Hi Sebastian, excellent idea, great job. I've looked for pipe clamps with these special release levers, but I didn't find. Could you please tell us the product name and where we can get them? TIA Hans
Hi Hans! Sadly i can’t tell you the brand because i bought it in a local hardware store and they have no labeling on them (pretty sure it comes from China)
Also, it seems Harbor Freight 1/2" pipe clamps are coming with the same release. The pic on their site is not very clear, but this seller on Ebay shows the same HF clamp for sale and it looks like the one Ollari is using (check out the pictures) www.ebay.com/itm/1-2-Pipe-Clamp-Item-03813/323923300723?hash=item4b6b555173:g:LXsAAOSwYftdhgT1
I like the quick release that you built into the tail pieces in your vise. I plan on building a Moxon vice using pipe clamps in the near future. I think I will incorporate this imto my build. Thanks!
4 ปีที่แล้ว +4
Hello my friend. You have created a nice pipe clamp vise for the bench. Good idea. **It's nice to create and share a variety of ideas to help many people. Congratulations** ....
I've been looking at a dozen similar videos lately, but I may like this one the best. Normally I like plenty of instruction, but your workflow made it dead simple to follow and the music made the time pass way faster than it should have. With that 3 layer lamination of the plywood I bet it feels solid as a rock when sawing and mortising. Nice work, we appreciate the ideas.
Right-on, an easy to make moxon vise with quick release, using available parts for the trickiest portion of the release mechanism. Cool, it's the version I'll be building for my bench.
Super gemacht! Vor allem das mit dem Hebel, dass man die Rohre herausziehen kann ist super! Andere TH-camr Reden lange um den Brei und du machst einfach ohne zu Reden und das gefällt mir so, weil man viel schneller ist. Es gibt auch einen TH-camr, dessen Name ich nicht sagen will, der lobt sich immer selbst und meint nur er sei der beste Bastler! Mach weiter so und bleib so wie du bist. LG aus Bayern.
Amazing idea and design, love your manufacturing of your new vice. Thank you for sharing your amazing story. Be careful and safe. God bless you and your family.
Amazing idea! Funnily enough, I just received 4 of those pipe clamps and was looking for a vice option. Thank you, definitely going to build this, too!
Very nice job. I love the release system you got going there. I've seen these in the past and I always thought this would be a pain until now. Well done
Built one of the "poor man's vice" a couple years ago, have to adjust individual clamps, love your single lock release, will definitely integrate your design into my vice. Thanks for the video and design idea
3:09 why does everyone route out the tail pieces here ? I’ve never understood this especially since it’s so easy to drill through and mount. I ask bc I want to know what I’m missing as i didn’t do this with mine and always have been curious haha
Excellent DIY Bench Vise! One question.... I've never seen anyone do a free-hand router cut like that. How were you able to see the pattern lines under the router with all the wood chips flying off? Even more amazing is how precise the cut fit the clamp. Well done!
I'd a bet money you were going to make it foot released so you could use both hands retracting the moveable jaw. That's what mine will have...when I get around to building it. Nice job.
Hi. First of all I loved the idea. I wanted to ask you what is the name of the screw you used to do it. I am from Argentina and wanted to know how to find it here. From already thank you very much. Martin.
For all the rest of you wondering where in the well do I find these bar clamps with the very unique little pull release lever they are available on Ebay and ?
@@Ollaris The nails I get. I'm saying the nails were probably enough. Most of the tools you used here are pretty inexpensive, but that's still like $100 worth of clamps
Turns out there's a really good reason this style of pipe clamp is hard to find. They don't work consistently. I just spent about a month designing the upgrade of my work bench, collecting parts about $150 worth of parts, and building it only to find that the damn vise doesn't hold. WHATEVER YOU DO, THINK OF ANOTHER WAY to build a big moxon vise. I'm not blaming "Ollari", because his clamps probably worked fine. ALSO, drilling holes in those levers is nasty because they're hardened steel - not mentioned by Ollari, btw. After crying in my soup for quite a while, I'm going to rebuild, this time with vise screws from Amazon or Lee Valley. I'm going to lose the quick-release feature, but there is no work-around for the damn pipe clamps not holding. I am so annoyed.
Great idea on this, is there anyone who knows where to buy/source these type of pipe clamps in the uk? The lever release is unusual and difficult to find.
Hi Sebastian, excellent idea, great job. I've looked for pipe clamps with these special release levers, but I didn't find. Could you please tell us the product name and where we can get them? TIA Hans
Hi Hans! Sadly i can’t tell you the brand because i bought it in a local hardware store and they have no labeling on them (pretty sure it comes from China)
@@Ollaris Thanks anyway!
@@hajot54 www.ebay.com/itm/Lot-of-8-Pipe-Bar-Clamps-1-2-and-3-4/124181766388?hash=item1ce9cf60f4:g:bvkAAOSwExVetxSW
Also, it seems Harbor Freight 1/2" pipe clamps are coming with the same release. The pic on their site is not very clear, but this seller on Ebay shows the same HF clamp for sale and it looks like the one Ollari is using (check out the pictures)
www.ebay.com/itm/1-2-Pipe-Clamp-Item-03813/323923300723?hash=item4b6b555173:g:LXsAAOSwYftdhgT1
They look very similar to ones sold at harbor freight (at least the release mechanism does).
One of the many things I appreciate about your channel is your creativity and new ideas you come up with. Well done!
Thanks a lot Dan! I really appreciate it!
I like the quick release that you built into the tail pieces in your vise. I plan on building a Moxon vice using pipe clamps in the near future. I think I will incorporate this imto my build. Thanks!
Hello my friend.
You have created a nice pipe clamp vise for the bench. Good idea.
**It's nice to create and share a variety of ideas to help many people. Congratulations**
....
Thank you 😊
I've been looking at a dozen similar videos lately, but I may like this one the best. Normally I like plenty of instruction, but your workflow made it dead simple to follow and the music made the time pass way faster than it should have.
With that 3 layer lamination of the plywood I bet it feels solid as a rock when sawing and mortising. Nice work, we appreciate the ideas.
Right-on, an easy to make moxon vise with quick release, using available parts for the trickiest portion of the release mechanism. Cool, it's the version I'll be building for my bench.
Super gemacht! Vor allem das mit dem Hebel, dass man die Rohre herausziehen kann ist super! Andere TH-camr Reden lange um den Brei und du machst einfach ohne zu Reden und das gefällt mir so, weil man viel schneller ist. Es gibt auch einen TH-camr, dessen Name ich nicht sagen will, der lobt sich immer selbst und meint nur er sei der beste Bastler! Mach weiter so und bleib so wie du bist. LG aus Bayern.
Vielen Dank! Freut mich das es dir gefallen hat!
Amazing idea and design, love your manufacturing of your new vice. Thank you for sharing your amazing story. Be careful and safe. God bless you and your family.
Thanks Carsten! Stay safe!
Ollari's, thank you
Amazing idea! Funnily enough, I just received 4 of those pipe clamps and was looking for a vice option. Thank you, definitely going to build this, too!
Super! 2:37- Ich liebe es wie der Schnitt zur Musik passt! So geil! Danke dafür! Werd mir das auf jeden Fall bauen! Schlau konstruiert!
Dankeschön!
That quick release is pure genius! I sub'd just for that reason alone.
Thanks a lot!
Very nice job. I love the release system you got going there. I've seen these in the past and I always thought this would be a pain until now. Well done
Built one of the "poor man's vice" a couple years ago, have to adjust individual clamps, love your single lock release, will definitely integrate your design into my vice. Thanks for the video and design idea
This is the best version so far.
That was pretty smart. Excellent workmanship.
Thanks!
Really clever design I’m going to try this in my workshop.
Simply Rustic By Stearman and Sons TH-cam great.
Kerri McGreggor thank you
Simply Rustic By Stearman and Sons TH-cam cool little channel 👍
Awesome! Report back how it came out!
Ollari's I will if it’s half as good as yours I’ll be happy 😂
Great work & I really like the simplicity of that bench clamp! 😉😉👍👍
Thanks Steve!
I'm digging this one! I'll just have to figure out how to adapt it to the less expensive standard pony clamp. Thanks for inspiring me!
Bravo! Nice work.
The vise and the video are very well done. Keep it up.
Thank you!
Excellent! Im just making a similar vice right now. Something to consider.
Thanks Paul! Good luck with your vice!
Nice job on the quick release pipe clamp vise Friend! Thanks for sharing the video with us!💖👌👍😎JP
Love that vise. Think i need to have something like that in my workbench 👍
thanks for this video ... it will surely be a source of inspiration for some of us ... and a very practical and functional system .. a greeting
Thank you very much Felix!
Love the quick release nob...Awesome idea man
Thank you very much my friend!
Great build. I think my shop needs one.
3:09 why does everyone route out the tail pieces here ? I’ve never understood this especially since it’s so easy to drill through and mount. I ask bc I want to know what I’m missing as i didn’t do this with mine and always have been curious haha
Awesome idea! I may have to integrate that into my new workbench.
Awesome Idea for the single lever quick release! Thanks
Thanks Bill!
Beautiful job, dude! Really nicely done! 😃
Stay safe there, my friend! 🖖😊
Thanks! You too!
Awesome work Sebastian! 😃👍🏻👊🏻
Thanks a lot Fred!😊
Love your film making. Great design and build on the vise. Mahalo for sharing! : )
Thank you very much!
Super gebaut und ein sehr schönes Video 👍😀
Dankeschön Günter!
Awesome, design and idea.simple!
echt super gemacht immer ein Genus dir zuzusehen lg
Dankeschön 😊
Brilliant. Love the whole design and video.
Thanks Brian 😊👊
Clever! Nice work mate
Thanks!
I planned this type of vise for my bench, but I didn't know how to adjust the jaws. Thanks.
Very nice dude! Great job, thanks for sharing
Thanks for watching!
I couldn't see that you made the holes in the front jaw wide for it not to bind and to hold irregular pieces, but it seemed like it in the end?
Muy buen video, y la prensa aún más fabulosa 👏🏼👏🏼👏🏼😃
Super réalisation bravo,très astucieux, à bientôt salut Jeannot 🛠😉
Need to make one of these vises. Great job!!!!
Excellent DIY Bench Vise! One question.... I've never seen anyone do a free-hand router cut like that. How were you able to see the pattern lines under the router with all the wood chips flying off? Even more amazing is how precise the cut fit the clamp. Well done!
I'd also love to know the bit you used... 1/4" spiral, downcut, upcut, etc.
Top work there, my friend! Clever idea. :)
Thanks Matt!
Super idea the long clamp, but your table is very wiggle
Brilliant designing my friend 😊
Thanks 😊
Great Idea, good build, I think I will have to make this for my bench ....I had to mute my computer ... music no so great
Glad you enjoyed the project. That’s only what counts!
This was great and simple.
I'd a bet money you were going to make it foot released so you could use both hands retracting the moveable jaw. That's what mine will have...when I get around to building it. Nice job.
cool quick release
Another cool a$$ video Sebastian!! Thanks for sharing man!!!
Thanks man!
Esta genial la prensa, muy bonito y excelente trabajo!
Me quisiera armar una para mi taller pues no le he agregado una de esas saludos genio!
Hi. First of all I loved the idea. I wanted to ask you what is the name of the screw you used to do it. I am from Argentina and wanted to know how to find it here. From already thank you very much. Martin.
Great job 👍
Nice work ! Thank you Seb !
Thanks Remy!
Very nice indeed.
very nice work
thanks for the share.
Very ingenuous.
Very nicely made Sebastian. I see this quarantine didn’t slow you down hehe
Thanks 😊!A little bit, but we all have to make the best from it!
Eine klasse Idee Sebastian! Coole und einfache Lösung. :)
Vielen Dank! 😊
Great Idea. Good Video.
Good design. 👍
Nice project
Nice vise
Cool, Sebastian!
Billy
Awsome job mate 🤙🤙🤙
Thanks 😊
Nice linkage for release.
Una idea estupenda mui buen trabajo, un gran saludo y a seguir
Superbe cette étau .
Friggin genius!
Well done.
Very Nice
Thank you 😊
Great design! Very simple, where did you get the clamps with that one piece release?
Thanks. I bought them a t a local store.
sehr schönes video. gute lösung. und... ON AIR😃❤️
Immer! 😉
I happened to pick up a 3/4" threaded rod for a similar project. Would that work in place of the pipe?
Yes, that would work too.
I believe at 0:59 you could have used one more clamp.
For all the rest of you wondering where in the well do I find these bar clamps with the very unique little pull release lever they are available on Ebay and ?
Excellent! 👌
I feel like the clamps and nails was a bit belt and suspenders
The nails help keep the pieces aligned while clamping. I had many cases where the pieces slided. So belt and suspenders it is for me every time.
@@Ollaris The nails I get. I'm saying the nails were probably enough. Most of the tools you used here are pretty inexpensive, but that's still like $100 worth of clamps
Great concept!
Sempre bravo complimenti👍
Never seen pipe clamps like this before. Where did you get them with the quick release? Thanks.
Good job!!
another good work great buddy
Thank you very much!
It's very good.
Great idea! 👍🏻
Excellent !!!👌👍👍
Turns out there's a really good reason this style of pipe clamp is hard to find. They don't work consistently. I just spent about a month designing the upgrade of my work bench, collecting parts about $150 worth of parts, and building it only to find that the damn vise doesn't hold. WHATEVER YOU DO, THINK OF ANOTHER WAY to build a big moxon vise. I'm not blaming "Ollari", because his clamps probably worked fine. ALSO, drilling holes in those levers is nasty because they're hardened steel - not mentioned by Ollari, btw.
After crying in my soup for quite a while, I'm going to rebuild, this time with vise screws from Amazon or Lee Valley. I'm going to lose the quick-release feature, but there is no work-around for the damn pipe clamps not holding. I am so annoyed.
Excelente!!!!
Felicitaciones!!!
Always wondered why these aren’t more popular, they can be made for next to nothing.
Super Arbeit
Dankeschön Bernhard!
Coole Idee, gefällt mir
Dankeschön!
superbe travail .
Where did you get these clamps can’t find them anywhere????
Great idea on this, is there anyone who knows where to buy/source these type of pipe clamps in the uk? The lever release is unusual and difficult to find.
Brilliant
where did you get that style of pipe clamp with the lever?
EXCELLENT !
😊
Brilliant!
What kind of bar clamps are those? Do you have a link or recommendation?