It was okay. About what you would expect from a wireless receiver like this. You're not getting top-of-the-line performance, you're getting function and that's about it.
It does work also when plug in to Audio mixer headphone jack then connected to wireless headphones? For live streaming singing live.? Using karaoke also via yt play on my iPad, and connect to Blutooth. I need my wireless Headphone to connect with AirFly Pro. Any opinion thank you . Watching from Germany 🇩🇪
Thanks for the sharing! I am thinking about plug the Airfly Pro to my overhead projector, and wanna ask about the following: 1. Does it keep functioning when charging power? 2. With tx mode, is there time lag between image (from projector) and sound (in Bluetooth headphones)? 3. If my Bluetooth earphone is connected to other devices, how to switch the connection to Airfly? Do I have to press buttons on Airfly to do that every time? 4.If two pairs of earphones are connected to one Airfly pro, can the sound volume of each pair of earphone can be adjusted separately? 5.If the Airfly pro has already paired with two headphones, and I want to pair another one (to replace an existing one), how to do that? And which one of the two is to be replaced? Thanks!
I have 1 question please..if i connect this airfly with my controller numark ...can i used it to connect with my earphone beats apple to listen my track..??
I purchased this and it did work but it was not loud. It worked as well as a cheaper bluetooth transmitter/receiver I have that only cost me about $12. So I am returning them. Apple Store was selling this for $58.
I bought this since I fly overseas - would have been great if it worked- but only one side worked. Despite my best efforts and research I couldn’t get them to both work. 😐
Airliners use proprietary connectors so you have to use a dongle that they sell in the plane for a lot of money. In most planes there is a second jack for the other channel and if it is a single jack the spacing is different so a normal jack is to long. So you either need to get the adapter (which is included in the deluxe kit) or wiggle around with the normal plug (back and forth) until you get a “dual mono” signal out of em.
@@Gren4te 🤔 thanks for the info. Seems like they would have accounted for that. Regardless- I don’t have it anymore - tossed it in the trash where it belongs. 🫤
@@polloloci21 too bad man. For next time: the flight attendants know what will work. Most planes use the dual mono adapter. Works for normal wired headphones as well
Cool tech,Btw Alex whats your thoughts on the new Iphone series. I am eagerly waiting for a video where you share your options regarding the apple event which took place on 14/9/2021. Also cool video mate love from India🙌🏻🙌🏻.
Bluetooth wireless will always have a slight delay because of the technology. That's why I always used wired headphones on my laptop, especially when editing video, the delay will drive you crazy if doing any kind of audio work.
how was the latency?
It was okay. About what you would expect from a wireless receiver like this. You're not getting top-of-the-line performance, you're getting function and that's about it.
It does work also when plug in to Audio mixer headphone jack then connected to wireless headphones? For live streaming singing live.? Using karaoke also via yt play on my iPad, and connect to Blutooth. I need my wireless Headphone to connect with AirFly Pro. Any opinion thank you . Watching from Germany 🇩🇪
Thanks for the sharing! I am thinking about plug the Airfly Pro to my overhead projector, and wanna ask about the following:
1. Does it keep functioning when charging power?
2. With tx mode, is there time lag between image (from projector) and sound (in Bluetooth headphones)?
3. If my Bluetooth earphone is connected to other devices, how to switch the connection to Airfly? Do I have to press buttons on Airfly to do that every time?
4.If two pairs of earphones are connected to one Airfly pro, can the sound volume of each pair of earphone can be adjusted separately?
5.If the Airfly pro has already paired with two headphones, and I want to pair another one (to replace an existing one), how to do that? And which one of the two is to be replaced?
Thanks!
I have 1 question please..if i connect this airfly with my controller numark ...can i used it to connect with my earphone beats apple to listen my track..??
So I have a scanner I use at nascar races and it doesn't have Bluetooth. This would allow me to use Bluetooth earbuds with it correct?
Correct
Sorry about the late question- I’ve seen a lot of comments about a delay, how bad is it? I’d think it would basically unnoticeable but apparently not?
I think it depends on how you’re using them. I didn’t notice too much of a delay when I tried them out.
i’m your 900 subscriber congrats.
you deserve it. and i really enjoy your videos.
Thanks so much!
You can plug it into your recording device but you need a 3.5 trs female to trrs 3.5 male adapter.
is the noise cancellation still working after pair to 'AirFlyPro' ?
Not positive. I don’t have headphones that do this so I wasn’t able to test it out.
@@AlexVassiosOfficial thanks Alex 🙂
Oh so it works with my pc too how much does it cost
Check the links in the description for places to buy.
U think this would work for monitors and Bluetooth speakers
It should
I purchased this and it did work but it was not loud. It worked as well as a cheaper bluetooth transmitter/receiver I have that only cost me about $12. So I am returning them. Apple Store was selling this for $58.
Yeah I don't blame you. I don't think it's meant to deliver a premium experience, just bridge the connectivity gap
They work well in car with an amplifier and ipad
Does it work if you connect usb c wired headphones to it?
Not sure I understand the question. This is designed to connect to wireless headphones
I have a problem with the apple airpods pro
Hi. What about latency? Thank you.
I was surprised that latency wasn’t all that bad with these. About the same as being connected natively to a device.
Or I should say, about what you would expect from a Bluetooth device.
@@AlexVassiosOfficial Thank you. I'll get it.
I bought this since I fly overseas - would have been great if it worked- but only one side worked. Despite my best efforts and research I couldn’t get them to both work. 😐
Weird!
Same experience for me!
Airliners use proprietary connectors so you have to use a dongle that they sell in the plane for a lot of money. In most planes there is a second jack for the other channel and if it is a single jack the spacing is different so a normal jack is to long. So you either need to get the adapter (which is included in the deluxe kit) or wiggle around with the normal plug (back and forth) until you get a “dual mono” signal out of em.
@@Gren4te 🤔 thanks for the info. Seems like they would have accounted for that. Regardless- I don’t have it anymore - tossed it in the trash where it belongs. 🫤
@@polloloci21 too bad man. For next time: the flight attendants know what will work. Most planes use the dual mono adapter. Works for normal wired headphones as well
diddent here nothing about latency delay
Cool tech,Btw Alex whats your thoughts on the new Iphone series. I am eagerly waiting for a video where you share your options regarding the apple event which took place on 14/9/2021. Also cool video mate love from India🙌🏻🙌🏻.
Thanks for watching! I'll be sharing a video soon with my thoughts. Stay tuned!
Then why so delayed
Connect with my audio interface 😢
Bluetooth wireless will always have a slight delay because of the technology. That's why I always used wired headphones on my laptop, especially when editing video, the delay will drive you crazy if doing any kind of audio work.
It’s 2021 what’s not Bluetooth now.
Airline entertainment systems still use the 3.5 mm plug, even on 787's and A350's.
A guitar amp
Lots of things. I could see using this for a car stereo system that only has an Aux in.
Just try for audio interface and connect airpods
Why so delayed 😢😢😢so disappointed
It’s wireless. You give up performance for convenience.