Hey brother love what your doing putting out information out I was Thinking about buying a impala ss 94-96 and putting a dart 427 1300hp should I leave 460 transmission alone or upgrade to a more high performance one i heard they break like glass thank you 🙏
@OTG not sure if this is an issue but those rotors are for rotors 1.28" thick the stock are 1.04" thick the caliper part number for those rotors is 120-10937. Have you had any issues with the ones in the video ? i bought the exact same kit you are using in the video but once i received them i saw they were for thicker rotors so im sending them back .
Awesome Video!!! You're a good brother 🙏🏾 for that it'll help me with my build also and doing an LT4 SWAP on one I'm acquiring too and which state are the in my brother? Perhaps maybe I can use your services.
Hey OTG mechanic, I was watching one of your videos where you did a powerstop brake on a 96 impala ss, those powerstop brake lines you install on it, they fit all 94-96 impala ss/ chevy caprice's?
@@otgmechanic Ok thanks, I was wondering about the because I bought the powerstop z26 brake package for my 94 caprice 9c1 just wanted know before I buy those brake lines. Thanks again!!!😊👍👍
I was told that caliper not an upgraded performance only looks and the factory piston has more surface area than the two smaller pistons added together is this true?
Will the qa1 coilovers maintain stock height? Was looking at just upgrading to just bilstein shocks from stock but if qa1 coilovers are significantly better than i might go for those. Thanks
They are adjustable so yes you can maintain stock height. Measure from ground to top of fender before install then adjust as needed to attain the same result
Just found your channel. As a 96 DCM owner I rock with this. Shout out from East Oakland Ca. 💯🔥
Yee!! 🫡🫡
Bout to turn this transcript into my wish list, this EXACTLY what I want done to my SS
Appreciate you making this man fr I have 96 ss that my pops passed down to me can’t wait to fix it up
We appreciate the time you take to document this stuff mane. Thank you sir!!!
Finally a clear video with part numbers. Thanks man!
Man I can't tell you how glad I am to find your channel! The Impala King! 🦅
💪🏾💪🏾💯💯
I just did all the front chases with moog and drilled slotted rotors from summit almost there.
Wassup Ray man?? Proud of you brother!
I have the Moog upper and lower control arms in my Summit cart...thanks for the info on the lower C arms...appreciate all your videos!
Hey brother love what your doing putting out information out I was Thinking about buying a impala ss 94-96 and putting a dart 427 1300hp should I leave 460 transmission alone or upgrade to a more high performance one i heard they break like glass thank you 🙏
Yes sir GOAT love your videos
Thanks!
iappreciate that bro!
@OTG not sure if this is an issue but those rotors are for rotors 1.28" thick the stock are 1.04" thick the caliper part number for those rotors is 120-10937. Have you had any issues with the ones in the video ? i bought the exact same kit you are using in the video but once i received them i saw they were for thicker rotors so im sending them back .
"let me show you guys something really sweet." 2 days later 🤣🤣got to love it! great video also
Good tip on the moog lowers, noted!
You Goated bro especially for diy/broke people like myself 😂😂😂
Yoooooooo. 🔥🔥🔥
My man aint playing. And the thumbnail is hard. Lol.
🔥
Definitely will be dropping my impala off too do this
There a 1/4" gap between pad to rotor. After bleeding it would close obviously is that ok or need washers
I need this done to my impala. I want a smooth riding suspension, Nothing too stiff but GOOD enough for a LS. Any recommendations?
I thought this was general b-body knowledge. Hopefully it helps those that had no idea.
It would be nice if the coil over kits came with a bracket to fit in that control arm pocket. Great info
If you get the qa1 control arms they do.
@@otgmechanic ahhhhh
3:38 😂 "Is that Thundercat? Hello brother"
I've watched these videos and you've shown different wilwood caliper part numbers lol. Any reason why?
Awesome Video!!! You're a good brother 🙏🏾 for that it'll help me with my build also and doing an LT4 SWAP on one I'm acquiring too and which state are the in my brother? Perhaps maybe I can use your services.
Atlanta
Hey OTG mechanic, I was watching one of your videos where you did a powerstop brake on a 96 impala ss, those powerstop brake lines you install on it, they fit all 94-96 impala ss/ chevy caprice's?
As long as it has rear disc brakes
@@otgmechanic Ok thanks, I was wondering about the because I bought the powerstop z26 brake package for my 94 caprice 9c1 just wanted know before I buy those brake lines. Thanks again!!!😊👍👍
Quick question I’m looking on summit what are the front caliper # and rear caliper numbers a bit confused lol
Great Video Thank You
great video. Hey, do you know where I can find some good used Tri-y headers? 96 caprice.
Start in the facebook groups
great video!!
Nice job homie🔥🔥🔥
Upgrade lT1 too lt4 would have been crazy
What type of Suspension for the Back of the Impala, for a 24 x 10 wheel Bro
The truth!!🔥
Bro what is the best rear spring and shocks and front?
Torque specs and preload for the control arms??
I can't find ultra power on the lowers, what another alternative or parts # for ultras
I was told that caliper not an upgraded performance only looks and the factory piston has more surface area than the two smaller pistons added together is this true?
Pretty much. I have the same kit on my car and didnt feel much of a difference.
Would this apply to D body as well ('96 Fleetwood). same drivetrain I think but don't know about caddy suspension
I believe so. The suspension should be the same
I need that for my 94
Will the qa1 coilovers maintain stock height? Was looking at just upgrading to just bilstein shocks from stock but if qa1 coilovers are significantly better than i might go for those. Thanks
They are adjustable so yes you can maintain stock height. Measure from ground to top of fender before install then adjust as needed to attain the same result
What you charge for coil overs and extended arms??
I order the power stop kit
How did u get the speed sensors out without breaking them 😩
Little bit of pb blast and very slowly
🔥🔥🔥🔥
Wats the cost for installation including parts
What type of dash is that ??
How much does something like exactly like your doing to this car cost ?
It will vary on the shop. Approx 4-6k
What is the advantage of coilovers ,noone ever tells us...
What about the power stop brake lines
should be direct fit
i specialist in pontiac fieros n chevy corvairs
Do you change rubber bushings to PU?
Yes
🔥🔥🔥🔥💪🏽
Say what city and state are you guys in?
Smyrna ga
Thank you very Very much sir!!!
Would the d52 fit on the back?
Nope
🏁🏁🏁🏁
where are u located?
Info in bio
If I’m pulling the engine out and freshening it I’m not going back with a LT. Not my dime tho.
Man your videos would be good if you show more work than talking
Ill work on that. Thanks for the feedback..
🔥🔥
🔥🔥