Just a heads up: putting OpenTabletDriver in the osu! folder can have unintended effects, since the built in updater has moved unrelated files when updating in the past. It's best to put it in its own folder as the installation guide suggests.
i have a problem with the cursor, it goes to the top corner and after watching this video, im very happy bcuz i know where's the problem is, thank you so much mr jaeky! :)
Really informative and quick, thank you for that. I didn't actually received my tablet yet because of the delivery time but I'll come back to this video to already get a base configuration and not have to worry about whatever the default configuration is. I'll try to find more info on the smoothing part because it looks like something you need to ajust according to you and the tablet/pen and not copy paste everyone else settings
you could use the rotate setting to change the angle i use it because my tablet is like 3 times bigger than most of the osu tablets so i use my tablet vertically
I made my display ONLY display on the 1st monitor and it still lets me move to the 2nd monitor and i set my tablet area to something smaller and it still lets me use the whole tablet.
@@zoebencharski5341 I have resolved my issue, make sure you don't have 2 tablet drivers. After deleting my unused driver and restarting my pc, my tablet seems fine to this day. I'm using a Gaomon S620 with OpenTabletDriver
I downloaded and edited the mapping in the driver but the tablet still treats it as it the entire tablet is being used despite being only a small mapping.
@jaeky 9:02 He's definitively talking about rotating the area 180 degrees ^^ This can be achieved by right clicking the area, hovering over to the "flip" tab and then clicking "vertical" or "handness" The person asking this question's probably a CTL472 owner and/or probably left handed Source: CTL472 owner + left handed. The wacom drivers (on their latest releases) added an area orientation setting to sorta "fix" this issue PS: this wouldn't be a problem if the cable was longer (like the one found on the CTL/CTH480) and placed the usb port on the top rather than on the side...
doesn't work for me, i turned lock aspect ratio off and on and it still does, i turn on lock to display and it doesn't and when i try and change the area it stays as the first area i put.
I found this video pretty helpful its been a while playing OSU! feels good again. I have one issue when im playing sometimes my curser studders trying to hit jumps. Im using the same filter and settings. instead of width 75, I found width 70 to be my sweet spot and I use the same height. I'm using the Wacom CTL 4100 any recommendations to fix the random studder issues (almost feels like the curser stays in one place for a split second) EDIT: I think I found the solution myself. I had my tablet plugged into usb 2.0 port, plugged it into 3.0 all seems well.
the driver doesnt detect my tablet unless i unplug it and plug it back in, then it gives me a little guide and closes after im done clicking through it, is there a fix for this?
I know I am super late, but I have a problem! whenever my tablet detects my pen, the cursor starts shaking like crazy. adding antichatter/latency made it worse, it continued shaking AND it started having a huge tracking delay along with the cursor randomly teleporting to other places on my screen. Please help!
Usually I use my wacom tablet to draw and play osu, In order to use this new driver for my osu game, I have to uninstall the wacon drawing tablet driver which is better for drawing. Is there a way to solve this other than having to uninstall and reinstall all the time?
hello I need help I keep experiencing a weird double click like my cursor has a ghost like cursor following it and it prevents me from clicking on the thing I want to when hovering with the solid cursor. How do I fix?
the same problem, the stock driver works, but the opendriver and the driver from hawku do not want to recognize the tablet so that it does not do if you find a solution, I will be grateful if you help
Hello. My tablet is stuck on like one line and doesn't go into the corners like how I want. I'm not sure why it doesn't use the whole area it's basically set to one setting and I can't reach notes in the corners.
Just thanks helped me to get a real area and improving more because i now play with my tablet how every good osu! player plays with an tablet and not how i did used it like a mouse
By left handed/right handed, they mean rotating the tablet area by 180°. You can do that by right clicking your tablet are and selecting Flip > Handedness
Hello, everything went almost right in the tutorial, but when I enter the OSU and move around the tablet, a second cursor appears quickly, could you tell me what it would be ?? my tablet is a WACOM CTL-480-3
i did the same exact thing as the tutorial showed. it works when I open the driver but if I try to move my pen on the tablet, it says, "Lost connection to daemon, exiting..." and then the driver closes. does anyone know how to fix this? ty
*HELP* i uninstall wacom driver before using this but it still doesn't detect my tablet. Under Console one message says "Another tablet driver found: Wacom" i don't know what to do please help
For some reason the driver only detects my tablet when it is ran at is an administrator. However, I can't use plugins/filters. Is there any way I can fix this?
My tablet worked with your video, but with my second monitor it doesnt. I set it to my main monitor and its stuck on a half of my monitor. When i set to the other one its also stuck, but on the other of the monitor. I can put it in the mid of both ones but it feels like my sens is another one when i press play a map, but when not its completely normal.
im experience gliches like when im playing a map the cursor glitch and a ppear 2 cursors and the sensetivity automatically increase and decrease at the same time. i had delete and reinstall back, try increase the antichatter strength which made it worse and also using the actual area of the tablet still does not work. how to fix this issue??
PLS HELP! if the software is opened, my tablet wont work on osu but if it was closed, it worked but the software settings is not applied.. my tablet is XP-PEN g640 but it said it was compatible..
hey a little late but i have a wacom ctl472 and i have this problem that when i move the pen the cursor doesn’t go with it it’s like it have a little lag or something, need help
i need help i have the display in the driver set to my main monitor on the right but ever time i put the pen driectly on the tablet it the right or left
No matter what I do no tablet driver will override windows 11 default tablet settings and I can't figure out how to disable/uninstall windows shenanigans, any help?
I can only use one site of my monitor ingame, its like an invisible wall in the middel so my cursor cant move any further. how do i fix that? And it permanently scrolls down in the song list so i cant select any maps.
Just a heads up: putting OpenTabletDriver in the osu! folder can have unintended effects, since the built in updater has moved unrelated files when updating in the past.
It's best to put it in its own folder as the installation guide suggests.
why would anyone want to put it in the osu folder anyways 🤣
@@p1ayM0NKEY 74k views good chance one of them isn't the brightest tool in the shed
plus where here for osu we all kinda special
my pen button on my wacom ctl 472, like when i click it doesnt work
@@DeontologicalConsequentialism who use pen button 💀
was watching this out of boredom and u are such a patient person lmaoo
Extremely informative! First time using a pen table and ready to start playing OSU!
Huge kuddos c:
kudosu!
i have a problem with the cursor, it goes to the top corner and after watching this video, im very happy bcuz i know where's the problem is, thank you so much mr jaeky! :)
how did you fix it because I'm having the same issue?
@@rim314 turn off raw input on the mouse section
@@rim314disconnect your tablet and reconnect
Really informative and quick, thank you for that.
I didn't actually received my tablet yet because of the delivery time but I'll come back to this video to already get a base configuration and not have to worry about whatever the default configuration is. I'll try to find more info on the smoothing part because it looks like something you need to ajust according to you and the tablet/pen and not copy paste everyone else settings
For those about right handed and left handed go to rotation and set it 180
your the goat for that
thanks!
didnt work
THANK YOU SOO MUCH the cursor when i was using my tablet was stuck at the corner, thank you for helping me!
Same
That’s because you did/didn’t have raw input enabled
when i have it on it does it
@@Wafflasy
Very well organized!! Nice video
the perfect timing doesn’t exis-
you could use the rotate setting to change the angle i use it because my tablet is like 3 times bigger than most of the osu tablets so i use my tablet vertically
THIS WAS THE PERFECT VIDEO.. and it came out the literal day my s620 arrived
Do you still play ?
I made my display ONLY display on the 1st monitor and it still lets me move to the 2nd monitor and i set my tablet area to something smaller and it still lets me use the whole tablet.
same prob
@@remi_qant same
@@zoebencharski5341 I have resolved my issue, make sure you don't have 2 tablet drivers. After deleting my unused driver and restarting my pc, my tablet seems fine to this day. I'm using a Gaomon S620 with OpenTabletDriver
My pc won't let me open this driver anymore.
It used to let me open the driver but now it doesn't
7:04 can also happen when you dont use 1.0 sens ingame
my cursor in the game is flashing back and forth between top left corner and the middle of where i am dragging my pen
I downloaded and edited the mapping in the driver but the tablet still treats it as it the entire tablet is being used despite being only a small mapping.
Did you ever fix it? If so how
thank you bro. straight and to the point - love it!
when i set my area for my my tablet i save and apply and it wont go faster and makes me move across my entire tablet :im using a wacom 472
@jaeky 9:02
He's definitively talking about rotating the area 180 degrees ^^
This can be achieved by right clicking the area, hovering over to the "flip" tab and then clicking "vertical" or "handness"
The person asking this question's probably a CTL472 owner and/or probably left handed
Source: CTL472 owner + left handed.
The wacom drivers (on their latest releases) added an area orientation setting to sorta "fix" this issue
PS: this wouldn't be a problem if the cable was longer (like the one found on the CTL/CTH480) and placed the usb port on the top rather than on the side...
Thanks dude I couldnt find anything that actually helped. youre great
Excellent, thanks my man.
Everything worked as intended the first time.
doesn't work for me, i turned lock aspect ratio off and on and it still does, i turn on lock to display and it doesn't and when i try and change the area it stays as the first area i put.
I found this video pretty helpful its been a while playing OSU! feels good again. I have one issue when im playing sometimes my curser studders trying to hit jumps. Im using the same filter and settings. instead of width 75, I found width 70 to be my sweet spot and I use the same height. I'm using the Wacom CTL 4100 any recommendations to fix the random studder issues (almost feels like the curser stays in one place for a split second)
EDIT: I think I found the solution myself. I had my tablet plugged into usb 2.0 port, plugged it into 3.0 all seems well.
had the same problem with my wacom ctl 4100wl and i use your solution, it wored well, thanks for the solution
I have this problem, I use two keys two click on my keyboard but only one works. Can someone help me?
nvm I fixed it:)
Thank you so much for the tutorial.
I'll keep practice using my tablet for drawing and playing osu and be better!
A tablet isn’t going to make you better if anything it will make you worse 😂
if that was true the top players would use a mouse
@@tazyt08
@@tazyt08 i mean if you look at the top 1000 you'll see the percentege of the tablet users soo what's your point here?
thank you for this setup. helps me getting use deco fun xs in no time.
I really Like your voice it is so calming
8:58 for me i have to enable map absolute raw input to osu, otherwise it does that
Thank you so much for this guide! I can finally use my tablet now for Osu :)
what am i suppose to do then my tablet is supported but it says "Requires Zadig's WinUSB to be installed on interface 0"???
Thank you so much, everything was simple and clear and your suggestions very helpful
the driver doesnt detect my tablet unless i unplug it and plug it back in, then it gives me a little guide and closes after im done clicking through it, is there a fix for this?
for some reason when i use tablet i have two cursors, and they keep disappearing and reappearing for some reason, do you have a fix to this?
yea me too
Thanks for this video. Helped me setup my very first tablet.
You are amzing i love you for this guide
I know I am super late, but I have a problem!
whenever my tablet detects my pen, the cursor starts shaking like crazy.
adding antichatter/latency made it worse, it continued shaking AND it started having a huge tracking delay along with the cursor randomly teleporting to other places on my screen.
Please help!
me too!!
i fixed it by exiting all the tablet drivers in hidden icons tab and restarting it
@@mattika what do you mean? I'm a bit confused (I'm a visual learner so it might be tough for me to understand)
even when i set my tablet area to smth smaller it just ends up working the same as full screen, how can i fix this?
Usually I use my wacom tablet to draw and play osu, In order to use this new driver for my osu game, I have to uninstall the wacon drawing tablet driver which is better for drawing. Is there a way to solve this other than having to uninstall and reinstall all the time?
Good for you the wacom tablet driver can be used but mine isn't, it tells me that its uninstall.exe is missing :/
thank you very much!!!!!
Did everything but my pen keeps glitching and a phantom arrowhead pops up and keeps flashing, everytime i tap, it acts as a double tap
hello I need help I keep experiencing a weird double click like my cursor has a ghost like cursor following it and it prevents me from clicking on the thing I want to when hovering with the solid cursor. How do I fix?
how i know where is my old driver, and how i can uninstall the old driver, pls help
Ive been have some issues with the software i changed my tablet size and its the same speed for each size i put, any fix?
same did u fix this issue?>
this was a big help thanks
thx bro it helped good guide
Does this work with every tablet
I got the Gaomon s620 and it not detecting and i did all methods.
the same problem, the stock driver works, but the opendriver and the driver from hawku do not want to recognize the tablet so that it does not do if you find a solution, I will be grateful if you help
keeps saying that it has a virus and automatically gets deleted if i turn it off to download the moment i turn it back on it gets delete
Hello. My tablet is stuck on like one line and doesn't go into the corners like how I want. I'm not sure why it doesn't use the whole area it's basically set to one setting and I can't reach notes in the corners.
when i open obs or some other like application the tablet just stops working, if i alt tab to like chrome or sth it works again
well my tablet is not supported by open tablet driver so I don't know what to do.
how do you click without the pen?
f10 if you want not to click when playing osu (must press f10 when you are IN osu! lol)
Just thanks
helped me to get a real area and improving more because i now play with my tablet how every good osu! player plays with an tablet and not how i did used it like a mouse
Everytime i close my tablet driver it doesnt move anymore?
My tablet is supported, all my drivers were deleted and redownloaded again multiple times and still won't show up
i literally just cant get it to detect for some reason. ive tried uninstalling the original driver but it still doesnt work
W guide, W mans. Thank you
I tried to download it, it allows me to uncompress the file but it shows error when I open it. How do I fix this?
i have the huion 420, it says it recognizes my tablet and everything but my tablet still wont move on screen. Why???
By left handed/right handed, they mean rotating the tablet area by 180°. You can do that by right clicking your tablet are and selecting Flip > Handedness
wouldnt flipping the rotating just make it inverted not left handed?
@@vertic333 my bad, should have clarified. It's only inverted horizontally
@@Pearoo haha its all good, i'm just weird and like to practice with my left hand. thank you though
so whenever i use my pen my cursor tends to teleport and glitch, but when i hold one of the pen buttons down it stops this. any suggestions?
@jaeky
set it up and kept it minimized, nothing happened though and the tablet remained the same. any fixes? (yes i opened the thing that opens console)
when im in desktop my cursor moves but when i go to osu my cursor isn't moving
what if my tablet isnt supported tf do i do
so when i open ,,OpenTabletDriver,, it keeps telling me to download NET or kind of things. is that normal?
You need the net desktop realtime x64 to run the software
Yo thx a lot, the filter u are using is so good ! I was using Hawku noise filter, but yours is perfect ! (my acc is gonna step up a lot)
Whenever I change my tablet area it will glitch my mouse and make it go back and forth really fast I don’t know how to fix?
Hello, everything went almost right in the tutorial, but when I enter the OSU and move around the tablet, a second cursor appears quickly, could you tell me what it would be ??
my tablet is a WACOM CTL-480-3
idk why but i setup my tablet but i can still use the whole tablet und both monitors but i set it up in the settings any suggestions?
when i try to move my pen to the left it stays in the middle
i did the same exact thing as the tutorial showed. it works when I open the driver but if I try to move my pen on the tablet, it says, "Lost connection to daemon, exiting..." and then the driver closes. does anyone know how to fix this? ty
why OpenTabletDriver.Daemon always tell me '' No tablets were detected.'' can anyone help me
*HELP*
i uninstall wacom driver before using this but it still doesn't detect my tablet. Under Console one message says "Another tablet driver found: Wacom" i don't know what to do please help
none of my settings apply, my area stays the same even after saving and applying (in osu)
could i still draw with these drivers installed?
Hello i need some help i watched the video and for me in game apeares scretches how can i off that in game ?
Would you reccomend switching to otd , i just bought my tablet and i installed the wacom one which is the manufacturer one
For some reason the driver only detects my tablet when it is ran at is an administrator. However, I can't use plugins/filters. Is there any way I can fix this?
For some reason when I tried all the methods to have the osu pen connect but it still doesn't connect can you help?
Anyone know how to manage the cursor movement when it's feel very heavy,One time i overaim but don't direct it too strongly
i need helpt, even if i have my tablet width and height SUPER small like 2mm each it still only goes the full tablet length (i use Gaomon S620)
My tablet worked with your video, but with my second monitor it doesnt. I set it to my main monitor and its stuck on a half of my monitor. When i set to the other one its also stuck, but on the other of the monitor. I can put it in the mid of both ones but it feels like my sens is another one when i press play a map, but when not its completely normal.
my tablet cant be flipped around cable is too short so hawku provides mirrored area and open tablet driver doesnt
Thanks this was useful
when i save and apply my new area for my sense it doesnt change how do i fix this?
im experience gliches like when im playing a map the cursor glitch and a ppear 2 cursors and the sensetivity automatically increase and decrease at the same time. i had delete and reinstall back, try increase the antichatter strength which made it worse and also using the actual area of the tablet still does not work. how to fix this issue??
why wont it open? i have tryed to open it like 9 time and its not opening what should i do?
my sens is so slow if i put to 1x in game and i tried making my size smaller but it don't change anything?
PLS HELP! if the software is opened, my tablet wont work on osu but if it was closed, it worked but the software settings is not applied.. my tablet is XP-PEN g640 but it said it was compatible..
hey a little late but i have a wacom ctl472 and i have this problem that when i move the pen the cursor doesn’t go with it it’s like it have a little lag or something, need help
i need help i have the display in the driver set to my main monitor on the right but ever time i put the pen driectly on the tablet it the right or left
which are the best filters?
No matter what I do no tablet driver will override windows 11 default tablet settings and I can't figure out how to disable/uninstall windows shenanigans, any help?
thx this help me a lot.
Hello I am switching from mouse to tablet but my tablet cursor doesnt move and not sure what to do. Help please.
How do you actually plug in your tablet to your computer?
I can only use one site of my monitor ingame, its like an invisible wall in the middel so my cursor cant move any further. how do i fix that? And it permanently scrolls down in the song list so i cant select any maps.
my setting that I have in otd doesn't effect osu it looks like it does nothing to osu
Anyone know why my drivers aren't detecting my tablet?
Are there better drivers than this one? Since this video is 2 years old im just curious