Thanks for the info! Your video really helped. Just wired in DEWHEL 12V 0.02A-10A 2-Pin CF-12 Electronic LED Flasher and didn’t have to splice any wires. I did have to connect it with jumpers because it’s square and original was round
Good info. Years ago, I upgraded my 96 to have sequential turn signals. The LED lamps may confuse the sequential module. How did your turn signals work?
Video was very helpful thanks alot plan on doing my 96 soon just dont know which bulb it is for the map light courtesy lights on the rear view mirror dont know if there 194 or 192
Although I have an Impala 5.7L model 1996, I would like to install a complete steering system on it, from the aerodynamics to all the details, with a precise and solid police system so that it has a very high level of steering accuracy... and does not interfere with the vehicle inspection system when passing traffic and the vehicle inspection. With clarification of the parts numbers, the location of their sale, their prices with shipping, and an explanation of the method of their installation ... if possible .. Greetings
So I have a 94 and I noticed my trunk light doesn't have that glass housing, it's like a bracket just with the bulb sticking out which is interesting. If you're feeling like blinding everyone you can run the oversized version of the 194 LEDs for the two under the dash, and the trunk in my case also. 921-W18-T part number
You have the metal clip style, which GM had from 91-94. 95-96 got the plastic upgrade. I’m pretty sure the mercury switch went away in 94 as well and went to the ball tip style. I’ll look for some of the 194s! Thanks for the tip. I like light when I’m trying to see what I’m doing at night.
What are the size of those flashers. I ordered leds and I got the same problem the signal light is stuck. Also the size for the reverse light is that the same as flashers?
Just the normal flashers. Part 2 video, you’ll see you’ll need resistors as well. I found Walmart sells them, but I listed the part numbers of the ones I used on my part 2 video.
@@Twostallgarage thanks I was the square adjustable ones I was asking about but I found the link in your other video thanks for the response keep up the impala videos
LEDs look a lot better!
Thanks for the info! Your video really helped. Just wired in DEWHEL 12V 0.02A-10A 2-Pin CF-12 Electronic LED Flasher and didn’t have to splice any wires. I did have to connect it with jumpers because it’s square and original was round
I've been wanting to do this same upgrade, after watching this, I think I can. Appreciate the footage 🏁🏁🏁
No problem! You got this💪🏼!
Thank you so much for this video ❤
Looks good 👍 I got a 1996 ss waiting for spring So i can put some work in. Needs wp seal 🙄, tb cleaned and paint
I hear ya! Cabin fevers been hitting my hard. So ready for spring! Good luck on the car!
Good info. Years ago, I upgraded my 96 to have sequential turn signals. The LED lamps may confuse the sequential module. How did your turn signals work?
Mine work well!
I subscribed for your kindness first Then there is content about the 1996 Impala LT1 5.7L SS my regards
Video was very helpful thanks alot plan on doing my 96 soon just dont know which bulb it is for the map light courtesy lights on the rear view mirror dont know if there 194 or 192
It’s a tiny one. Unfortunately my ones I purchased on eBay are no longer available.
All you need is the electronic flashers when running led
Thank you for sharing. This is just what I needed to see.
Although I have an Impala 5.7L model 1996, I would like to install a complete steering system on it, from the aerodynamics to all the details, with a precise and solid police system so that it has a very high level of steering accuracy... and does not interfere with the vehicle inspection system when passing traffic and the vehicle inspection. With clarification of the parts numbers, the location of their sale, their prices with shipping, and an explanation of the method of their installation ... if possible .. Greetings
The dome and door panel lights I clicked on the link to eBay it says fits 88-98 Chevy Silverado gmc sierra. Will these work?
Yeap. That’s where I got them from.
So I have a 94 and I noticed my trunk light doesn't have that glass housing, it's like a bracket just with the bulb sticking out which is interesting.
If you're feeling like blinding everyone you can run the oversized version of the 194 LEDs for the two under the dash, and the trunk in my case also. 921-W18-T part number
You have the metal clip style, which GM had from 91-94. 95-96 got the plastic upgrade. I’m pretty sure the mercury switch went away in 94 as well and went to the ball tip style.
I’ll look for some of the 194s! Thanks for the tip. I like light when I’m trying to see what I’m doing at night.
My reverse bulb twisted apart and the socket is still in the housing. Any tips on how to get them out?
Needle nose pliers.
For the link for the mirror light nothing pop up I’m having trouble finding LEDS for the mirror light
Try looking on eBay for t5 LEDs
Did you have to adjust the bulbs when you put in the new headlights? I just put in LED’s and i can’t see shit
Thanks for the comment. I had to tweek the passenger side a touch, but other then that it lined up. What brand are you using?
What are the size of those flashers. I ordered leds and I got the same problem the signal light is stuck. Also the size for the reverse light is that the same as flashers?
Just the normal flashers. Part 2 video, you’ll see you’ll need resistors as well. I found Walmart sells them, but I listed the part numbers of the ones I used on my part 2 video.
@chris kowalewski where did you get those adjustable led flasher relays?
Got them on EBay. Link should be in the video description.
@@Twostallgarage thanks I was the square adjustable ones I was asking about but I found the link in your other video thanks for the response keep up the impala videos
Those older lights, if you take them off hot, they burn your finger prints off...
Agreed!