If I had a billion dollars i would give you a million. There is no other and i mean no other detailed description on how to disassemble a f4i down to the engine step by step in detail like you have done. And as a lover of these motorcycles i can say you have done so much for me making these videos and I really appreciate it.
@@jeffhumes really did because I have a cbr f4i that is a crashed bike and wanna check out the bearings and to see if they are good before fitting up everything and this video is gold 🥇 for helping me to do that instead of taking it to a mechanic.
Have this kind of issue for a while check everything is working fine, but sometimes it just decides not to prime. Starts working normaly the next day. Or even cuts off mid ride and bike works again when i press the clutch in. (All while moving). I chexked pump fuses , bas , battery, bypassed kick stand sensor. Seemed to work fine but it happened again. Bike works fine but i like all the issues sovled for good, any suggestions?
I this bike's case, it was a faulty connection in the connector that leads to the Bank-angle-sensor. Since your issue seems to be intermittent, and even happening during riding, I would believe that it could also be connector related. Try disconnecting and reconnecting all of your connectors (or at least the connectors that are in the front fairing). also while disconnected, pull slightly on the wires going into the connectors, I have had scenarios where the wires have just come a bit loose and need pushed back in. thanks for watching!
If I had a billion dollars i would give you a million. There is no other and i mean no other detailed description on how to disassemble a f4i down to the engine step by step in detail like you have done. And as a lover of these motorcycles i can say you have done so much for me making these videos and I really appreciate it.
A million would be awesome :) So happy that you are enjoying the videos!
@@jeffhumes really did because I have a cbr f4i that is a crashed bike and wanna check out the bearings and to see if they are good before fitting up everything and this video is gold 🥇 for helping me to do that instead of taking it to a mechanic.
@@JamesBrown-vt9kr glad to hear it! thanks for watching!
@@JamesBrown-vt9kr It makes me happy that this was useful to you! thanks for watching!!
Hi sir….i followed since the 1st episode…you can’t imagine how your videos and advices were useful for me…a billion thanx🙏
Glad you liked this and found it useful!!! thanks for watching!
Great series! Well worth the watch and would be very helpful for anyone who needs ot!
Thank you very much for watching!
Greetings from Russia!Great videos about f4i )
Thank you for watching! There will be more to come after I get over this covid crap!
i definately will be donating to you.
Thank you for watching! I will be making more videos of other bikes also!
Nice video, pay attention to the FI blinks on the dash, you have a poor or loose ECT sensor connection.
Thank you for watching, and thanks for the information!!
Have this kind of issue for a while check everything is working fine, but sometimes it just decides not to prime. Starts working normaly the next day. Or even cuts off mid ride and bike works again when i press the clutch in. (All while moving). I chexked pump fuses , bas , battery, bypassed kick stand sensor. Seemed to work fine but it happened again. Bike works fine but i like all the issues sovled for good, any suggestions?
I this bike's case, it was a faulty connection in the connector that leads to the Bank-angle-sensor. Since your issue seems to be intermittent, and even happening during riding, I would believe that it could also be connector related. Try disconnecting and reconnecting all of your connectors (or at least the connectors that are in the front fairing). also while disconnected, pull slightly on the wires going into the connectors, I have had scenarios where the wires have just come a bit loose and need pushed back in.
thanks for watching!
I’ve had same thing happen to me! I thought servo? Started happening to me after I laid the bike down, sliders saved the bike!!
@fixin_grillin_chillin a bit late, but i think regarding the prime, it wont prime if it already has pressure.
Thank you very much for watching!
Whats up man, i bought this same exact bike a few days ago, do you have any info on it?
I have tons of info, just ask your questions :)
Did you rebuild it after you found out it had low compression?
@@blaineyarbrough9458 I was about to, but a friend purchased it with the intention of rebuilding it themselves
🥇