There is so much I'd like to say about the quality and detail of this vid but really .....FANTASTIC sums it up nicely. Your abilities are truly under rated. Just about to start on the wifes car over here in NZ. Cheers Kevin
Hey Andy , it’ll be a toss between the mini R50 supercharged and Citroen C5 I’m thinking of phasing them both out of the equation soon. Yep I’ve had three new impact. 3/8 low torque. 1/2 drive mid range torque. . 1/2 drive super torque that can apparently flip a mini on its’ roof The new jack is wider and sits very low. Which is great for stability and it has a slow release hydraulic. So the car won’t just come down too fast. I’d say you’re in your early 60’s is that correct
Hi Dread .., still going strong pal ..,, hope you’re keeping well yourself. Just got another camera .., they keep braking ✨✨.., I need one designed by NASA😁
Eine super Anleitung für meinen Swift 1.3 AMT, nun habe ich den Mut es selber zu reparieren. Werkzeug und Hebebühne ist vorhanden. Mach weiter so, das gefällt mit gut👍
Bonjour Kevin,je me suis abonné à ta chaine ,et que dire !! tu es vraiment au top ,le travail que tu fait est vraiment impressionnant et tu gères (sur le bord de la route si on peut dire)+++++++++++++++++++++
whoaa!! Bravo my friend...BRAVO !! even watching the whole video made me tired... i can't imagine the amount of effort and consistency it takes for guys like you to replace the damn clutch : ( BTW, i own a same Swift...and it needs clutch set replacement now : ( ....
So much work involved I was gonna try do my niece's clutch never done one before. But after watching this I might send it to a pro I'd be able to strip it down no problems but put it back together is another story
For a small car , they are a pain in the arse the Suzuki Swift , have done a few of these Kevin , a ridiculous amount of bolts for such a tiny car , not nice to do , saw that leg kicking up there Bud , great video and great camera work as usual , keep up the good work and stay safe 👍😎
Thanks for taking time to leave us a review mike .., really appreciate it. You’re absolutely right there.,, if I can point out., that’s one thing I find a bit annoying with Far East cars .., the amount of small brackets and fixings that are fitted to hold just a small piece of wiring ..,, and to top it all .., the gearbox mount design 😏..,, But it’s all good tho. We love it really us mechanic 😁😁
Too bad you havent checked the rear main seal behind flywheel. Btw also how did you block the engine from spinning when you were torquing the bolts on clutch pressure plate?
Hi, I've not done a fwd clutch before but feeling pretty confident after watching this, thanks! I'm replacing the clutch in a 1.3 Ignis, have you done one? Do you know if there are any differences, aside from the battery tray and a cable clutch?
Awesome video ...... Hi just a question I got my daughters clutch replaced and the clutch pedal is still the same as it was before the replacement clutch kit went in, The pedal takes up about 3/4 of the travel up from the firewall and it starts to grab, and to me that doesn't feel right as it should take up about 2 inches off the ground ..Is the thrust bearing not adjusted properly or something else as the workshop said its correct the way it is ..Well i don't think so cause it another year it would be slipping again as there isn't enough free play to travel on the kit for adjustment ..Thank you
I finally got round to doing the clutch swap last week and got into some positions I never thought possible at my tender age😂. Thank you Kevin for this detailed video, without it I'd have been lost. Anyone else thinking of taking it on there's a lot to do before the clutch housing comes off but follow this step by step video and you too will achieve your goal 😊. Now where did that last bolt go 🔧
During this operation will you also touch the air conditioning compressor??? After the mechanic redid the clutch on this Swift model, I noticed the noisy air conditioning compressor during loading, audible especially in low gears. As soon as I turn off the A/C everything disappears.
Ac compresor is on the other side, no need to touch it for this job. Maybe what you hear is the ac belt tensioner bearing. I change it with every belt change they don't last more.
Great video. Half way through ours so far. My old shoulders arent up to he-man lifting the gearbox back in like you have, but i cant get it to work on the jack either.
Hi Kevin,thinking of doing our Suzuki Liana hatch back.Just wondering about how long did it take you to do the job?.So I have an idea of how much a mechanic would take.And also if i did it im sure it would take 4times longer.Cheers.
Do you have to pay a core charge up front on them clutches first? Then return the old ones for credit back on them. Or do they even want the old ones back..Just wondering as I noticed you set up your work schedule for the week. In advance...
Thanks for the detailed video! Got to do this on my girlfriends Suzuki this weekend on the “driveway”. Good to know I don’t have to move the subframe or anything! How many Nm was the torque on the pressure plate? Three ugga dugga’s and a sinch with a 1/2 inch? Perfect! 👌
Turns out the release fork was seized in its bushings so it was t releasing the clutch properly. Took it out, cleaned it and greased it. Put a new clutch in anyway. Wasn’t bad for on axle stands in the rain.
Hi Kevin! Very good straight to the point video. I was wondering if you remember where you bought the angle attachment for your impact gun and also the clutch plate holder you use?
It's great how you do this and video it all. Only question from me is what about using a torque wrench to correctly torque all the fixings. I don't see you doing this anywhere so how are you managing this?
Hey Kev, I have recently changed my clutch on a Suzuki SX4 1.6 liter petrol, and now when I keep the clutch pedal pressed for a few seconds it hears from the gearbox like a whistle sound. Do you have any idea what's the reason? thanks, and all do respect for your work man❄️❄️❄️❄️
Hey kev have you ever done a clutch on semi automatic 2010 pug 3008 diesel? It's got a normal single clutch. I got one in and the book is telling me to remove the engine.
Don’t let the book boss you around and tell you what to do ... power to the people ..😁✨.. The job of removing the gearbox is the same as the video I have on the channel. Only thing is to re sequence the module after replacement. .. you’ll probably need a little know how on that front ...
Awesome work mate! Thanks for sharing, I’m replacing the clutch in my M16a, first time doing it so see how we go. What was the tool you used when putting the new clutch in, Cheers from New Zealand 🇳🇿
It's called a Laser Universal Alignment tool... Model 2646. About $30.00 US...It works on many models. No need for a Spline tool. That fits only one make or model...
@@WMCS yes, definitely a big improvement! 👍 I said some times ago that I will do it myself but, after I've discovered your TH-cam channel, I realised that will be a mistake 😂.
Great video and looks straight forward to follow. I have to do our swift next week and just wondered how much gear oil did you top up with @51:40 Thanks in advance and keep up the great work 🙂
Kevin thanks for your reply one question i wanted an answer on what was the fluid you drained from below and what quantity did you put back in. Thank you
do you mind telling me what impact gun that is as it seems to do the job lol i had to change the sump on my swift without one and i think its time to invest in one lol
I noticed you didn't get the flywheel machined?? You werent worried about clutch shudder?? Im getting my clutch replaced in a short few days time, same car but im letting the mechanic do it. He said "gotta have the flywheel machined for warranty purpose anyway and he doesnt want the car to experience clutch shudder on take off. He the expert so i just pay for it.
![CAMPปลิ้น | รวม Highlight 2024! PART [1/2]](http://i.ytimg.com/vi/6hnvNnvYloU/mqdefault.jpg)
Going to try this on my own , 65 years old and still doing my own work , what doesn’t kill ya will only make ya stronger, great video,
I just did this today. Thanks to this video there was no hidden issues. Very straightforward thank you!
Very impressive how you do this job on the driveway!
✨🍻🍻
There is so much I'd like to say about the quality and detail of this vid but really .....FANTASTIC sums it up nicely. Your abilities are truly under rated. Just about to start on the wifes car over here in NZ. Cheers Kevin
Hey Andy , it’ll be a toss between the mini R50 supercharged and Citroen C5
I’m thinking of phasing them both out of the equation soon. Yep I’ve had three new impact. 3/8 low torque. 1/2 drive mid range torque. . 1/2 drive super torque that can apparently flip a mini on its’ roof
The new jack is wider and sits very low. Which is great for stability and it has a slow release hydraulic. So the car won’t just come down too fast.
I’d say you’re in your early 60’s is that correct
30:54 he's jacking his arms up with his leg
i like your video no talking , plain works. watching from Philippines
Thanks for the support all the way from the Philippines 🇵🇭...
Another top video as always Kevin! Good to see your still keeping busy!
Hi Dread .., still going strong pal ..,, hope you’re keeping well yourself.
Just got another camera .., they keep braking ✨✨.., I need one designed by NASA😁
Thanks. Much appreciated. All went well. Well detailed video. Thank you
Thank you very much for the kind gesture. It’s been well received and very much appreciated.
Kind Rgds.
Kez.
Eine super Anleitung für meinen Swift 1.3 AMT, nun habe ich den Mut es selber zu reparieren. Werkzeug und Hebebühne ist vorhanden. Mach weiter so, das gefällt mit gut👍
Great to hear from you Dirk🍺 🍻
Bonjour Kevin,je me suis abonné à ta chaine ,et que dire !! tu es vraiment au top ,le travail que tu fait est vraiment impressionnant et tu gères (sur le bord de la route si on peut dire)+++++++++++++++++++++
Bonjour pascal..,, j’espere que vous allez bient..,,
Merci pour la revue... c'est du travail mais ça paie bien...
whoaa!! Bravo my friend...BRAVO !!
even watching the whole video made me tired...
i can't imagine the amount of effort and consistency it takes for guys like you to replace the damn clutch : (
BTW, i own a same Swift...and it needs clutch set replacement now : ( ....
You’ll be tackling your one now you’ve seen how it’s done ✅
اتمنى لك التوفيق والنجاح في كل ما تريد، كل الفديوهات رائعة ولها تصوير دقيق لكل المعطيات...
شكرا جزيلا على كل المعلومات المفيدة
عبدالرحمان من الجزائر
Nice job! How much minimal torque I need with an impact driver?
This video was a God send. Thank you. I had to replace a rusted out subframe too and this gave even better access.
De los mejores videos que he visto en en toda mi vida en TH-cam, Gracias! Saludos desde Perú
i need a new clutch in my swift... whats the cost not including the clutch and where are you based? thanks
So much work involved I was gonna try do my niece's clutch never done one before. But after watching this I might send it to a pro I'd be able to strip it down no problems but put it back together is another story
The work you do is super and it shows sincerity
Thanks for the review.,, much appreciated.,
For a small car , they are a pain in the arse the Suzuki Swift , have done a few of these Kevin , a ridiculous amount of bolts for such a tiny car , not nice to do , saw that leg kicking up there Bud , great video and great camera work as usual , keep up the good work and stay safe 👍😎
Thanks for taking time to leave us a review mike .., really appreciate it.
You’re absolutely right there.,, if I can point out., that’s one thing I find a bit annoying with Far East cars .., the amount of small brackets and fixings that are fitted to hold just a small piece of wiring ..,, and to top it all .., the gearbox mount design 😏..,,
But it’s all good tho. We love it really us mechanic 😁😁
@@WMCS of course we do Kevin 😎😎😎😉😂🤣👍
Too bad you havent checked the rear main seal behind flywheel. Btw also how did you block the engine from spinning when you were torquing the bolts on clutch pressure plate?
Love how he's just doing it 💯💯💯 taking mines out tomorrow
Hope it all goes ok. You’re doing it yourself. 🍻
@@WMCS yeah it's the 2010 suzuki swift sport RS416
Hi, I've not done a fwd clutch before but feeling pretty confident after watching this, thanks!
I'm replacing the clutch in a 1.3 Ignis, have you done one? Do you know if there are any differences, aside from the battery tray and a cable clutch?
Awesome video ......
Hi just a question I got my daughters clutch replaced and the clutch pedal is still the same as it was before the replacement clutch kit went in, The pedal takes up about 3/4 of the travel up from the firewall and it starts to grab, and to me that doesn't feel right as it should take up about 2 inches off the ground ..Is the thrust bearing not adjusted properly or something else as the workshop said its correct the way it is ..Well i don't think so cause it another year it would be slipping again as there isn't enough free play to travel on the kit for adjustment ..Thank you
I finally got round to doing the clutch swap last week and got into some positions I never thought possible at my tender age😂.
Thank you Kevin for this detailed video, without it I'd have been lost.
Anyone else thinking of taking it on there's a lot to do before the clutch housing comes off but follow this step by step video and you too will achieve your goal 😊. Now where did that last bolt go 🔧
Hello what kind of grease fat you use the red oke you did use is on the Volkswagen transporter t5 2.5 tdi nice work you do always
Thank you for this guide. I did my 05 swift today without any problems thanks to this
Excellent.. glad to know the video came in handy
@@WMCS very much so, clutch broke a spring on the drive home Friday, got parts Saturday, fixed Sunday. No need to miss work on Monday
Nice. Is there lot of rust underfloor of thats years Swifts?
For this car, can leaking oil from gearbox cause clutch not to release fully or not engage into first gear?
Most likely a worn pressure plate or clutch cable
During this operation will you also touch the air conditioning compressor???
After the mechanic redid the clutch on this Swift model, I noticed the noisy air conditioning compressor during loading, audible especially in low gears.
As soon as I turn off the A/C everything disappears.
Ac compresor is on the other side, no need to touch it for this job. Maybe what you hear is the ac belt tensioner bearing. I change it with every belt change they don't last more.
Ahhhh my Friends....the n'est mechanics of the Europe.... thanks you for this clip
Salut mon Amis.... Merci bient pour votre compliment..,, j’espere que vous aller bient et en bonne sante....
@@WMCS oui tout va bien pour moi...et toi???
Is that red paste feom the tin lithium grease? Thanks!
Thanks for the video! It’s exactly what I needed to change the clutch in my wife’s car. I’m assuming a wheel alignment is required after this right?
Not required
This is what I was looking for ... Thanks .. Greetings from Poland👍💪💪💪🇵🇱
Excellent DIY Video...Greetings from India..
Greetings to you too. And thanks for Tuning in✨🍻🍻
👍🏽 the clutches warrior 👏
You think the zs32c (2012) 1.6L sport engine is about the same thing? It has a hydraulic clutch.
A TRULY excellent video presentation. Could not be better. Thank you.
Great video. Half way through ours so far.
My old shoulders arent up to he-man lifting the gearbox back in like you have, but i cant get it to work on the jack either.
Made it look easy. The kind of job I think I'll do in no time, then it ends up taking 12 hours over two days...
Le mec est bon il fait ça en presque 1heures les yeux ferm. en tout cas merci cette video m'aide beaucoup pour réaliser la meme operation
Merci beaucoup..
I've got to do my daughters swift soon, all looks straight forward. Thanks for posting.
No probs hope it all goes well.
Why didn't you out grease on the input shaft/release bearing sleeve ?
.
Hi Kevin,thinking of doing our Suzuki Liana hatch back.Just wondering about how long did it take you to do the job?.So I have an idea of how much a mechanic would take.And also if i did it im sure it would take 4times longer.Cheers.
Hey Kevin what fluid did you pump into the bell housing. Am new to clutch replacements.
even with this amazing video, i still wont attempt this,, great job !!
Respect Bro
Üdvözöllek Magyarországról 🇭🇺😉🙋🏻♂️
which degrease you use to clean? it's so good! Thnks
It’s brake cleaner.
Hi I put a new clutch my Suzuki swift it’s hard to get gears only when I pull pedal a few times it goes into gear external slave cylinder give both?
Thanks for the informative step by step vid, just finished one of the same.
also needed flywheel machining
Your video is really helpful and made the job easier. Thanks Kevin
Bonjour tu utilise quelle produit pour le nettoyage de tes pièce continue comme ça pour tes vidéo
merci pour le retour .. ,, il est nettoyant pour freins. ou tout autre solvant similaire fonctionne aussi bien
Did u have to get the flywheel resurfaced?
Do you have to pay a core charge up front on them clutches first? Then return the old ones for credit back on them. Or do they even want the old ones back..Just wondering as I noticed you set up your work schedule for the week. In advance...
Hey Kevin what were some systems that made you realize the clutch needed changing ?
Check my website for clutch symptoms
www.williamsmobileclutch.co.uk
Thanks for the detailed video!
Got to do this on my girlfriends Suzuki this weekend on the “driveway”. Good to know I don’t have to move the subframe or anything! How many Nm was the torque on the pressure plate? Three ugga dugga’s and a sinch with a 1/2 inch? Perfect! 👌
Shit I hope it’s that easy cause her clutch is fucked up! Hope I don’t need a new release fork!
Turns out the release fork was seized in its bushings so it was t releasing the clutch properly. Took it out, cleaned it and greased it. Put a new clutch in anyway. Wasn’t bad for on axle stands in the rain.
Excellent video, helped me lots. Are the exedy clutches any good?
Old swift ka average kiya hy?
Hi Kevin! Very good straight to the point video.
I was wondering if you remember where you bought the angle attachment for your impact gun and also the clutch plate holder you use?
Clutch alignment tool off eBay.
The 3/8 and 1/2 drive increase and reducer are from Sealey.
Ate q enfim saiu video !!!
Hope youre well kev, not been able to watch as many vids as id like too as super busy at work. Keep it up👍
Hi Pete .., always great to hear from you .,, hope you’re keeping well your end.
What is the red grease You are using ?
Hi mate very helpful, did you remove the starter motor, having trouble separating gearbox from engine, any advice cheers
The dowel sometimes gets jammed.
Pry the gearbox with a lever bar.
Cheers kevin
It will come out. I’ve had to sometimes get a flat blade thick screwdriver and hammer it in between to start separating
Cheers Kevin will give it a bang tomorrow lol
Really interesting watching you do that👍 surprised to see that the original clutch was a exedy clutch.
Steven Exedy is normally the original clutch for the Far East cars as far as I’ve noticed .., you did really good spotting that ...
It's great how you do this and video it all. Only question from me is what about using a torque wrench to correctly torque all the fixings. I don't see you doing this anywhere so how are you managing this?
Same reason we don’t sea a grown man still being potty trained or crawling.
At some point he has to stand up.
Hey Kev, I have recently changed my clutch on a Suzuki SX4 1.6 liter petrol, and now when I keep the clutch pedal pressed for a few seconds it hears from the gearbox like a whistle sound. Do you have any idea what's the reason? thanks, and all do respect for your work man❄️❄️❄️❄️
Cool, il faut continuer comme ça 👌😉
J'ai pris pour habitude de remplacer les joints SPY à chaque fois.
Qu'en pensez-vous ?
je pense que c'est une bonne idée de le remplacer
Hey kev have you ever done a clutch on semi automatic 2010 pug 3008 diesel? It's got a normal single clutch. I got one in and the book is telling me to remove the engine.
Don’t let the book boss you around and tell you what to do ... power to the people ..😁✨..
The job of removing the gearbox is the same as the video I have on the channel.
Only thing is to re sequence the module after replacement. .. you’ll probably need a little know how on that front ...
which is best clutch for swift LUK vs Exedy vs sachs ? if price not issue? just need strong reliable clutch and best quality !
I’d definitely go for EXEDY for those engines.. it cost slightly more but will last much longer.
@@WMCS ty
Awesome work mate! Thanks for sharing, I’m replacing the clutch in my M16a, first time doing it so see how we go. What was the tool you used when putting the new clutch in, Cheers from New Zealand 🇳🇿
Was a clutch alignment tool ...
It's called a Laser Universal Alignment tool... Model 2646. About $30.00 US...It works on many models. No need for a Spline tool. That fits only one make or model...
Top man! Thank you for your work!
Thanks for the feedback...✨.., hope you notice the difference now.
@@WMCS yes, definitely a big improvement! 👍 I said some times ago that I will do it myself but, after I've discovered your TH-cam channel, I realised that will be a mistake 😂.
So impressed , what a first rate video.!
Thank you
Great video and looks straight forward to follow. I have to do our swift next week and just wondered how much gear oil did you top up with @51:40 Thanks in advance and keep up the great work 🙂
Kevin thanks for your reply one question i wanted an answer on what was the fluid you drained from below and what quantity did you put back in. Thank you
do you mind telling me what impact gun that is as it seems to do the job lol i had to change the sump on my swift without one and i think its time to invest in one lol
This is the M18 fuel.
@@WMCS cheers mate 👍🏻
Time is real?
Wow, nice work...but I still afraid to it, especially reattached gearbox to the engine...looks very hard to align to fit in.
It’s not too bad.., but I would get an extra pair of hand if I was you. Just to be safe.
Product Japan or Hungary?
Excellent video for DIY mechanics :D
Gracias! Master.pura calidad
Grande maestro.
Desde chile ,
Chileno de corazón, 8_2021
How many hours did the job take ? Now i´m motivated to try this on Swift IV 2013 :)
About 3hrs ..
whats the hardest clutch you've done, like been a real pain to get out etc
Matt I think it’ll have to be Audi A8.. with the driveshaft going through the DMF.
harry w I haven’t..., I suppose some cars will definitely need a ramp. And a Porsche is one of them. I’ll definitely do it on a ramp tho.
bon travail bravo comme toujours
Merci beaucoup..., salut a toi aussi.
What impact are you using?
It’s an M18 Milwaukee Fuel
Hello Kevin,
Nice video as usual. Is there a chance you do a Peugeot 208 in the near future ?
Thanks.
What year is it.? So I can have an idea of what the chances are to catch one.
@@WMCS 2013, 1,2 L, Gasoline. Thanks a lot.
PHILIPPE BESNARD No probs. Give me a couple of weeks I’ll get one up.., in the meantime I have a few Peugeot’s on the channel. Have a little browse
@@WMCS Thanks Kevin, There is no urgency at all. Just a forecast 👍.
Cheers from South of France.
Geiles Video 👍 muss ich diese Woche auch machen gute Anleitung😂👍
great video, very helpful!
Muy bueno tú vídeo abrazo grande desde Tucumán Argentina.
Kiero saber ccomo bajar la caja de un suzuki paso a paso me pueden esplicar por fabor
I noticed you didn't get the flywheel machined??
You werent worried about clutch shudder??
Im getting my clutch replaced in a short few days time, same car
but im letting the mechanic do it.
He said "gotta have the flywheel machined for warranty purpose anyway
and he doesnt want the car to experience clutch shudder on take off.
He the expert so i just pay for it.
I mean we’re talking friction dust against a solid metal surface.
I suppose sometimes we just have to kill the sacred cow and eat it ...
Can you tell what is the miles of this car cause I have the same problem
Wear of the clutch depends only on the skill of the driver! Mine is still original and my Swift is almost140tkm
@@flaviokonti5522 yes my father wear it in 10 k km he is old
Going to do same on 1.3, hope this is the same.
Sin duda un fenómeno,podrías decir referencias del embrague,gracias por tus videos me an servido para hacer embragues,un saludo
Excelent my friend very good video thanks
Raul thanks for visiting the channel. Much appreciated
Excellent video,top technician!
Very nice and detailed video. Thank you bro
The best
Hola amigos me gusta tu video un saludo de madrid ,
Hola stoian..,, saludos amigos.
Thanks for sharing such a useful video
Does anybody know the dimensions of the 2 plugs(filler/drain) for suzuki swift M13a manual trans? Are they M24x1,5 ?
Thank you so much 🙏 great video.
Wow, that's a lot of gearbox bolts close together, guess they couldn't fit in anymore huh? xD
Tell me about it ..,, bolts holding bolts 😂😄