VMware NSX-T Fundamentals: Nested Homelab Video Tutorial
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- In my previous video, I explained how I configured a fully nested #VMware vSphere 7 #homelab environment. In this video, I show you how I deployed and configured #NSX-T 3.0 on top of that environment.
Previous video on setting up a nested vSphere 7 homelab: • VMware vSphere 7 Neste...
Blog: www.jeffreykus...
Twitter: / jeffreykusters - วิทยาศาสตร์และเทคโนโลยี
Hi Jeffrey. Thanks for this video and also the video of setting up nested vsphere. Both these videos helped me setup my home lab. Appreciate it!
GREAT! 👍
Hi jeffrey, thanks for the video. are the t0 will only support bgp? how about static route if i just get a block of IP address and not the BGP
What specifications of server is required to run this home lab, if you can share the details.
Hi Jaffrey, in the diagram you have connected fp-eth1 with vlan ID 11, but in video you didn't tagged in uplink profile, my question is how Edge VM will connect outside of NSX-T network?
Hello Jeffrey, I appreciate the videos you put out. I am new to NSX-T and this confuses me more than helps. I am trying to follow along to set my lab up the same but all of your stuff is preconfigured and running. I can't figure out how to get mine to marry yours. It appears that I can't fully grasp what right looks like. I would really like to get my Tier0 and Tier1 GWS set up. I followed your previous video and have a setup using 2 vyos routers. Is there any way you could put out a step by step how to or ping me to help me get past the sticking point?
Hi Jeffrey. You didn't show the segment "uplink-vlan" and it's configuration. I've tried to setup it myself and have got an error. It was about the downlink interface. You have told "I'll show you in a minute" about this segment but didn't show it.
I also created the whole setup and got stuck on the edges not getting the bgp state, ping works but only if uplink vlan in the vlan-tz segment is set to 0.
Not sure if this seems to work like that but i haven‘t been able to figure it out :(
Hi Jeffrey. Thanks for great contents.
What is the dashboard you are using for Homelab shown in the video?
Hi Chris. Thanks! Are you referring to the Remote Desktop client? That's Royal TS (www.royalapps.com/ts/mac/features). They are kind enough to provide NFR licenses to VMware vExperts.
Hi, what is the server specs of hosted esxi ?
It's a Supermicro server with an Xeon-D 1541with 128GB RAM. I also have a couple of (consumer grade) SSDs.
@@JeffreyKusters thanks