีที่แล้ว

    I'm going to try this on a pressure washer somebody gave me a few years back that looks nothing at all like the B&S Brute. Hope it works, because this thing is such a beast it should everything down to the bone if you accidentally pointed it at somebody and I'd hate to have to buy a Sun Joe if I can't get it working.

  • @spicky2966
    @spicky2966 2 ปีที่แล้ว

    well done chief tks -not getting a proper fan stream of water probably nozzle needs cleaning..

  • @Potatoroomr
    @Potatoroomr 4 ปีที่แล้ว

    THANK YOU!!!!!!! THIS IS ALL I WANTED SEARCHED FOR HOURS

  • @prabathkumar7831
    @prabathkumar7831 4 ปีที่แล้ว

    Great video .It helped to clean the nozzle. Thank you

  • @eliashernandez9120
    @eliashernandez9120 3 ปีที่แล้ว

    Thank you! Sport on. Exactly what i needed!

  • @markli6835
    @markli6835 3 ปีที่แล้ว

    Exactly what I need! Thanks!

  • @JHOOPBASKETBALLJophCleopas
    @JHOOPBASKETBALLJophCleopas 3 ปีที่แล้ว

    I fixed mine using a home needle. No need to disassemble

  • @johnpier3026
    @johnpier3026 4 ปีที่แล้ว

    Thank you!!! Great help!

  • @liquidsnake8101
    @liquidsnake8101 3 ปีที่แล้ว

    Worked! thanks

  • @dn41287
    @dn41287 4 ปีที่แล้ว

    Thanks I didnt realize that set screw was a noozle the hole is plugged up easy fix

  • @juanayala3767
    @juanayala3767 4 ปีที่แล้ว

    Thanks so much mind was stuck this helped me so!!!!

  • @macg5607
    @macg5607 5 ปีที่แล้ว

    great video man thank you!

  • @Riksession
    @Riksession 4 ปีที่แล้ว

    Thank you! Much helpful