What spot did plug the fuse into the fuse box im having the same problem with a 2015 must manual 6 speed its not changing voltage no matter if i have the clutch pushed in or it let out reads 5.00volts all the time
Bad ass car! glad you got it figured out! I ordered my N2mb wot box about a month ago was having problems with it only 2step and not cutting ignition when wot shifting turns out I was sent a single feature old style box sent it back they send me a new box and now Mercia! Lol looking forward to more content 🤙🏼
@@eduardomendez292 emailing back and forth with N2mb trying to find out the problem at the end sending my wot box in they emailed me the problem and sent me a new one 🤓
This mighy be the answer I was looking for in my mazda. For whatever reason it refuses to read my clutch. Ive tried tapping into the clutch position switch and the cruise control switch on the clutch. Nothin on either. Im reading throttle position fine and it seems all other connections are working since when I unplug the box my car wont start
@@paralyzdgranny8174 I forgot to hit the button that programs your desired functions into the wot box. I also ended up putting all my ignition signal wires to my red and orange wires. I no longer have the wot box though its now in a volkwagen golf
@@chickenfixn4439 yeah I tried putting it in my 02 protege but it threw off my timing, burned a coil pack and now my tps isn’t working. I had everything connected correctly but I couldn’t set the rev limiter or figure out how to 2step it
Hey man, I have a 10r80 as well. My n2mb just got hooked up, everything is in but it still wants to 2 step when I hit full throttle in drive. I need it to work with my transbrake.
How can I get in touch with you about it, I’m ready to get it hooked up on my A10. I finally made it to the track with my sleeper kit, trapped 139 on 7psi
TenSecond408 the trans brake is a wire in. hit the button and it works the only thing you need to do with the tune is remove the codes that it throws when you hit the button lund will write out them sensors or codes
10R80 Daily as far as I know MSD doesn’t have a direct plug and Play for the 18 19’s and there’s some people out there that have some bad luck running the late 16 through 17 part number 87311 with blowing there engines
ThatsMeanAs we are manipulating the trans with three relays. it’s a simple wire in to factory trans harness. i’m thinking i’m going to make a video on it
Hopefully your finally rounding the corner and able to start having fun and get to the track!
What spot did plug the fuse into the fuse box im having the same problem with a 2015 must manual 6 speed its not changing voltage no matter if i have the clutch pushed in or it let out reads 5.00volts all the time
Bad ass car! glad you got it figured out! I ordered my N2mb wot box about a month ago was having problems with it only 2step and not cutting ignition when wot shifting turns out I was sent a single feature old style box sent it back they send me a new box and now Mercia! Lol looking forward to more content 🤙🏼
How did you find that out?
@@eduardomendez292 emailing back and forth with N2mb trying to find out the problem at the end sending my wot box in they emailed me the problem and sent me a new one 🤓
@@BoostaholicRacing nice nice. We had some issues. Used a different pc to re-configure the wot bot and it works!
Need help 2018 Mustang gt. When 2step activates for 3 sec and release the car will miss fire for a couple secs
Do a video on install of trans brake and 2step there is not a video anywhere
Can you make a video on the install I really wanna do this to my 18 A10
Is the trans built ? If so what valve body are you running and power numbers
This mighy be the answer I was looking for in my mazda. For whatever reason it refuses to read my clutch. Ive tried tapping into the clutch position switch and the cruise control switch on the clutch. Nothin on either. Im reading throttle position fine and it seems all other connections are working since when I unplug the box my car wont start
You ever figure it out?
@@paralyzdgranny8174 I forgot to hit the button that programs your desired functions into the wot box. I also ended up putting all my ignition signal wires to my red and orange wires. I no longer have the wot box though its now in a volkwagen golf
@@chickenfixn4439 yeah I tried putting it in my 02 protege but it threw off my timing, burned a coil pack and now my tps isn’t working. I had everything connected correctly but I couldn’t set the rev limiter or figure out how to 2step it
Hey man, I have a 10r80 as well. My n2mb just got hooked up, everything is in but it still wants to 2 step when I hit full throttle in drive. I need it to work with my transbrake.
what was the solution with this? im having same issue
@@nickfranco3051 I have yet to find one. i just use transbrake without 2 step
Wired wrong
Going to release any information on how your did your transbrake? Can’t wait to see what it does at the track!
TenSecond408 thinking about doing a video on it. it’s not to hard
How can I get in touch with you about it, I’m ready to get it hooked up on my A10. I finally made it to the track with my sleeper kit, trapped 139 on 7psi
Boosted Addictions Did Lund have to make tune changes to calibrate for the transbrake ? Or can it just be wired in and good to go? Thanks
TenSecond408 the trans brake is a wire in. hit the button and it works the only thing you need to do with the tune is remove the codes that it throws when you hit the button lund will write out them sensors or codes
@@BoostedAddictions Where does the yellow wire off the WOT Box go for the 2019 gen3 . What color wire/pin# ?top middle or bottom ecu plug?
I’m having the same issue on my Supra. I would be sitting at .94.
How did you wire up the trans brake to be inactive?
bobby bouche i put the TB trigger wire on a switch. With the switch off no signal goes to the TB relays with switch on it triggers relays
@@BoostedAddictions Right, so i assume youre running a switch on the power side of the relays and a seperate power source to the wot box green?
bobby bouche yes that’s right
Glad you figured it out! What made you use the N2MB over the MSD 2 step? Does Lund recommend it over the MSD?
10R80 Daily as far as I know MSD doesn’t have a direct plug and Play for the 18 19’s and there’s some people out there that have some bad luck running the late 16 through 17 part number 87311 with blowing there engines
where do you get the button you have?
Now get it to the track with the cooler temps :)
working on it need to change out this trans cooler first and we are there
Awesome. I never even knew this existed. 🔥
What wire did u hook up the yellow wot box wire to
Is it possible to install a wot box on a gen1 ford raptor?
Awesome man, one step closer 👍
What did you connect the green wire
what resistor did you use? i need to do this
Good job. Your car sounds nnnasty with the two step on.
How do you make the 2step faster mine is slow
Does your car have an actual clutch?
If Jesus was a man
What transbreak are you using?
ThatsMeanAs we are manipulating the trans with three relays. it’s a simple wire in to factory trans harness. i’m thinking i’m going to make a video on it
New Sub:
Sick Mustang man! Just found the channel.. care if I follow you through this journey!🧤😎
hell yes