I understand and appreciate your step by step video to disassemble and repair printer by changing the entire power module. But for me to read "easy to solve" and find a 29min video + having to open the entire box and buy a power module, well, that's not coherent at all. Just a suggestion: better to use a simple but descriptive title as "how to disassemble Brother DCP-T310 and fix #Nopower". Thank you for sharing.
@@technicaljasis, that you haven't improved our knowledge. I have a blown Brother power supply that requires repair and am looking for knowledgeable support.
Hello, the same thing happened to me, after several consecutive cleanings the machine when I connect it only lights up the home house and the screen lights up blank and does nothing, I have also changed the supercapacitor and nothing, could you tell me how solved the problem? grateful for your response greetings. you can see my problem here: th-cam.com/video/7wyRnGHs6Oc/w-d-xo.html
@@technicaljasis ok, can you reply me a solución?, I just change the PCB, heads printer and touchscreen of another like this but this is not the problem all is ok on the other printer. Help me please
@@technicaljasis hello, I have changed the power supply too ( I have another printer like that) but not start, reply me if you can an idea at respect. bye
bumili ka ng d kalidad na tester mesr 100 no need na kalas ung capacitor at resistor by tolerance ang reading easy as 123 dahil tester na mismo ang nag sasabi na kung sira na ung parts kailangan mo lang gawin basic electronics kc pag high tolerance e pa read nya sa iyo ang value at don sa mga parts na d alam google part number data sheet makita mo ung laman sa loob ng chips lalo na ung mga walong paa basic electronics gamit ang google para sa parts na d alam at mgandang tester go for repair
I understand and appreciate your step by step video to disassemble and repair printer by changing the entire power module.
But for me to read "easy to solve" and find a 29min video + having to open the entire box and buy a power module, well, that's not coherent at all.
Just a suggestion: better to use a simple but descriptive title as "how to disassemble Brother DCP-T310 and fix #Nopower".
Thank you for sharing.
Y yo pensando que era el mas arrastrado y falto de pulso, me tiraste al diablo maestro, te felicito.
GOOD TICHING KARTE HO AP THANKS 👌🌹😆😂😆😂👌
Brother dcp t310 supply me konsa number transition laga hai
Is video ke jariye maine ek printer ka powar supply sahi kiya
good
thanks
You're welcome!
ok. new power supply naman ung nilagay..but anyway thanks sa pagpakita kung paano magdismantle.
So what you really change? Because give no description about what you measure, what you do , the music doesnt help, so what you really teach here ?
So, what did you replace in the end? We saw lots of fiddling but nothing to improve our knowledge.
what is your problem
@@technicaljasis, that you haven't improved our knowledge.
I have a blown Brother power supply that requires repair and am looking for knowledgeable support.
@@themlotproductions It looks like that he replaced the Fuse, Capacitor, small Diode and the big one
magicion
piece of cake
Ingay ng back ground mo idol?nakakadisatention?
Did you just remove the defective capacitor?, i have the same brand printer and problem please help
whats your problem
@@technicaljasis no power sir
@@jaderielcontreras7559 check the switching ic first
@@technicaljasis how sir
sir mera bhi same problem hai kaha thik hoga
paps napalitan ko na ung power supply, bakit wala pa rin power? saan kaya ang sira nito? tnx
No power -on# Brother DCP-510
Did you get any solution?
A power supply complete Kahan Milega
Pipe kb?
How can i repair it in home ..
Did exchange new board bro. on 14:22 /14:24 ?
Magkano po damage nyan?
magkno po mag pagawa ng printer ayw nya n PO mgopen wla n pong power
benjinjilan
Hello, the same thing happened to me, after several consecutive cleanings the machine when I connect it only lights up the home house and the screen lights up blank and does nothing, I have also changed the supercapacitor and nothing, could you tell me how solved the problem? grateful for your response greetings. you can see my problem here: th-cam.com/video/7wyRnGHs6Oc/w-d-xo.html
Thanks for sharing
@@technicaljasis ok, can you reply me a solución?, I just change the PCB, heads printer and touchscreen of another like this but this is not the problem all is ok on the other printer. Help me please
@@technicaljasis hello, I have changed the power supply too ( I have another printer like that) but not start, reply me if you can an idea at respect. bye
@@leongarciadel replace main PCB
Q
How to fix stuck up
ok sir
puro tanggal walang video ano ang ni replace or paano pagbalik sa mga nasira...
wala man lang explanation.
bumili ka ng d kalidad na tester mesr 100 no need na kalas ung capacitor at resistor by tolerance ang reading easy as 123 dahil tester na mismo ang nag sasabi na kung sira na ung parts kailangan mo lang gawin basic electronics kc pag high tolerance e pa read nya sa iyo ang value at don sa mga parts na d alam google part number data sheet makita mo ung laman sa loob ng chips lalo na ung mga walong paa basic electronics gamit ang google para sa parts na d alam at mgandang tester go for repair
@@poginani7951 paps, pag umiilaw means shorted sya? Yun sa tester nya Kasi.
BS video. No useful info here
Thanks for the view
Thanks
Welcome
Thanks
Welcome