If drilling a hole in a wall just get an envelope, stick it to the wall with masking tape underneath where you’re drilling and let the envelope catch the dust. No plastic bottles or vices needed. 😊
when cutting stuff, always cut away from your hands / body , not towards it, this is how i almost lost my thumb once ( it was nearly off, but they saved it)
Cutting the first bottle was a bit dangerous as you were cutting towards yourself... One slip and that knife would do some serious damage. I would hate for that to happen to anyone. The milk jug separator wi a brilliant idea and I have a 5-gallon pail that is FULL to the rib with nuts bolts washers screws and such; this is ideal for what I would need to separate them. I cannot even move the bucket as it is just too heavy for even 2 men to lift... Thank you for some great ideas!
@@EmpathyStories86 Not tried it yet as I have other projects that need to be finished and moved out of the space where the 5-gallon metal pail is. It probably weighs a hundred pounds or more. I cannot move it alone!! I also do not drink milk so getting the milk container would be only possible on recycle day.
Glad someone else highlighted this too. I worked for over 30 years as a joiner and during that time saw some really bad accidents with people cutting towards their hands.
After I have turned 2 water bottles into a “drill-debris collector” and another bottle into a “nut sorter,” what do I do with the other bottles I use? Do I need to convert them to the same items so I won’t ever throw away another plastic bottle?
I have been rifilling the same plastic "recyclable" water bottle for almost 2 years!! And no holes needed to be drilled in it!! When it finally gets a crack, I will have to put it in plastic recycling rececptacle and get a new $1 bottle of spring water from Walmart.
oh c'mon mr mcnegative pants. Some people think its very impressive. Life will all be smooth sailing now and someday you'll see someone doing something that looks dumb, you can think "wait a minute! I saw something even dumber!"
no you are wrong and he's wrong, it was all DONE WRONG!!! You are supposed to hit it with a centre punch to prevent the bit from wavering. Can you imagine if he had to find another cap!! Wasteful.
you mean useless and time-waisting either way!! Yes! I would have glued 4 or 6 bottles together by cutting caps at precise angles with a more advanced and precise machine and used a special plastic welder.
You can find your screws easier and pick them up easier...so save all your caps because next time you buy a box of 1000 screws or 10 pounds or whatever, you can sit down and fasten each one to a bottle cap so if you are it a hurry you will be able to find them and pick them up easily!! Problem solved! I hope this guy is not an engineer for an aviation company...or car company...or a toaster manufacturer
Go to the speed setting and 2x it. I do it when I need a tutorial for a car repair or other how to video...Wait while I rummage through my tools and find the wrong size wrench then you can wait again while I rummage more! WTF is wrong with US for watching these a...these um, ah, OH I CAN"T SAY IT! I'm a respected community member (sort of anyway)
Además del arsenal (y presupuesto) que hace falta, también queda en el aire la pregunta sobre qué se hace con todas las botellas que lleguen después de las primeras que se utilizaron. Quizá faltó proponer dedicarse a fabricar estos artilugios y montar un negocio para venderlos.
Very clever! I wish there was a way to do that with a drill press. I’m in Wood guild and we make wooden toys for different children’s organizations. We drill a lot of holes on our drill presses. It’s the biggest mess in the shop.
Easier to use an envelope. Open the flap up, and use sticky tape to stick the envelope flap to the wall just below where you want to drill the hole. As you drill the hole the sawdust falls into the envelope, peel the envelope off and empty the sawdust into a bin.
So he goes to all the trouble to make that tray out of a milk jug, & still throws most of it away. I think it'd be easier to recycle the whole thing & just sort out the screws like a normal person...
I like the dust catcher, but you don't even need the bottom bottle, just don't bore a hole in the cap of the top one. And why are you throwing away that perfectly good wood filling dust? lol
Please learn how to use a utility knife in stop cutting towards your hand before you sever your tendons that's a very expensive corrective surgery cut away from your hand.
Why did you drill 3 holes and put no screws? What do we do to repair that mistake. I almost got fired but the guys found something to repair them. I am going back to try this again.
LOL such a cute video. I mean the amount of thoughts and ideas went into baiting us to watch it, and at the same time display a hand with a cheeky personanility, half way through I forgot that this is a bait and enjoyed it LOL
With over 7 million views…there’s a real lesson to be learned here about how to generate enough interest and be awarded TH-cam “Million Views” plaque$$$. And it all starts with instructing viewers on how to cram 10 pounds or kg of crap into a 5 pound or kg. bag!
NOTICE - Large number of viewers brings extra responsibilities. Please add a warning that you should never cut toward your body (especially your hands in this case) but away from it in case the knife slips. You do not know who may attempt this job NOTICE
If drilling a hole in a wall just get an envelope, stick it to the wall with masking tape underneath where you’re drilling and let the envelope catch the dust. No plastic bottles or vices needed. 😊
How you say shop vac.
Piece of folded A4.
@@nhpIII4482 ...or broom
Да можно было одной бутылкой побольше отделаться
😅😅😅😅😅😅
The way this guy uses a very sharp blade it is amazing he hasn’t done himself a serious harm with a knife slip. Never cut towards your wrist or hand.
Exactly
Glad I'm not the only one who noticed lol. I was just waiting for the blade to slip...
@@stevepetty2313 it wouldn't have showed it if he did slip
Julian Ellis: I thought the same and marveled at his confidence in his knife skills. I guess accidents never happened to this fellow.
I see that too and agree with your point of view
Why put a picture that was never really a part of the video?
i will never thow away a plastic bottel, because i live in germany. We have a deposit on every plastic bottles of 25ct, each 😂
In the U.S bottles are 5 cents a piece but some liquor bottle I believe can be 15 cents. 25 for one bottle is awesome
@@JohnDenuedude.. you are literally paying 25 cents extra for that awesomeness. each and every time. lol.
when cutting stuff, always cut away from your hands / body , not towards it, this is how i almost lost my thumb once ( it was nearly off, but they saved it)
اینجور مسایل را صوتی هم پخش نماییم چون نابینایان هم از آنها استفاده نمایند
Cutting the first bottle was a bit dangerous as you were cutting towards yourself... One slip and that knife would do some serious damage. I would hate for that to happen to anyone. The milk jug separator wi a brilliant idea and I have a 5-gallon pail that is FULL to the rib with nuts bolts washers screws and such; this is ideal for what I would need to separate them. I cannot even move the bucket as it is just too heavy for even 2 men to lift... Thank you for some great ideas!
Have you tried yet. And is it really as effective as it appears in the video?
@@EmpathyStories86 Not tried it yet as I have other projects that need to be finished and moved out of the space where the 5-gallon metal pail is. It probably weighs a hundred pounds or more. I cannot move it alone!! I also do not drink milk so getting the milk container would be only possible on recycle day.
Glad someone else highlighted this too. I worked for over 30 years as a joiner and during that time saw some really bad accidents with people cutting towards their hands.
I was waiting to see the purpose for putting a screw into a plastic bottle cap, never saw it. Stupid bait.
I'm hoping it comes up in my suggested feed so I can hit the do not recommend. I wish there was a way to block channels besides that.
2:18
Thanks saved me a lot time!
It feels like there couldn’t be a worse use for your time. This takes a lot more effort to make than the effort it saves 😅
sure there's a worse use of your time - watching this video
@@kevink2208 I agree.
Waste of precious time watching, what happened to the two glued bottles with three holesand on wood
OK@@milxpress
時間を返せ
After I have turned 2 water bottles into a “drill-debris collector” and another bottle into a “nut sorter,” what do I do with the other bottles I use? Do I need to convert them to the same items so I won’t ever throw away another plastic bottle?
And why waste that good sawdust !
Did you notice that collecting the sawdust might only work in certain ‘angles’.
Csinálj a szomszédaidnak is 100 kilométeres körzetben.😊🕊
Делай каждый день "сборщик опилок" и продавай, на бутылку воды хватит
Very slick, but I thought he was going to slice his hand open !!
I thought he was making a toy..😒😔
I will try my best to dispose of any plastic bottle before they wasting my time!
I agree. I dispose of ALL my recyclable bottles in a responsible way at my local recycling center. I don't need them for this silliness.
I have been rifilling the same plastic "recyclable" water bottle for almost 2 years!! And no holes needed to be drilled in it!! When it finally gets a crack, I will have to put it in plastic recycling rececptacle and get a new $1 bottle of spring water from Walmart.
А еще можно сделать гантели для дистрофиков из двух пластиковых бутылок!😊
Wow! I could have hundreds of these within a year!
Well, there's 4 minutes I'll never get back.
😁😁😄
Я за 2 посмотрел - скорость 2
Spot on!
I should have never doubted this comment. I am truly sorry 😂😂😂😂😂
Boy. You said it!!
Suckered me into watching ......feel really dumb for falling for this idiotic video
this has to be the most unimpressive "hack" I've ever seen!
Or better yet “never seen!”
oh c'mon mr mcnegative pants. Some people think its very impressive. Life will all be smooth sailing now and someday you'll see someone doing something that looks dumb, you can think "wait a minute! I saw something even dumber!"
El acerrin no se bota, se mezcla con pegante de madera y surve para rellenar huecos y volver la madera a siu forma original, lijando y listo.
Why glue the two bottles together? It works just as well without the bottom bottle.
Não entendi nada...
Fazendo ligeiro ,, e ainda por cima em outra língua....!!
Não clico
Good thing you marked the center of the cap. Idk how else you would have known where to drill.
I would have used a micrometer and got it to 1/1000 of a inch...I'm pretty sure he's around 8/1000 or an inch off centre. Sloppy
I could've never centered that hole in the bottle caps! Thank goodness for markers!
Paige: I thought that a weird step as well! Ha, ha.
no you are wrong and he's wrong, it was all DONE WRONG!!! You are supposed to hit it with a centre punch to prevent the bit from wavering. Can you imagine if he had to find another cap!! Wasteful.
Why was there a need to glue 2 bottles together? One would have done the same job.
I think to demonstrate the principles ...
you mean useless and time-waisting either way!! Yes! I would have glued 4 or 6 bottles together by cutting caps at precise angles with a more advanced and precise machine and used a special plastic welder.
What does the screw through the blue top do
You can find your screws easier and pick them up easier...so save all your caps because next time you buy a box of 1000 screws or 10 pounds or whatever, you can sit down and fasten each one to a bottle cap so if you are it a hurry you will be able to find them and pick them up easily!! Problem solved! I hope this guy is not an engineer for an aviation company...or car company...or a toaster manufacturer
I've got the bottles where do I get these machines and tools
Makes me remember those Laurel & Hardy silent movies 😂🤣
Genius. But we needs tools worth 250 $ just make that dust collector.
And how much in the emergency room if cutting toward oneself with the utility knife as demonstrated?
I can't believe I wasted the time it took to watch it
,😂
I know, but there's that "Well I've watched this far, so I might as well see it to the end" feeling 😔
Go to the speed setting and 2x it. I do it when I need a tutorial for a car repair or other how to video...Wait while I rummage through my tools and find the wrong size wrench then you can wait again while I rummage more! WTF is wrong with US for watching these a...these um, ah, OH I CAN"T SAY IT! I'm a respected community member (sort of anyway)
Qué maravilla!!!
Cuántas herramientas se necesitan para utilizar una botella en vez de barrer?
Estoy alucinada
🤣🤣🤣🤣🤣esto no tiene arreglo!!! Yo también me quedo flipado!!! Saludos
Además del arsenal (y presupuesto) que hace falta, también queda en el aire la pregunta sobre qué se hace con todas las botellas que lleguen después de las primeras que se utilizaron. Quizá faltó proponer dedicarse a fabricar estos artilugios y montar un negocio para venderlos.
se ve que el tipo está al pedo.
I'm now going to go out of my way to throw away every plastic bottle that I can.
Lolol, the thumbnail image shows a big screw/bolt stuck through a lid, but he didn't even make such a thing in the video.
Should have shown a use for the wood shavings instead of throwing them in the trash👍
Couldn't you do the first one with just one bottle?
I didn't even bother watching more than 30 seconds there are endless things you can do that are very cool with bottles and no tools
Gosh, this is all so sad. And to achieve it you have to obtain a special drill-bit, oh and a bench clamp too.
What was the first thing you made?
I cringe watching people using knives in the wrong direction
Very clever! I wish there was a way to do that with a drill press. I’m in Wood guild and we make wooden toys for different children’s organizations. We drill a lot of holes on our drill presses. It’s the biggest mess in the shop.
2:20 don't throw away saw dust. It is very good for gardening!
There's 4minutes of my life I will never get back.
Wow! It’s like I have a vise and this drill bit hanging around my basement just waiting to do this
3:45 That's nuts
I like that he wasted most of the second bottle and acts lik it a hack
What is the gold drill bit called please?
Uni-bit and/or step bit
3M views, that's 12M minutes wasted. (22.8 years wasted)
Seems like an awful lot of work just to get out of using a dust pan and a broom.
it must be easier to sweep up a bit of sawdust than to go to all this bother
Easier to use an envelope. Open the flap up, and use sticky tape to stick the envelope flap to the wall just below where you want to drill the hole. As you drill the hole the sawdust falls into the envelope, peel the envelope off and empty the sawdust into a bin.
@@johnb5456 or use a vacuum cleaner, I think most of us have one.
So he goes to all the trouble to make that tray out of a milk jug, & still throws most of it away. I think it'd be easier to recycle the whole thing & just sort out the screws like a normal person...
Thanks for sharing your techniques for easy and neat work
Mr. Tips and Hacks, your grandfather just called. He said when you use that box cutter always cut away from, not towards yourself. 😂❤
Job Interviewer: Sir where did you get you mechanical engineering degree?
This guy: Trash can university
Well dang, save the rest of the jug, you can probably use it for a scoop or something.
Here’s another tip folks, never cut towards yourself with a razor knife. Dude making me cringe. That’s a mistake you will only need to do once
But what was the use of screen display of screwed water bottle plastic cap.
While you're sorting nuts, don't forget to include the one who posted this video!
Excellent. great job
Thanks a lot
I liked the Rambo 2 arrow drill more lol, 😁😁
Thank you for this unique idea.
Thank you for sharing this tip! It helps reduce the mess of fine dust particles left behind when drilling.
Thanks for the exclamation; I couldn't figure out why he was doing that.
I have this thing called a “vacuum”. It works wonders.
I like the dust catcher, but you don't even need the bottom bottle, just don't bore a hole in the cap of the top one. And why are you throwing away that perfectly good wood filling dust? lol
Please learn how to use a utility knife in stop cutting towards your hand before you sever your tendons that's a very expensive corrective surgery cut away from your hand.
@Bob Reil-Agreed! Clever ideas, but blade safety is atrocious. 😞
One slip and lesson learnt quickly
Exactly ⭐⭐⭐
Whatever happened to wearing gloves.?🤔
Mientras lo veía pensé exactamente lo mismo!
How practical and simple, thanks for the tip.
Good idea, very useful in life
First idea is actually great. I'll just use one bottle tho. The envelope (suggested below) gives me mixed results.
I will never throw away a plastic bottle again!
Trying to be nice but these were hacks looking for a problem. sawdust collector, only on vertical surfaces? Small parts sorter?
Great tips thanks
❤
Good stuff, but the thumbnail
isn’t part of the video
Why did you drill 3 holes and put no screws? What do we do to repair that mistake. I almost got fired but the guys found something to repair them. I am going back to try this again.
Milk bottles with the handles make great scoops for gutter clearing.
You should know that you NEVER cut towards your hand or body!
LOL such a cute video. I mean the amount of thoughts and ideas went into baiting us to watch it, and at the same time display a hand with a cheeky personanility, half way through I forgot that this is a bait and enjoyed it LOL
OMG, so much faster to use a vacuum.
This guy needs something to occupy his time! 😂 ✌️🤘
Don’t cut with an exact knife towards your hand! Cut away from your hand in case you slip you won’t cut your fingers or hand.
Any scars on your hands ?
Whoa. I have an 8ft high pile of wood shavings in my basement. I never thought to sweep them up. This will save me. 😅
Девиз этого умельца-ни одно г-но не ускодьзнет от наших рук.Мусорка-лучшая среда обитания.
Do foot pegs work on the XP Lite?
With over 7 million views…there’s a real lesson to be learned here about how to generate enough interest and be awarded TH-cam “Million Views” plaque$$$. And it all starts with instructing viewers on how to cram 10 pounds or kg of crap into a 5 pound or kg.
bag!
Muchos elementos, q no es fácil tener en un hogar!!
Plastic bottles became very useful when I watched your videos
Super ale čo potom to budeš robiť zo všetkými ostatnými fľašami ? :D
Hoarding is why one would never throw away a bottle cap
Four minutes wasted... 😢
What is the drill bit used for cutting a hole in plastic bottle called? Thanks.
Step bit
Who else cringed as he cut with rhe razor towards his hand??????
Just this very little bit of use, this video waste our time so much.
I was wondering what all of this nonsene was for. Now I no longer care.
don't watch. you can't get that time back
Too late now 😝!
NOTICE - Large number of viewers brings extra responsibilities. Please add a warning that you should never cut toward your body (especially your hands in this case) but away from it in case the knife slips. You do not know who may attempt this job NOTICE
The most amazing video I've ever seen.
I just watched 3 of these videos for the first time. Very clever and useful. Subscribed. I'll be back.
Someone has too much time on their hands
Video has nothing to do with the template image.. Thumbs down..
Drill 100 Euro, cut drill tools 20 euro ,knife 10 euro , glue machine 100 euro, glue 5 euro but plastic bowl 0,05 euro
Never put fingers on the line towards the blade. I learned that the hard way. Just dont do that 🙄
There is no recycling programs where you live?
その手間を考えるなら、わざわざ作るより、掃除すればいいだけ
Thanks, tips and hacks.
That's stupid! Of zero use! Where's the cap n screw in it??
i think we are the caps and we got screwed wasting our time.
@@dougmccoll6126 haha. True.
You never use a utility knife moving towards your hand We all know what happens if you slip
I don't get it? Now what? What will the double bottle do? Is this milk jug now a sorting tray? Why is this better for our planet?