Hey I’ve contacted speed engineering to see if they have a bolt on system for my 96 Camaro and they said they don’t but I could customize one for the 98 and newer Camaros to fit on mine . How did you go about Installing on on your Camaro ?
@@joshhurst5649 only thing you have to fabricate is the driver side exhaust pipe that goes to the header. The rest of the exhaust fits perfect. I only cut about 7 inches off the exhaust pipe used a 3inch ID ADAPTER (STAINLESS OF COURSE) TO GET THE PROPER ANGLE I NEEDED TO MEET UP WITH MY DRIVER SIDE HEADER.
So easy man! I think i had everything off in probably 2-3 hours and then the headers probably took me 2.5 hours, the trick is to get the car as high off the ground as possible. The rest of the exhaust took me about an hour
@EmmittMAKNHP its pretty noisy around town and when your getting on it. But when im cruising on the highway there is almost zero drone and i can have a normal conversation
@@pschedelicpapa yeah that’s what I heard as well and was gonna go with the 1 3/4 myself. Have any issues fitting the headers up in there? Thanks for the reply, car sounds great!
@@dawson2552 No issues at all man. You do have to get the car high off the ground. That's why it's on blocks in the video. But other than that they just slide right in
Lmao my girl finna say the same thing once I get my new car 😂
Just did the same to my 95 camaro cammed lt1. The exhaust deff brought out the cam lope😊. Sounds good.
Hey I’ve contacted speed engineering to see if they have a bolt on system for my 96 Camaro and they said they don’t but I could customize one for the 98 and newer Camaros to fit on mine . How did you go about Installing on on your Camaro ?
@@joshhurst5649 only thing you have to fabricate is the driver side exhaust pipe that goes to the header. The rest of the exhaust fits perfect. I only cut about 7 inches off the exhaust pipe used a 3inch ID ADAPTER (STAINLESS OF COURSE) TO GET THE PROPER ANGLE I NEEDED TO MEET UP WITH MY DRIVER SIDE HEADER.
Thanks
Sounds fabulous! I just picked up an 01 and I am considering the Speed Engineering exhaust. How difficult was the install? Were the headers a pain?
So easy man! I think i had everything off in probably 2-3 hours and then the headers probably took me 2.5 hours, the trick is to get the car as high off the ground as possible. The rest of the exhaust took me about an hour
Thanks for the response. Is it really loud just driving around normally? Any drone to it?
@EmmittMAKNHP its pretty noisy around town and when your getting on it. But when im cruising on the highway there is almost zero drone and i can have a normal conversation
@@pschedelicpapa Thank you.
Fucking bad ass car i wish i can have one some day
are you stock cam?
Yes sir
Sounds great! Been looking at getting the same setup for my Camaro. 1 7/8 or 1 3/4 headers?
I went with 1 3/4 because some people have fitment issues with the 1 7/8 hitting the k member.
@@pschedelicpapa yeah that’s what I heard as well and was gonna go with the 1 3/4 myself. Have any issues fitting the headers up in there? Thanks for the reply, car sounds great!
@@dawson2552 No issues at all man. You do have to get the car high off the ground. That's why it's on blocks in the video. But other than that they just slide right in
I have this exhaust on my hci Camaro