[LeeMaker] Make A Moxon Vise Using plywood 18mm (FREE PLANS)
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- free plans : drive.google.c...
I made a Moxon Vise Using plywood 18mm
I made two laminated plywood.
Made of easily obtainable material.
If you have any help,
please Like & subscribe
Thank you.
Have a nice day
I was planing ro spend around 100$, with delivery, on Maxon wise and than I saw this video. Thank you for making it you saved me a lot of cash! Oh how I like when I stumble upon an cheap and easy solution that saves money!
Great wise! Simply, easy to make, and strong! Just perfect for me!
BUT! As a beginner, when I copy this for my new DIY workbench, I'll make the top of the front and back boards a little too high, and sand them down to aline perfect to the tabletop AFTER I've installed them.
To me, it's a lot easier (and wise :D ) to do than to lower the tabletop or make a new set of boards for the vise, if you make them a tiny fraction of an inch or millimeter too low! Ouch!
And perhaps make the front board a little thicker and drill 2 holes in them as well as some in the tabletop, for using dogs to tighten flat pieces with the vise.
Creativity is THE best tool to get things done and improve them .. or make mistakes! :D
Stay safe (y)
I was looking for an easy way to make the hand wheels. I've already made the vise. This was perfect and simple. Thanks!
Thank you for watching.
Have a nice day
Thank you for a clearly illustrated video - no language necessary with your great camera work. I have saved this video for reference.
Thank you for watching.
Have a nice day
Excellent video... I really appreciate the way you explained the dimensions and materials you used... thanks for the sharing...
Thank you for watching.
Have a nice day
I'm impressed! Bravo!
Greetings from Bulgaria and I do appreciate your FREE plans!
Thank you for watching.
Have a nice day
Execellent video. Only change I will make on mine is to have the the bolts shift inwards under the work bench instead of sticking out. Looks safer that way to me.
Thank you for watching.
Have a nice day
Awesome . Well done for you neat project and ideas. Thanks
Thank you for watching.
Have a nice day
Easy cheap and useful
Still … it s a bit annoying with that rods in front of ur hips belly or legs
Maybe u shall think a way keep the rods fully inside the bench
And show us🙏🙏🙏
정말 쉬운 노하우의 영상 감사합니다.
시청해주셔서 감사합니다.
있는재료로 간단하게 만들어 보았습니다.
좋은 휴일 오후 되세요 ^^
Nice design. At that height, the protruding shafts must be cause for some caution.
I like your homemade plywood circular knobs. I’m going to do the same on mine.
An excellent quick and effective side vice, thank you very much for the easy to follow video, BUT, possibly the worst background music I have ever heard on youtube. oh well.
Perfeito ! Adorei ! 🇧🇷
Thank you so much for sharing this. This is exactly what I can do and need for the moment 🙇🏽👊🏾
Just watched the video... this is what plan to do... Can you please reupload the link of the plan as the current link is not working. Thank you very much
Buena prensa Lee. A seguir trabajando 👍
Thank you so much!
Vary Cool. Nice and simple.
Thank you for watching.
Have a nice day
Great video and great design. I've seen this similar construction made very complicated. lol
Thank you for watching.
Have a nice day
Great idea that I will use too. CONGRATULATIONS.👍
Thank you for watching.
Have a nice day
This perfect! But, the link to the plans doesn't work...please fix.
Excellent work. I will be making my own very soon. I have also subscribed.
Thank you for watching.
Have a nice day
항상 쉽게 만드십니다. 그렇게 보이도록 간략하게 촬영하고 편집하는 능력이 탁월합니다.
시청해주셔서 감사합니다.
만드는과정에서 쉽게 따라하실수 있게 만들려고 노력하고 있습니다.
남은 휴일 즐겁게 보내세요 ^^
Mil gracias por el aporte.
Con seguridad lo llevaré a cabo!!!!
Dios contigo. ☝🏼😉
Nicely built
So beautiful job
Thank you for watching.
Have a nice day
Nice
It sounds easy to do .
Thanks
Thank you for watching.
Have a nice day
This was excellent .... thanks .
Muchas gracias. Saludos desde Argentina.
Simple and top! Great!!!
Thank you for watching.
Have a nice day
Nice vise
Very nice
영상 고맙습니다.
GOOD JOB..CONGRATILATIOS!!
Thank you for watching.
Have a nice day
Excelente Estimado!gracias!
Link for the plans is bad, do you have an updated link?
영상 잘 보았습니다... ^^
Please make the file available in Sketchup 2017 version.
Congratulations, the work is excellent.
Thank you for watching.
Have a nice day
Clever!
Thank you for watching and have a look other uploads. Lots of fun!
very nice thx for posting
Top
Great bi-lingual language. Thank you!
Thank you for watching.
Thanks Have a nice day
Excelente!👍,gracias a tu video inspirado
Thanks Have a nice day
Respect
Me gusta como poder usarlo y fabricarlo muy práctico gracias
*wears gloves in the shop to protect his hands from dangerous machinery*
*wears flip flops*
I think we can be friends.
Thank you for the advice.
Your google drive link does not work anymore
The Screws stick out all the time ...dangerous
Thank you for the advice.
Have a nice day
Add tennis balls to the ends of the rods to keep your tights safe says a retired nurse, now a woodworker.
классные тиски. лайк
Thanks Have a nice day
Like sempre
Thank you for watching.
Have a nice day
why didn't u make the knob as a bolt of moxon vise?
Dont have 18mm plywood. To expensive where I live. Is osb strong enough?
In my opinion, osb is not strong enough.
Thank you for watching.
Have a nice day
Genial!
잘봤습니다... 도면이 찾을수 없다는데요 구할수 있나요?
There really is no benefit to speeded up footage. I need to understand what is being done, how it is being done and the end result of each section. It is also very irritating to try and watch.
The “free plans” don’t appear to be available so a complete waste of time.
좋은영상 잘보고 좋아요 누르고 갑니다~ 저희 채널도 놀러오세용~ #핸섬드로잉
시청해주셔서 감사합니다.
좋은하루 되세요 ^^
PERIGOSO ESSAS BARRAS DE FERRO EXPOSTAS. COBRE COM UM PEDAÇO DE MADEIRA.