ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

My New Everyday Charger! Ethix D6 Pro Must Have!

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 มี.ค. 2023
  • Let's Check Out This All New Ethix Branded Charger!
    ▶️Where To Get Your Very Own:
    ✔️www.myfpvstore...
    ▶️Let's Build A Master Drone:
    ✔️ • Let's Build a Master D...
    ▶️My Review of The Speedybee V3 Stack:
    ✔️ • All New SpeedyBee V3 S...
    ▶️Aikon F7 AIO 60 AMP:
    ✔️usa.banggood.c...
    ▶️Let's Build It Playlist by DrainMan:
    ✔️ • Let's Build It !!
    ▶️Everything To Know About LED's:
    ✔️ • Betaflight LED's !! Ev...
    ▶️All Drone Pilots Need A Power Supply! Build Your Own!
    ✔️ • The Ultimate DIY Varia...
    ▶️If you don't want to build one, Buy One!
    ✔️amzn.to/37s0SdE
    ✔️usa.banggood.c...
    ▶️Whole Trouble Shooting Series:
    ✔️ • FPV Electronics Troubl...
    ====▶️My Scope:
    ✔️amzn.to/2Y7NUtc
    ====▶️Cheap Version:
    ✔️amzn.to/2PC8Ogj
    ✔️usa.banggood.c...
    ====▶️Camera For My Scope:
    ✔️amzn.to/3SA2ANg
    ====▶️LED For My Scope:
    ✔️amzn.to/3ZiVsXC
    ====▶️Lens For My Scope:
    ✔️amzn.to/3kxPQKs
    ▶️My Soldering Iron:
    ✔️amzn.to/2Oj95XS
    ▶️Cheap One
    ✔️usa.banggood.c...
    ▶️Micro Pencil Soldering Tip
    ✔️amzn.to/3Fq1dKm
    ▶️My Soldering Iron Tips:
    ✔️amzn.to/39IT453
    and
    ✔️amzn.to/2Oj7r8C
    ▶️My Favorite Multimeter:
    ✔️amzn.to/3Y3QlJT
    ▶️Cheap One
    ✔️usa.banggood.c...
    ▶️Must Have Solder Mat:
    ✔️amzn.to/2FXQKuU
    ▶️No Cotton Foam Cleaning Swabs:
    ✔️amzn.to/3joxWUi
    ===▶️ / drainmanfpv
    ▶️MyFPV Slidez:
    ✔️www.myfpvstore...
    ▶️Blue Loctite:
    ✔️amzn.to/3fB0lqL
    ▶️When A Motor Rips Off:
    ✔️ • What Would You Do If T...
    ▶️How To Set Up LED's
    ✔️ • Betaflight LED's !! Ev...
    ▶️ES121 Electric Driver:
    ✔️ • ES121 Electric Screw D...
    ▶️If You Want The Beast by iFlight:
    ✔️amzn.to/354KxqW
    ✔️www.myfpvstore...
    ▶️iFlight Beast Review!
    ✔️ • Why Wouldn't You Use T...
    ▶️iFlight Beast Build & Flight Video!
    ✔️ • Let's Build The H7 Bea...
    ▶️Crossfire Nano SE:
    ✔️www.myfpvstore...
    ▶️Unify Pro 32 HV:
    ✔️www.myfpvstore...
    ▶️Caddx Air Unit for DJI
    ✔️www.myfpvstore...
    ▶️Custom DrainMan Motors!
    ✔️www.myfpvstore...
    ▶️Smoke Stoppers:
    ✔️amzn.to/3tsWhhq
    ✔️amzn.to/2YL7trB
    ✔️amzn.to/3tsMt77
    ✔️www.myfpvstore...
    ▶️All Drone Pilots Need A Power Supply! Build Your Own!
    ✔️ • The Ultimate DIY Varia...
    ╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
    ║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
    ╠╗║╚╝║║╠╗║╚╣║║║║║═╣
    ╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
    / drainmanfpv
    / drainmanfpv
    ▶️If you want to learn about LED's:
    ✔️ • Betaflight LED's !! Ev...
    ▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2-Day Shipping)
    ✔️amzn.to/2PjqUDi
    or
    ✔️www.myfpvstore...
    ▶️How To Taranis:
    ✔️ • How To Frsky Taranis
    ▶️My Electronic Screwdriver:
    ✔️ • ES121 Electric Screw D...
    ▶️1.5mm Driver:
    ✔️amzn.to/3txYarX
    ▶️Hobbywing:
    ✔️www.myfpvstore...
    or
    ✔️amzn.to/31e6jFM
    ▶️Loctite:
    ✔️amzn.to/39QY5HE
    ▶️Screw Pack:
    ✔️amzn.to/2BPzBSq
    ====▶️How To Set Up A Throttle Cap: (Become A Better Pilot)
    ✔️ • The Ultimate Throttle ...
    ====▶️My Go-To Pack:
    ✔️4s : www.myfpvstore...
    ✔️6s : www.myfpvstore...
    ====▶️Flight Controllers:
    ✔️www.myfpvstore...
    ====▶️ Quadcopter Frames:
    ✔️www.myfpvstore...
    ====▶️ The Goggles I use:
    ✔️amzn.to/3sQ5ksu (Comes w/ 2 Modules)
    ✔️Analog - www.myfpvstore...
    ====▶️My Radio:
    ✔️amzn.to/3sU9Fem
    ✔️Non-DJI: amzn.to/39dqI3c
    ✔️HD - amzn.to/2AVAEQo
    ====▶️ Video Module That I use (When Using Analog):
    ✔️ www.myfpvstore...
    ====▶️Bench Power Supply:
    ✔️amzn.to/3cpIOhE
    ====▶️My Camera Used:
    ✔️amzn.to/2wX0eCg
    ====▶️My Cam Mic:
    ✔️amzn.to/3b2ZoUZ
    ====▶️Contact Me: @DrainManFPV on FB or DrainManFPV@gmail.com
    ====▶️I'Gizzle: / drainmanfpv
    ====▶️ / drainmanfpv
    #ethix #drone #fpv

ความคิดเห็น • 50

  • @DriftaholiC
    @DriftaholiC ปีที่แล้ว +7

    Every ISDT charger I've bought with a fan has a noisy fan.

  • @Whack_fpv
    @Whack_fpv ปีที่แล้ว +4

    hey man can you do a more indepth video on your field charging case? i'd like to build something similar to that myself

  • @randyscottslavin
    @randyscottslavin ปีที่แล้ว +1

    are you Josh Bardwell from the multiverse?

  • @StR8KiLLA_FPV
    @StR8KiLLA_FPV ปีที่แล้ว +2

    First comment! My dude drainman killing the reviews as always! Looks sick man

  • @jefffpv2759
    @jefffpv2759 ปีที่แล้ว +1

    i have the hota h6 pro. very similar and i like it a lot. lacks internal resistance readout. everything else i would ever want is there.

  • @wisider
    @wisider ปีที่แล้ว +1

    I would love to watch this (future?) charging box video! Love it! 🤘😄💜

  • @Bitathisandthat
    @Bitathisandthat ปีที่แล้ว +1

    Nice charge box...i need to upgrade mine to have soundz or somthing like that as ive just got a 6s 18p 18650 pack that i made and printed a box for..has like 50ah give or take..but i so need soundz when out flying.. i have a lead that has 3 xt60s on the end so i and mates can all plug in and charge....love yours tho.

    • @LowetheTechGuy
      @LowetheTechGuy ปีที่แล้ว +1

      Dang bro that's 108 cells! I have 12 LTO square cells I may build into a field charge bank.

  • @kheshavdheereess5243
    @kheshavdheereess5243 4 หลายเดือนก่อน

    That battery box tho😎😎😎

  • @LowetheTechGuy
    @LowetheTechGuy ปีที่แล้ว

    I had 2, which were Hota, and I forget the 2nd "rebrand." One had a built in psu and the other uses an external psu. I loved them, but they both burnt up. I had them for about a year before the first burnt. So I stole the psu from it and powered the external psu one until it died. I still have and use the internal psu. Hopefully, this rebrand will last a little longer because they are nice!

  • @davidjohnston3083
    @davidjohnston3083 9 หลายเดือนก่อน

    Hi Drainman I bought the Hota D6 another feature I liked, with a charge cord made with female xt60 at both ends a channel will output power to a drone to run or check motors. Gives your an adjustable DC output power supply for bench checking. Your not discharging a battery you could fly with on bataflight.

    • @libertybicycles1629
      @libertybicycles1629 8 หลายเดือนก่อน

      hey do you have a video of this anywhere? i like the sound of that, i just received my d6 pro

    • @michaelwhouse46
      @michaelwhouse46 5 หลายเดือนก่อน

      @@libertybicycles1629 select a channel and short press the wheel to select task. At the top you can select “power supply” instead of “charge” that it’s usually on. After you select that you can change the output voltage amps. Up to you if you need full 6s or 4s voltage, just needs to be highly enough to power the esc/fc because you are going to make a cable that plugs into the charger and the other end plugs into your quads xt60/30. Now you can test everything as if a batter was plugged in but you aren’t draining a battery. If you do this with props on BE EXTRA CAREFUL. I do this on the bench, props off, and then you can spin motors and check all settings that you’d need a batt connected to look at.

  • @danny_cunningham
    @danny_cunningham 10 หลายเดือนก่อน

    Great build on the charge box

  • @TriMeX1987
    @TriMeX1987 ปีที่แล้ว +1

    Looks good especially the field charging case. Man... you have 2 26000 mah lipo's in there? thats allready worth 800 to 900 Crazy.

  • @crank_FPV
    @crank_FPV 11 หลายเดือนก่อน

    Drainman..love your videos and we have good taste. I picked it up too lol even though I already had the regular version that clear was too sweet to pass up

  • @greedfox7842
    @greedfox7842 8 หลายเดือนก่อน

    its a hota d6... with a ethix sticker on it. it even shows the same startup screen.

  • @nomadmusk
    @nomadmusk 10 หลายเดือนก่อน

    is the only difference from the hota the clear shell?

  • @randyscottslavin
    @randyscottslavin ปีที่แล้ว

    Hey hey, I got this charger on your recco and I love it BUT It's reading one of my batteries as HV and charging it as such... but the battery isnt HV and it doesnt let me charge it non-HV. Any ideas about this?

  • @sunsetpark_fpv
    @sunsetpark_fpv ปีที่แล้ว

    Awesome review brother. Your enthusiasm regarding the charger made me want to buy one LOL. Mr Steel needs to send you a thank you note 😎

  • @maynardrodrigues8450
    @maynardrodrigues8450 6 หลายเดือนก่อน

    How to add name on ethix d6 pro?

  • @flasholiver69
    @flasholiver69 ปีที่แล้ว

    I bought Hotta D6 pro! Great video. Greaat charger.

  • @olegdiagilev-jb3jn
    @olegdiagilev-jb3jn 11 หลายเดือนก่อน

    Thanks a lot. Great video, I have too ethix D6 pro, it’s a great charger

  • @savyfpv8048
    @savyfpv8048 ปีที่แล้ว

    definitely buying this! my new charger too now DM always gets me haha

  • @SBvice
    @SBvice 10 หลายเดือนก่อน

    what charge board is that brudda?

  • @bladesfpv4179
    @bladesfpv4179 ปีที่แล้ว

    Great review man. Question how did you put your FPV name in it?

  • @kavonkeebs
    @kavonkeebs ปีที่แล้ว

    I just got this charger too, n it’s so dope

  • @gregtay67
    @gregtay67 ปีที่แล้ว

    Awesome video. Awesome charger.

  • @theHotpointHoodlum
    @theHotpointHoodlum ปีที่แล้ว +1

    On the same note ppl that have every single beep on there smartphone on. Turn it off……

  • @danielson101
    @danielson101 ปีที่แล้ว

    what about phone charge on top?

  • @smashfpv2046
    @smashfpv2046 ปีที่แล้ว

    Nice Tutorial Bro 🙂👍

  • @gregorydahl
    @gregorydahl ปีที่แล้ว

    30 amps at 120 volts ? .Spent all day cleaning all the drains in a house.
    Never let others dangle and swing your lipos by the weak soldered powerleads .😬
    I. You built a robot . I have a solar panel if we run out .
    I have a tailgate mini gas generator you might plug a few of thosr into .

    • @rp479
      @rp479 ปีที่แล้ว

      How much meth did it take to write thisv

  • @ABRAMOWV
    @ABRAMOWV ปีที่แล้ว

    dont buy ISDT chargers

    • @Frosttyy12
      @Frosttyy12 ปีที่แล้ว

      Why

    • @ABRAMOWV
      @ABRAMOWV ปีที่แล้ว +1

      @@Frosttyy12 my charger doesn’t work after 3 months using

  • @GlowShow5113
    @GlowShow5113 ปีที่แล้ว

    You folks and your "fpv" names ... 😅. Just fly your drones. Stop copying everything you see on TH-cam

    • @Fly_High_FPV
      @Fly_High_FPV ปีที่แล้ว +1

      Dony fuck with my brothers, we gotta whole family of dudes with FPV as a last name 💪

    • @GlowShow5113
      @GlowShow5113 ปีที่แล้ว

      @@Fly_High_FPV no shit.... That's exactly my point. You've all "branded" yourselves like the TH-cam pilots. The bandwagon is real among this group. I'll keep doing my own thing, no brand necessary.

    • @sunsetpark_fpv
      @sunsetpark_fpv ปีที่แล้ว

      @@GlowShow5113 OMG you're such an individual!
      Holmes? Any relation to John? (He was known for his large penis, you'll be known for being a large penis.... 🤣)
      And for the record, this is the first time in my life I've ever branded myself anything (besides being a douchebag) and I am a PROUD card carrying member of the FPV community

    • @Fly_High_FPV
      @Fly_High_FPV ปีที่แล้ว +1

      @Bobby Holmes i run a drone shop, branding is a big part of what i do 🙌

    • @LowetheTechGuy
      @LowetheTechGuy ปีที่แล้ว +2

      Dang it, Bobby, you can't just go around hating everyone that has FPV in their name. Stop copying all that fly Fpv and just add FPV to your name!