Hi everyone, please watch the whole video para ma-solve yung issues ninyo. then try solving it muna on your end. Checking the analytics of this video, nasa 6 minutes lang ang average viewing time. I created this video to extend help. With the sheer volume ng nagtatanong, medyo mahirap sagutin lahat. In as much as I wanted to accommodate everyone, challenging talaga on my part. try niyo muna gawin as per the instruction sa video. Check the part 2 din at baka dun ang solution sa issue ninyo. Other subscribers can attest how i helped everyone. I still have my office job so pasensya na po kung di ko masasagot lahat.
Hi! I got a different problem with mine. Hindi niya nakukuha yung bobbin thread and yung krayom nag tuturn siya sa left pag nagmanual knob ako for setting up (trying to get the bobbin thread) hope you could help me out. I just got it earlier and baka di ko mareturn sa seller 😭
@@myeonfinity500 hi, madami ngang ganung issue, na resolve naman so far. i created two videos para jan. kindly just watch the part 2, th-cam.com/video/-UH5rBfqfmY/w-d-xo.html saka part 3, th-cam.com/video/Qx_Nhl0T2gY/w-d-xo.html kindly just follow the instructions. if di pa din ma-resolve please le me know
Thank you so much for this video! It’s really helpful. The issue I was facing is that it will sew a few seconds and then the thread gets bungled up and the machine gets jammed. It kept happening and I can’t pull out the fabric. I made the mistake of tugging on it and now I bent the needle. 🤦🏼♀️ Any ideas why it keeps getting jammed? Appreciate your response on this.
kala ko nung una hindi worth it tong pagbili kunang ganito peru nong nakita kotong vlog mo ,,subrang saya namin ng misis ko sa ngayun magagamit kuna talaga ito pang diy,..salamat talaga idol
1stday ko manahi sa aking 12 stitch.. Ayun laging naalis ang sinulid sa kayarom. Lula na ko bago matapos kakabalik 😊😂 Salamat sa at nalaman ko ang dahilan😇 dami ko natutunan
sir. i've been looking for someone na makkapag ayos nung sew simple ko na sewing machine.. hndi po kasi tumatiming yung sa bobbin kaya binabangga ng nedle yung lalagyan ng bobbin.
Hi Radia, check ko yung messege mo sa fb. in the meantime, check mo tong isang video, th-cam.com/video/Qx_Nhl0T2gY/w-d-xo.html, baka andito na yung solution
Super helpful po ng video na ito, my sewing machine had been stocked for almost 5 months due to non stitching issues and as I watched this video I can now use it 😊 PS. the machine his using is different to mine (Singer 1720)).
Hi! I’m so glad I found your video! It’s super helpful! I have came across an issue where my top thread is stuck inside the lever reel and it has wound around several times. Is there any way to remove this?
Thanks to this video na very informative. Kinailangan ko mapanood ang ganitong tutorial. Kasi lahat ng troubleshooting na experienced ko haha to the point na hininto ko ang pagtatahi sa sobrang nabadtrip na ko haha. Again salamat po 💖
7:10 How do I know what the tension is supposed to be? I bought this as my very first machine and I when I altered 3 of my outfits and it worked great. Today, the thread from the bottom keeps forming a giant wad at the 1st 2nd stitch.
More than a year ko ng hindi nagagamit yung machine ko. Sobrang tuwa ko nakita ko tong video mo sir. Takot din kasi akong buksan at hindi ko din naman alam anong dapat kong gawin. 👍👍👍 Thumbs up talaga sa mga tutorial mo
thank you so much po,,superb po kayo magturo about sa mini sewing machine para po kayong teacher... sana po ilagay nyo rin sa tutorial kung ano pp ang tamang number para sa thread tension
Kabbili q lang ng sew machine hindi x pwde s zipper 🤣😂 para isara n ang pinakadulo,kinamay q nlang ang pagtahi,hindi sya pwde s makapal lalu na pagttupiin!😂😂!
I stumbled to this channel while searching for videos that can help me troubleshoot my machine, wala akong experiene or nag aral ng pananahi, but I always want to learn, thanks for posting this video.. Hope to learn more about sewing. New subscriber here btw 😍☺☺☺
Thank you for this... Nasagot mo po u ng prob ko about sa pagkaputol ng sinulid. Ung paglagay ko pala sa karayom ang Mali kc nasa harap ung flat na area...haha! Youve got a new sub.
very informative. meron din po akong ganyan na sewing machine.ang issue po ng sa akin ay nasira po yung lever.pwede po ba syang iopen para maayos yung lever?
Hi , your video is really helpful. Emm, I have a proplem of loose bobbin thread. The down tread is loose, so the upper stitch isn't tight and I don't know how to tighten it . The upper thread is ok which is the down stitch
@@FatiOsman123 tighten the tension dial, placw it at number 3 or four. there's a separate video for this one. you might want to check it, go to the description box and find the title and the link there
@ProjectHobbyTeeVee Thanks for replying 🙏🏽. My tension dial is exactly at number 3 or 4, but still, the upper stich is loose. The bobbin thread is loose at the top of the stitch 😞
Thank you so much! Yesterday I had decided to get back to sewing a mini pouch and... My needle got bent! 🥶 Thus I changed a new one but had the flat and round side mixed up. Ended up the stitching got snapped every now and then. Found your tutorial. Thanks, everything is fine, and I finally finished my mini pouch. Subscribed to ur channel. 😉
Hello,your video was helpful however I have a question regarding my mini sewing machine it does not stitch and gets jammed within seconds when it's turned on to start sewing
HI question as i need help for the bobbin it is a metal class 15？user Manual just say need touse Metal Bobbin never say the size or which metal one to buy?
Napakalinaw po Ng explanation ninyo super thank you po 🥰 Peru sis hnd KO parin ma getz kZ hnd KO parin maayos ang Ang nag bubuhol buhol SA pagtahi ko 😁
Hi i followed your instructions and it helps me. Now problem happened again and I followed your instructions again but this time it's still not working
Thanks for the video. It is a big help coz nagamit ko na ulit ung sewing machine ko after a long long time. I wasnt able to use it because nagskip yung thread nya.
check if the rotary hook does not fetch the upper thread. if it does, it might have something to so with the type of fabric you are sewing like, stretchable and thin fabric. if it doesn't, there a problem with the timing of the rotary hook and the needle. i have one video for that, but not sure if it has subtitle. just check the description box and you can find the link and the title there.
I just purchased a used UFR-505 The pink wheel will only stop on 7 - 12 The wheel will not move to the lower numbers where the straight stich is. Is there a fix for that?
Hi good morning, I'm your new subscriber, and I learned many things regarding trouble shooting, especially the tension adjustment I'm so happy for it because that's one of my problem, another problem kapag magtahi ako steady lang Siya hindi tumakbo, hindi naman over used ang makina ko kasi hindi naman palaging ginagamit. Can you help me please. Thank you and God bless
Hello, po. Thanks for sharing your knowledge about this machine. I have a question the same as #1, ang case lang po sa akin, while naka ipit na ang tela para sana makapag start na ng sewing, hindi na po kinukuha nung upper thread ang nasa bobbin na thread, okay naman po lahat ng pag set up kasi nakapag tahi naman po ako before po nag exist ang problem. Inayos ko na rin ang needle (and I tried changing the needle also), okay na rin yung pag extend ng thread sa may bobbin. I just bought the machine kasi and pang 5th ko pa na gamit ng pag tatahi and di na gumagana after. Sana po meron kayong maishare pa na solution. Thank you, po
i am newbie. as in binili q to ng wala pa aq idea paano mag start at gamitin. sana may video ka din ng paano magstart. as in di q alam saan aq mag start.
Hello. Hope you can answer my question. Tama Naman po Yung paglagay ko ng bobbin, with excess thread pero Hindi naglalatch Yung upper thread ko paikot sa bobbin para nakakuha ng bobbin thread. Ano kaya prob nito?
Hi everyone, please watch the whole video para ma-solve yung issues ninyo. then try solving it muna on your end. Checking the analytics of this video, nasa 6 minutes lang ang average viewing time. I created this video to extend help. With the sheer volume ng nagtatanong, medyo mahirap sagutin lahat. In as much as I wanted to accommodate everyone, challenging talaga on my part. try niyo muna gawin as per the instruction sa video. Check the part 2 din at baka dun ang solution sa issue ninyo. Other subscribers can attest how i helped everyone. I still have my office job so pasensya na po kung di ko masasagot lahat.
sir.
please pm me po sa fb.. Radia dee Thank you.
Hi! I got a different problem with mine. Hindi niya nakukuha yung bobbin thread and yung krayom nag tuturn siya sa left pag nagmanual knob ako for setting up (trying to get the bobbin thread) hope you could help me out. I just got it earlier and baka di ko mareturn sa seller 😭
@@myeonfinity500 hi, madami ngang ganung issue, na resolve naman so far.
i created two videos para jan. kindly just watch the part 2, th-cam.com/video/-UH5rBfqfmY/w-d-xo.html
saka part 3, th-cam.com/video/Qx_Nhl0T2gY/w-d-xo.html
kindly just follow the instructions. if di pa din ma-resolve please le me know
Hi po yung problem ko po is yung handwheel is nastuck ayaw po umikot kaya di po makatahi. ano po pwedeng gawin?
@@JeanLoisBautista have you tried opening it? baka nga may na stuck nga sa loob
I came for one problem, but ended up watching the whole video because it was really informative!
thanks a lot!!!
I have a problem my machine hnde ng tatahe whyyyy...? tnx
Bakit po kaya lumilihis yung karayom dati naman stable sya
Hehhe you are right. 😂
Kahit 2yrs na itong videong ito, malaki parin ang naitulong sa problema q sa sewing machine q.. maraming salamat po.
Thank you so much for this video! It’s really helpful. The issue I was facing is that it will sew a few seconds and then the thread gets bungled up and the machine gets jammed. It kept happening and I can’t pull out the fabric. I made the mistake of tugging on it and now I bent the needle. 🤦🏼♀️ Any ideas why it keeps getting jammed? Appreciate your response on this.
We have the same problem
@@juliennemae7986 ww2wwwwa
@@juliennemae7986 ww2wwwwa
Same problem
Same problem
kala ko nung una hindi worth it tong pagbili kunang ganito peru nong nakita kotong vlog mo ,,subrang saya namin ng misis ko sa ngayun magagamit kuna talaga ito pang diy,..salamat talaga idol
1stday ko manahi sa aking 12 stitch.. Ayun laging naalis ang sinulid sa kayarom. Lula na ko bago matapos kakabalik 😊😂
Salamat sa at nalaman ko ang dahilan😇 dami ko natutunan
sir. i've been looking for someone na makkapag ayos nung sew simple ko na sewing machine.. hndi po kasi tumatiming yung sa bobbin kaya binabangga ng nedle yung lalagyan ng bobbin.
Hi Radia, check ko yung messege mo sa fb. in the meantime, check mo tong isang video, th-cam.com/video/Qx_Nhl0T2gY/w-d-xo.html, baka andito na yung solution
same tau ganun dn ung sa akin tumata ung karayon sa lagayan ng bobin
eto na yunh remedy na nakikita ko, th-cam.com/video/eivRK-fO9gE/w-d-xo.html
This is the most helpful tutorial or video I've seen when it comes to using such sewing machine. Thank you po!
@@cessciliaa maraming salamat din ❤️❤️❤️
Thank you for this video. I am able to use it again. You are amazing 😊
Thank you po. Sa inyo ko nakuha ang solusyon sa problem ko sa machine. Super informative video.
Super helpful po ng video na ito, my sewing machine had been stocked for almost 5 months due to non stitching issues and as I watched this video I can now use it 😊 PS. the machine his using is different to mine (Singer 1720)).
Thank u po malaking tulong ang videos ninyo
Thnk you so much for your vedio , i've learn more information from this vedio,❤️❤️❤️👍👍👍 God bless you more🙏🙏
OMG youre a savior. baliktad lng pala pagkakalagay ko sa karayum kaya di nag stistitch.. soooo very thank you pooo!!!
Hi! I’m so glad I found your video! It’s super helpful! I have came across an issue where my top thread is stuck inside the lever reel and it has wound around several times. Is there any way to remove this?
Thanks 4sharing .solve na ang problema ko ...putol putol ang thread...ngayon magamit ko ang sewing machine ...
you're welcome, happy sewing
Thank u so much for this ved na sstres nku sa sewing machine ko kc plagi na puputol ang thread
I love this!
Hi! sir maraming salmat po..
Kkbili ko lng ng ganito.. at thankful po ako dhil npnood ko po itong video n ito🥰
you're welcome 😊 happy sewing!
Thanks po talaga Sir kasi ikaw po talaga nakatulong sa katulad kong baguhan di ko pa alam kung ano gagawin hihihi thanks alot😘
PDating palang sew simple ko but in advance, Pinanood ko na to salamat po
this is very helpful for the begginers like me na first time gagamit ng sew simple sewing machine👍 tnx for sharing
you're welcome
Maam ung sewing machine mo ba ayos pa? Sa akin bigla na lang hnd umandar😔 may pag asa pa ba maayos to?
Maraming salamat po sir marami po akong natutunan kahit sa konting oras lang❤❤❤❤❤
Thanks to this video na very informative. Kinailangan ko mapanood ang ganitong tutorial. Kasi lahat ng troubleshooting na experienced ko haha to the point na hininto ko ang pagtatahi sa sobrang nabadtrip na ko haha. Again salamat po 💖
Same tayo hahaha
7:10 How do I know what the tension is supposed to be?
I bought this as my very first machine and I when I altered 3 of my outfits and it worked great.
Today, the thread from the bottom keeps forming a giant wad at the 1st 2nd stitch.
Thanks for your video on TH-cam for my sewing machine it's was worth it and good tips to
you’re very much welcome. :)
very helpfull, thank you so much for this😊 im very happy...
thank u sir ha.. kaya pala panay trouble or ngjjump pagttahi ko need pala palitan ng needle.. thanks po sa video nio
Very helpful tlgah content nito sira Kasi ganyan machine q now🥹 hanap q sulusyon
More than a year ko ng hindi nagagamit yung machine ko. Sobrang tuwa ko nakita ko tong video mo sir. Takot din kasi akong buksan at hindi ko din naman alam anong dapat kong gawin. 👍👍👍 Thumbs up talaga sa mga tutorial mo
happy sewing 😊
Thank you po for your help ful information.. GodBless
I hving a problem with my machine and found ur video thanks po
You're welcome!
Hi po ,paano po kung masinsin po ang tahi? Kahit naka set po sa malayoan na straight line
thank you so much po,,superb po kayo magturo about sa mini sewing machine para po kayong teacher...
sana po ilagay nyo rin sa tutorial kung ano pp ang tamang number para sa thread tension
may bracket yung number, mostly nasa number 3, pero it doesn't always follow. do a tension test para mas sakto ang tension
Maraming salamat po, natatawa po ako, lahat ng troubles, naranasan ko ngayon. 1st time ko lang manahi po, malaking tulong po ito sakin. 😇
you’re welcome!
Kabbili q lang ng sew machine hindi x pwde s zipper 🤣😂 para isara n ang pinakadulo,kinamay q nlang ang pagtahi,hindi sya pwde s makapal lalu na pagttupiin!😂😂!
I stumbled to this channel while searching for videos that can help me troubleshoot my machine, wala akong experiene or nag aral ng pananahi, but I always want to learn, thanks for posting this video.. Hope to learn more about sewing. New subscriber here btw 😍☺☺☺
thanks a lot!
Always re watching this while sewing----never fails me💪💪💪
salamat!
Magandang araw po.bakit po hindi nkagat ang tahi or hindi nagana ang tahi?
check mo sa description box, may video na about jan, andun ang list ng lahat ng troubleshooting videos kasama pati link
Thank you for this... Nasagot mo po u ng prob ko about sa pagkaputol ng sinulid. Ung paglagay ko pala sa karayom ang Mali kc nasa harap ung flat na area...haha! Youve got a new sub.
happy sewing! salamat!
Wow, thanks for this comprehensive video
Hi po! Pwede po bang gumawa ng lettuce hem using this sewing machine?
Thank you po. Kanina pa ko stress sa skipped na tahi. Thank you po
Thank you talaga sa video. Begginer here.
Tnx2 po my sagot na ang prob ko Mali o baliktad Ang pag lagay ko ng needle. tnx2 po sa mga tips u..😁🤗👍☝️
ayun naman pala hehehe. You're welcome 😀
Antagal ko d nakapagtahi because of some issue. Thanks much po!🥰
very informative. meron din po akong ganyan na sewing machine.ang issue po ng sa akin ay nasira po yung lever.pwede po ba syang iopen para maayos yung lever?
Hi , your video is really helpful. Emm, I have a proplem of loose bobbin thread. The down tread is loose, so the upper stitch isn't tight and I don't know how to tighten it . The upper thread is ok which is the down stitch
@@FatiOsman123 tighten the tension dial, placw it at number 3 or four. there's a separate video for this one. you might want to check it, go to the description box and find the title and the link there
@ProjectHobbyTeeVee Thanks for replying 🙏🏽. My tension dial is exactly at number 3 or 4, but still, the upper stich is loose. The bobbin thread is loose at the top of the stitch 😞
@@FatiOsman123 th-cam.com/video/d7LMk9K3XT8/w-d-xo.htmlsi=cbB96-PLfy7FE6gC
Thank you so much! Yesterday I had decided to get back to sewing a mini pouch and... My needle got bent! 🥶 Thus I changed a new one but had the flat and round side mixed up. Ended up the stitching got snapped every now and then. Found your tutorial. Thanks, everything is fine, and I finally finished my mini pouch. Subscribed to ur channel. 😉
thanks a lot! happy sewing.
@@ProjectHobbyTeeVee pano po I adjust pag lose threading..
@@ProjectHobbyTeeVee see others comments also they are seeking ur help
Thank you so much! Do you also have a tutorial for shirring fabrics using this machine?
You're welcome. yep, although i used mini sewing machine in the video, it has the same principle.
Sobrang nakatulong po video nyo
Salamat po😊
Thank you po. It helped me a lot
Sa tension pala aq kulang. Maraming salamat po. Nakatulong ng malaki sakin
@@musicismylifechannel1480 glad to be of help
Geenasilk po ano magandang tension po ?? Hoping masagot po
Sulit 28 minutes😊 thank you ❤️
Hello,your video was helpful however I have a question regarding my mini sewing machine it does not stitch and gets jammed within seconds when it's turned on to start sewing
check first the type of fabric you're sewing. stretchable ones, spandex, or ultra thin fabric will usually have this type of sewing issues.
HI question as i need help for the bobbin it is a metal class 15？user Manual just say need touse Metal Bobbin never say the size or which metal one to buy?
not quite familiar with the bobbin sizes but get the 1cm tall ones. i have metal bobbins that are shorter and they're causing some sewing issues.
@@ProjectHobbyTeeVee someone just confrim the singer type class 15 bobbin is correct one to use.Thanks for your information n help too
Thank you so much po ❤️ Super clear Ng explanation Ang Ang Dami kong natutunan.... Beginner here😊
enjoy sewing, subscribe na rin, please
thank you for this video... very detailed and clear po ..💕 more videos to come
Super thankful to watch this☺️❣️ nasolve ung problem ko thank u so much poh nakapa useful poh ng video NYO sir❣️☺️
maraming salamat! hapoy sewing 😊
Laking tulong sakin nito sobrang maraming salamat ❤️❤️
Thank you very much for this video 😄
Napakalinaw po Ng explanation ninyo super thank you po 🥰
Peru sis hnd KO parin ma getz kZ hnd KO parin maayos ang Ang nag bubuhol buhol SA pagtahi ko 😁
lalaki po ako. hindi ako sis. may video na yan, go to the description box at hanapin ang title at link ng video
Maraming salamat po may napag aralan ako
Thank you so much for making this video. It's extremely helpful!👍🏽👍🏽👍🏽
What tension set up for heming jeans
Ang helpful mo po narealized ko kaya d kumagat kagat kc mali pag ikot ko sa handle
Thank you for sharing,may natutunan din ako,ngayon alam ko na kng bakit di ako matapos tapos sa pananahi😁..maraming salamat po ulet..godbless
you’re welcome. happy sewing 😊
Hi i followed your instructions and it helps me. Now problem happened again and I followed your instructions again but this time it's still not working
Hi, tnx a lot for this very helpful video. Have a question though, pano ko gagawin - d po xa nakakatahi. Tnx a lot & God bless.
check the video about non-stitching sew simple sewing machine sa channel
What # of tension did you use??Thanks
Thanks for the video. It is a big help coz nagamit ko na ulit ung sewing machine ko after a long long time. I wasnt able to use it because nagskip yung thread nya.
Great! nakakatuwa naman. happy sewing 😊
Maraming maraming salamat po! Very helpful po. 😍 God bless you more po! 🥰
Very helpful, nsolve yung skipping issue ng sewing machine namin. thank you po sa video na to! 😊 ❤️
Hello i have a question my sewing machine UFR 505 is not sewing? Any clue
check if the rotary hook does not fetch the upper thread. if it does, it might have something to so with the type of fabric you are sewing like, stretchable and thin fabric. if it doesn't, there a problem with the timing of the rotary hook and the needle. i have one video for that, but not sure if it has subtitle. just check the description box and you can find the link and the title there.
.may vedio po ba kayu dun sa ibat -ibang klase ng karayum sa sewing machine.
yep, When to change needles ang title.
Pwede po b yan s pag gwa ngbashan
Tink yu po , andami kong natutunan...
GOD BLESS
Super informative and helpful! Thanks! 👍
Thank you. This helps
I just purchased a used UFR-505 The pink wheel will only stop on 7 - 12 The wheel will not move to the lower numbers where the straight stich is. Is there a fix for that?
have you tried turning it on both directions? or you might want to open it and check what's preventing it from turning
Very informative.
Keep making this kind of video sir
Love from me
Ang thank you laking tulong mo un pag tuturo mo ..sobrang thank you
Hi sir ano poba ang problem ng mini 505 sewing kobayaw mag tahi
buti nalang tlga nakita ko to, kasi ung sakin natatanggal ung sinulid sa karayom, tq po, new sub😊
salamat! 😁
Hi good morning, I'm your new subscriber, and I learned many things regarding trouble shooting, especially the tension adjustment I'm so happy for it because that's one of my problem, another problem kapag magtahi ako steady lang Siya hindi tumakbo, hindi naman over used ang makina ko kasi hindi naman palaging ginagamit. Can you help me please. Thank you and God bless
grabe ang ganda ng hands mo. thanks sa tutorial
hahhaha, napansin mo talaga yun?
Do u know why and how to fix press foot pedal and the sewing part goes vrry slow, almost like thre is no power?
My machine is sewing upside down, any suggestions.
Hello, po.
Thanks for sharing your knowledge about this machine.
I have a question the same as #1, ang case lang po sa akin, while naka ipit na ang tela para sana makapag start na ng sewing, hindi na po kinukuha nung upper thread ang nasa bobbin na thread, okay naman po lahat ng pag set up kasi nakapag tahi naman po ako before po nag exist ang problem. Inayos ko na rin ang needle (and I tried changing the needle also), okay na rin yung pag extend ng thread sa may bobbin.
I just bought the machine kasi and pang 5th ko pa na gamit ng pag tatahi and di na gumagana after. Sana po meron kayong maishare pa na solution. Thank you, po
Good day ano mo dapat kung gawin natatanggal yong bobbin holder na plastic ano po ang ggwin ko tnk you god bless
Hi there. I'm planning to buy this soon, Pwede po ba yung tweed cloth dito?
Ano po kaya problema bkit pagdating s zigzag nagjajam po un sewing machine? Slamat po s pagsagot.
i am newbie. as in binili q to ng wala pa aq idea paano mag start at gamitin. sana may video ka din ng paano magstart. as in di q alam saan aq mag start.
Thankyou so much po sir 😊♥️♥️
Ur video is very helpful and relevant po. Thank youuu!!
my pleasure to help :)
Thanks a lot.it was so helpful your instruction to the beginners.
mathieu maiga you’re welcome 😄
matatahi xa konte tpos magbubuhol na ung cnulid sa ilalim?
Thank you po.❤️
@Project Hobby TeeVee ano po yung best presser foot for this machine? Nawala po kasi yung sa makina ko.
yung kagaya sa original niya, hanap ka lang sa lazada o shopee
saan nakakabili ng bibbin case ng fhsm 505(A)
Do you know why the needle keeps hitting the needle plate? How can you fix this on this machine?
Hello po ano pong tawag dun sa maliit na bakal dun sa bandang lagayan Ng bobbin?
Salamat sa video mo. Na solve na ang problem ko 😁😁😁
Hello. Hope you can answer my question. Tama Naman po Yung paglagay ko ng bobbin, with excess thread pero Hindi naglalatch Yung upper thread ko paikot sa bobbin para nakakuha ng bobbin thread. Ano kaya prob nito?