Young Martin's Reels -- Shimano FX4000 -- Service and Lubrication
ฝัง
- เผยแพร่เมื่อ 2 ก.ย. 2022
- In this video we disassemble, clean, lubricate and reassemble a Shimano FX4000 spinning reel.
If you like the video, please hit the like button and if you would like to see more of them, please hit the subscribe button. Young Martin’s Reels was created to honor my dad Martin B. Stivers of Louisville KY. He was an avid fisherman and repaired thousands of fishing reels in his lifetime. I spent numerous hours watching him do so, but I have forgotten most of what he taught me. Now that he is gone, and I find myself in need of reel repair, so I am learning how it is done and trying my best to pass it on.
If I can be of assistance, feel free to contact me Rick48cj2a@yahoo.com
I would also like to thank Dennis Kuntz of 2nd Chance Tackle. His videos have helped to fill in the gaps in my “reel” knowledge. Without his TH-cam videos I’m afraid Young Martin’s Reels would not exist.
Rick Martin Stivers
So many of my fishing friends are afraid to open up their reels to do maintenance. That was a good idea to give Michael some hands on experience. It's a great confidence builder!
When I lost my Dad a year and a half ago I didn’t know much of anything about fishing reels. Fortunately I had Dennis at 2nd Chance Tackle to teach me. His videos allowed me to get my hands dirty and start the learning process. Michael is a very smart guy and picks things up quickly. His mechanical skills are currently limited due to not having experienced much in that realm. Since I’ve met him we have pulled tree stumps, split wood, changed a water pump, removed and installed a transmission and now serviced a fishing reel. He’s learning. I think he’s going to make a pretty good fisherman to. He picks up on minor details and uses them to his benefit. I have no doubt he could pick up that reel today and go through it with confidence.
Michael you did a great job. I am sure we will be seeing you do some more reels later.
I hope he decides it’s something he would like to do more often.
Exactly what I needed thx alot
I’m glad I was able to be helpful.
i have the same reel, and it doesnt make sound when drill is working but drill works. what could be a problem?
Gracias amigo 😃😊😃😊😃😊 mucha ayuda
Do you have a video on how to actually clean all the parts before re assembly? I notice you skip that part, but it could be valuable information for your viewers.
Mike, a lot of my early videos showed some of the cleaning but it became monotonous for people watching so I dropped it out. I’ll try to include it in some of my upcoming videos of reels that are really dirty.
Hey so I took the drag off my reel and I can’t put it back on could you make a video explaining if I did something wrong thanks
Santiago, I’m away from home for a while so I can’t make the requested video for a week or more. You are in luck because I still have access to that reel. Usually I pass them on when I get done with them. If you haven’t seen an explanation video in the next two weeks, post this request again so that I don’t forget. Since you will have to wait a while for me to make the video, I suggest you place all of the parts and reel into a ziplock bag and seal it up so no parts get lost.
Santiago, I got home and made the video to show you how to install the drag system. You can view the video here.
th-cam.com/video/FaRBNkashD8/w-d-xo.html
You know where I can get a drag knob replacement it’s similar to his I have the fx2000
Unfortunately, not at this time. The correct part number for the FX2000 rear drag knob is RD4098. Nobody is currently listing this knob for sale. The only other option is to purchase a parts reel.
@@youngmartinsreels5314 dang ok
Great video, it helped me get to and fix the anti reverse.
What grease and oil do you use???
Peter, I use Penn, Cal’s and Super lube greases. For my videos I use the Super Lube because it’s easier to see the parts. For oil I use Penn Reel oil because it seems to work fine and it’s less expensive than others.
My anti reverse doesnt seem to work right away. It takes a few turns before it locks. Have you had that problem?
Most likely cause will be old grease or dirt on the inside of the anti reverse arm. Starting at around the 9 minute point in the video the anti reverse arm becomes visible. I you spray the arm with WD40 and work it back and forth it should free up. Keep spraying and moving the arm until it does. I didn’t remove that part in the video so if you do have to remove it to get it moving, make sure you use you phone to record it from all angles first so you can see how it goes back together. Once you get it moving to the point it springs back into place, at a little drop of oil around the screw head and under the arm. After that it should stay working great for many years.
@@youngmartinsreels5314 I recently just got this reel, like 2 mos ago. It's a 1000 series. After I caught this 2kilo Milkfish the problem happened. It doesn't lock after a half turn. It takes like 3-5 turns back to lock. I'll try spraying wd40. Thank you for replying
Rick, interesting approach to doing a reel service video. I missed this but what is your relationship to Michael? Is he going to be your protege? I guess I understand now that you said this was Michael’s reel. This is exactly how I taught two of my grandkids how to service your average spinning reel. I’m hoping you’ll receive that package from me sooner than later but with Labor Day it will probably be later. Have you tried to find a schematic for a DQ Automatic 268? I have to admit I rather enjoyed this as it was pretty funny at times. I mean no disparagement on young Michael but going forward I’d prefer seeing and hearing you. Maybe Michael can start his own TH-cam channel. I did enjoy watching him fight those monster redfish though! LOL - Chris
Chris, Michael is my oldest daughter’s fiancé. I’m thinking he’s going to be around for a long time. This isn’t the first time I’ve used this format. I used it for my transfer case rebuild videos. th-cam.com/video/3-2TgW2hE_w/w-d-xo.html
@@youngmartinsreels5314 Rick, I don’t think I’ve ever asked you about your family. How many children do you have? I have two daughters but no sons. I did get two good son-in-laws though as well as 6 grandchildren. Has your daughter and Michael set the date yet? I had the honor of performing both my daughters’ wedding ceremony - one in the church I was serving and the other on Ocean Isle Beach, NC. It was not easy to give your daughter away in marriage! - Chris
Chris, I’ll respond to your questions in a private email. Looking forward to seeing the 268. So far I don’t have a schematic for it.
@@youngmartinsreels5314 I found a schematic once but I don’t know where I put it. I’ll look in my files for it if I do I’ll do a screenshot and e-mail it to you.. - Chris
Soon he'll be ready to tackle a level winding reel. I have a Pflueger rocket he can take a look at .lol
I’m thinking more along the line of a Johnson spincast. I don’t want to scare him off.
I did a teardown/detail clean/lube of my Pflueger Rocket 1355 last year. Came away with an appreciation of the build quality of that shiny reel.