This was extremely helpful. There is nothing more irritating than a shaking camera 10 miles away from the action, with someone saying "put this here." Put what where?! All I see are hands moving. Ha ha. The zoom was sharp, detailed, and on target. Bravo.
"I learned more from this video…” is right! You saved me lots of time (money, wire, pins frustration, worry about the quality of my work…) Thanks very much!
Thanks! I am attempting to put a new connector on my continental circuit cabinet, but was confused by the braided wire that were in with the ground terminal. Guess they aren't really needed
@@MikesArcadeMonitorRepair the current one goes red in 1. Green in 2. Black in 3. Brown in 4. Then white in 10. Is that OK? The monitor and colors look fine
Good, helpful vid, one thought I would add. Probably universal, but my crimper die has a little step in it for the fatter insulation end of the terminal, thus the terminal only correctly loads in the die one way. Something to look for.
Well done vid!!!! One of the few people people that know how to teach. Very helpful. Very informative. Much appreciated sharing your knowledge. Thank you.
@@MikesArcadeMonitorRepair The part that crimps the connector to the cable. Looks like they're attached with some bolts so I am wondering if I can just buy those things and put them on my tool instead of buying an entirely new tool
This was extremely helpful. There is nothing more irritating than a shaking camera 10 miles away from the action, with someone saying "put this here." Put what where?! All I see are hands moving. Ha ha. The zoom was sharp, detailed, and on target. Bravo.
Thanks!
I learned more from this video than anything else in the past 4 months of struggling to crimp pins.
Good job. Real good camera and focus. Helpful.
"I learned more from this video…” is right!
You saved me lots of time (money, wire, pins frustration, worry about the quality of my work…) Thanks very much!
I have one of these tools (4Years) and never knew it was for molex pins! Great video!!!
This man taught me everything I know about crimping.
Thanks! I am attempting to put a new connector on my continental circuit cabinet, but was confused by the braided wire that were in with the ground terminal. Guess they aren't really needed
You’re welcome!
@@MikesArcadeMonitorRepair the current one goes red in 1. Green in 2. Black in 3. Brown in 4. Then white in 10. Is that OK? The monitor and colors look fine
The molex just needs to be replaced because it seems like it's worn out. Or the pins are worn
If the image looks normal, I’d say you’re fine.
Good, helpful vid, one thought I would add. Probably universal, but my crimper die has a little step in it for the fatter insulation end of the terminal, thus the terminal only correctly loads in the die one way. Something to look for.
Well done vid!!!! One of the few people people that know how to teach. Very helpful. Very informative. Much appreciated sharing your knowledge. Thank you.
Perfect timing - just needed to do this to a bunch of yoke connectors
Thank you for showing us how. Neatness counts!
Dude like every one of your videos is super helpful! Thanks.
Best tutorial I’ve ever seen on crimping! Thanks, Mike!
What he said….squared. Ty
Nice tutorial! After getting a crimping tool I said goodbye to pliers 😎
I have to connect a 72 volt 50 amp e scooter motor controller, this video was very helpful
So if I was making a custom wire from rca to molex, should I just chop the shield/ground off of the wire when I crimp the molex end?
Not sure I understand. You want to terminate the ground at each end.
Good video. Have you ever used a Molex HTR 2445A crimper? Do you know what it is used for? Thanks.
Flippin awesome tutorial sir !
I always just solder them then crimp them down with plyers. I don't have one of those molex crimpers.
I now have molex crimpers thanks to this video.
Thanks for the awesome and informative videos! Quick question, what is the correct plastic molex connector to use on these?
Check the video description.
Thanks big guy! Will theese work for mk kick harness? Meaning the plastic part and the steel clips
where can i get that crimper
Get outta here medusa lol. Do you know where I can find those brackets for the crimp tool? Or what they're called?
Brackets? Can you be more specific?
@@MikesArcadeMonitorRepair The part that crimps the connector to the cable. Looks like they're attached with some bolts so I am wondering if I can just buy those things and put them on my tool instead of buying an entirely new tool
This was helpful! Thank you.
What make model stripper and crimper are you using?
I apologize but I can’t say. I picked up the crimpers at a pinball expo and I got the strippers off the Snap-On truck at work.
Thank you for this!
What specific crimper tool are you using? It looks like a ratcheting type that crimps both parts at once.
Thank you
Correct. I got it from an arcade expo. I’ll have to see if I can find it online and let you know.
Keep 'em coming! Enjoy the videos and learn ALOT! Question: what model soldering iron do you use?
Weller.
This was vary informative, thank you.
if you dont hear a click does it mean anyhing
Very helpful, bless you!
This is great! Simple and straight forward. Thank you! I have anout 60 to do on 2 pairs of 15 pin molex's.
EXCELENTISIMO VIDEO!!!❤❤❤,😎👍
Gracias!
on rge .156 houseing the the connector does not go in easy any help thank john